AEG Lavamat 47080 Information Manual
Have a look at the manual AEG Lavamat 47080 Information Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 513 AEG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
User information 31You can now see the openings that must be closed with the caches in the pack attached to the washing machine; do not forget to fold down the central capsule. Make sure that you have removed all these parts from your washing machine and keep them so that you can use them again if you need them for future transport. If you want to keep your washing machine aligned with the adjacent furniture, you can cut the pipe support strip at the back of your washing machine. Leave the two side closers in place. Position Put the washing machine on a flat hard floor in a well ventilated room. Make sure that your washing machine does not touch the wall or any other furniture in the room. Moving your washing machine If you want to move your washing machine, lift it onto its rollers by pulling the lever at the bottom of the washing machine all the way to the left. When you have put your washing machine into the required location, put the lever back into its initial position.
User information32Leveling Precise leveling will prevent vibrations, noise and movements of the washing machine during operation. Make the washing machine level by adjusting the leveling screw that is too short. Unscrew the stand and locking collar assembly (lift the washing machine if necessary). When the washing machine is stable, maintain the stand on the ground and turn the locking collar as far as posible. Water inlet The «aqua-stop» is a measure of protection against the damages caused by the water. Indeed, the water inlet worns away by time and it can so deteriorate. In this case, the «aqua- stop» prevents the water from going into the appliance. The problem is indicated by the appearance of a red mark in the window «A». Close the water inlet tap and call the After Sales Service. Screw the supply pipe connector onto the water inlet tap (20x27 mm). Open the water inlet tap. You cannot prolong the water inlet pipe. If it is too short, call the After Sales Service.
User information 33Drain The drain siphon must be placed inside a drain pipe (or in a washbasin) at a height of between 70 and 100 cm. Make sure that it cannot fall. •Important: the drain pipe must never be pro- longed. If it is too short, call a professional. Electrical connection You can only connect this washing machine to 230 V single phase power supply. Check rating of the fuse line: 10 A at 230V. The washing machine must not be connected through an extension cable or a power bar. Check that the earthing connection is conform with the regulations in force.
User information34Technical characteristics Garantee conditions and After Sales Service Please contact our AEG agents’ of the country directly. DIMENSIONS Height Width Depth850 mm 400 mm 600 mm VOLTAGE / FREQUENCY TOTAL POWER230 V / 50 Hz 2300 W WATER PRESSURE Connection to the water networkMinimum Maximum0,05 MPa (0,5 bar) 0,8 MPa (8 bars) Type 20x27 This washing machine complies with CEE directive 89-336 about the limitation of radioelectric disturbances and directive CEE 73-23 for electrical safety.
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http: //www.aeg.hausgeraete.de ã Copyright by AEG 146 6494 00 - 06/04 From the Electrolux Group. The world’s No.1 Choice. The Electrolux Group is the world largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vaccum clea- ners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.