AEG Lavamat 72650 User Manual
Here you can view all the pages of manual AEG Lavamat 72650 User Manual. The AEG manuals for Washing Machine are available online for free. You can easily download all the documents as PDF.
Page 31
2.Remove the conditioner insert from the middle compartment. 3.Clean all parts with water. 4.Put the conditioner insert in as far as it will go, so that it is firmly in place. 5.Clean all parts of the washing ma- chine, especially the nozzles in the top of the washing-in chamber, with a brush. 6.Insert the detergent dispenser drawer in the guide rails and push it in. Washing drum Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron. Important!Do...
Page 32
Drain pump The pump should be inspected regularly and particularly if the machine does not empty and/or spin the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: 1.Disconnect the appliance. 2.If necessary wait until the water has cooled down. 3.Open the pump door. 4.Place a container close to the pump to collect any spillage. 5.Release the emergency emptying hose, place it in the container and remove its cap. 6.When...
Page 33
33Care and cleaning 8.Put the cap back on the emergency emptying hose and place the latter back in its seat. 9.Screw the pump fully in. 10. Close the pump door. Warning! When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely retightened so as to stop leaks and young children being able to...
Page 34
7.replace the emergency emptying hose in its seat after having plugged it; 8.screw the pump again and close the door. Frost precautions If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows: 1.Close the water tap and unscrew the water inlet hose from the tap. 2.Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out. 3.Screw the water inlet hose back on and reposition the emergency...
Page 35
35Something not working Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below. During machine operation it is possible that the y ye el ll lo ow w Start/Pausepilot light flashes, one of the following alarm codes appears on the display and at the same some acoustic signals sound every 20 seconds to indicate that the machine...
Page 36
36Something not working Problem Possible cause/Solution The machine fills then empties immediately:The end of the drain hose is too low. Refer to relevant paragraph in «water drainage» section. The machine does not empty and/or does not spin: The drain hose is squashed or kinked. E20 Check the drain hose connection. The drain pump is clogged. E20 Clean the drain pump. The option has been selected. Disable the option . Select the option or . The laundry is not evenly distributed in the drum....
Page 37
37Something not working No water is visible in the drum: Machines based on modern technology operate very economically using very little water without affecting performance. Problem Cause possible/Solution The door will not open: The programme is still running. Wait the end of washing cycle. The door lock has not been released. Wait some minutes. There is water in the drum. Select drain or spin programme to empty out the water. The machine vibrates or is noisy: The transit bolts and packing have not...
Page 38
38Something not working If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. The display shows the alarm code: EF0 Anti-flooding system has activated. Disconnect the appliance and contact the Service Force Centre...
Page 39
39Technical data Techinical Data Dimensions Width Height Depth (door included)60 cm 85 cm 63 cm Electrical connection Voltage - Overall power - FuseInformation on the electrical connection is given on the rating plate on the inner edge of the appliance door Water supply pressureMinimum Maximum0,05 MPa 0,80MPa Maximum LoadCotton7 kg Spin SpeedMaximum1200 rpm 192998640 gb.qxd 13/08/2007 17.39 Pagina 39
Page 40
40Consumption value The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the highest temperature for each wash programme. (*) «Cottons Eco» at 60°C with a load of 7 kg is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards. Drain-- Spin-- Quick Intensive 60°501.05 Eco 60°(*)491.19...