AEG Oven BP871510KM User Manual

6.2 The menus in overview
Main menuSym-
bolMenu itemApplicationAssisted CookingContains a list of automatic programmes.Heating FunctionsContains a list of heating functions.PyrolysisPyrolytic cleaning.Basic SettingsYou can use it to set other settings.Favourite ProgrammeContains a list of favourite cooking programmes
created by the user.
Submenu for: Basic Settings
Sym-
bolSubmenuDescriptionSet Time of DaySets the current time on the clock.Time IndicationWhen ON, the display shows the current time
when...

Sym-
bolSubmenuDescriptionServiceShows the software version and configuration.Factory SettingsResets all settings to factory settings.6.3  Heating FunctionsHeating functionApplicationTrue Fan CookingTo bake on up to 3 shelf positions at the same
time and to dry food. Set the temperature 20 - 40
°C lower than for the function: Conventional
Cooking.Pizza SettingTo bake food on 1 shelf position for a more inten-
sive browning and a crispy bottom. Set the tem-
perature 20 - 40 °C lower than for the...

Heating functionApplicationMoist Fan BakingTo save energy when you bake and cook dry
baked goods. Also to bake baked goods in tins
on 1 shelf position. This function was used to de-
fine the energy efficiency class acc. EN50304.Dough ProvingFor controlled rising of yeast dough before bak-
ing.Bread BakingTo bake bread.Au GratinFor dishes such as lasagna or potato gratin. Also
to gratinate and brown.PreservingTo make vegetable preserves such as pickles.DryingTo dry sliced fruit (e.g. apples, plums,...

7. CLOCK FUNCTIONS7.1  Clock functions tableClock functionApplicationMinute MinderTo set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the
appliance is deactivated.
Use 
 to activate the function. Press  or
 to set the minutes and  to start.
DurationTo set the length of an operation (max. 23 h
59 min).End TimeTo set the switch-off time for a heating func-
tion (max. 23 h 59 min).If you set the time for a clock function,
the...

When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press a sensor field to stop the
signal.7.3  Heat + Hold
Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps
prepared food warm at 80 °C for 30
minutes. It activates after the baking or
roasting procedure ends.
You can activate or deactivate the
function in the menu: Basic Settings.
1. Activate the appliance.
2....

Dishes with the function: CT Sensor Au-
tomaticLoin of PorkRoast BeefScandinavian BeefLoin of GameLamb Joint, mediumBoned PoultryWhole Fish8.2  Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press 
 to confirm.
3. Select the category and dish. Press
 to confirm.
4. Select a recipe. Press 
 to confirm.
When you use the function:
Manual, the appliance...

The core temperature sensor
must stay in the meat and in
the socket during the
cooking.
1. Activate the appliance.
2. Put the tip of the core temperature
sensor into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the top of
the cavity.
The display shows the core temperature
sensor symbol.
4. Press 
 or  in less than 5
seconds to set the core temperature.
5. Set the heating function and, if
necessary, the oven temperature.
The appliance calculates an approximate...

Make sure you push back the telescopicrunners fully in the appliance before you
close the oven door.
9.3  Trivet and Grill- / Roasting
panWARNING!
Be careful when you remove
the accessories from a hot
appliance. There is a risk of
burns.
You can use the trivet to roast larger pieces of meat or poultry on one shelf
position.
1. Put the trivet into the deep pan so
that the supports of the wire shelf
point up.
2. Put the deep pan into the oven on
the necessary shelf position.
You can use the trivet to grill...

press  to overwrite an existing
programme.
You can change the name of a
programme in the menu: Edit
Programme Name.Activating the programme
1. Activate the appliance.
2. Select the menu: Favourite
Programme.
3. Press 
 to confirm.
4. Select your favourite programme
name.
5. Press 
 to confirm.
Press 
 to go directly to menu:
Favourite Programme. You can also use
it when the appliance is deactivated.
10.2  Using the Child Lock
The Child Lock prevents an accidental
operation of the appliance.
If the...

The Automatic switch-off
does not work with the
functions: Light, core
temperature sensor, End
Time, Duration.10.6  Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness: – when the appliance is activated.
– if you touch a sensor field during the night brightness (apart fromON / OFF), the display goes backto the day brightness mode forthe next 10 seconds....