AEG Lavamat 14710 Vit Instruction Booklet

41
Something not working?
Spinning starts late or the
machine does not spin
The unbalance detection If the laundry is not evenly
device that prevents distributed inside the drum
excessive vibration during at the beginning of the
spinning has cut in. spin cycle, the machinedetects this and tries to
redistribute it more evenly
by means of a few drum
rotations.
Only when the laundry is
more evenly distributed
will the spin cycle be
performed, at a lower speed,
if the laundry is not evenly
distributed.
If,...

Unsatisfactory washing results
If the laundry looks grey and lime scale is found in the drum 
 Too little detergent has been used.
 An unsuitable detergent has been used.
 Stubborn stains have not been treated prior to washing.
 The programme/temperature has not been correctly selected.
If grey stains remain on the laundry
 Laundry stained with ointments, grease or oil has been washed with aninsufficient amount of detergent.
 The temperature selected for the wash programme was too low.
 Fabric softener...

Technical data
Height x Width x Depth 82x60x54.5 cm
Depth with door opened  95 cm
Height adjustment  ± 13 mm approx.
Load (depending on programme)  5 kg max.
Use domestic
Drum speed during washing max. 55 rpm
Drum speed during spinning  1200/900/700/500 rpm (L12710VIT)1400/900/700/500 rpm (L14710VIT)
Water pressure 0.05 - 0.8 MPa
This appliance complies with the following EC directives:
- 73/23/EEC of 19.2.1973 “Low voltage directive”, including directive 93 / 68 / EEC
- 89/336/EEC of 3.5.1989...

Service &Spare Parts
If after carrying out the necessary checks there is still a fault with your appliance
please contact your local AEG/ELECTROLUX Service Force Centre.
In guarantee customers should ensure that the suggested checks in the
“Troubleshooting” section have been made as the engineer will make a
charge if the fault is not a mechanical or electrical breakdown.
Please note that proof of purchase is required for in-guarantee service calls.
Service  &Spare Parts
If you require a service engineer...

45

Service &Spare Parts 
Customer care
For general enquiries regarding your AEG/ELECTROLUX appliance, or further
information on AEG/ELECTROLUX products please contact our Customer Care
Department at the address below or visit our website at www.aeg-electrolux.co.uk  
Customer Care Department
AEG/ELECTROLUX Major Appliances
Addington Way
Luton
Bedfordshire LU4 9QQ
Tel: 08705 350350*
*Calls to this number may be recorded for training purposes.
132984531.qxd  28/11/2005  16.32  Pagina  45
 

Guarantee Conditions
AEG/ELECTROLUX offer the following guarantee to the first purchaser of this
appliance.
1. The guarantee is valid for 12 months commencing when the appliance ishanded over to the first retail purchaser, which must be verified by pur-
chase invoice or similar documentation.
The guarantee does not cover commercial use.
2. The guarantee covers all parts or components which fail due to faulty workmanship or faulty materials. The guarantee does not cover appliances
where defects or poor...

European Guarantee
If you should move to another country within Europe then your guarantee
moves with you to your new home subject to the following qualifications:\
- The guarantee starts from the date you first  purchased your product.
- The guarantee is for the same period and to the same extent for labourand parts as exist in the new country of use for this brand or range of
products.
- This guarantee relates to you and cannot be transferred to another user.
- Your new home is within the European...

Instructions for installation and electrical con-
nection
Safety instructions for the installer
 This appliance is heavy, care should be taken when moving it.
 When unpacking the appliance, check that it is not damaged. If in doubt,\
do not use it and contact the retailer.
 All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protec-
tive transit devices are not removed or are not completely removed. Refer
to the...

Dimensions of the appliance
Front view and side view
Rear view
49





\b	
\f

\f \f
\f
\f \f
\f
\f
\f
	\f
	
\f\f
\f\f\f\f
\f\f



  



 \b

  
   
\b	 \b

!

  

 
\b	
\f\f
\b



	! 


	

\f

\f \f
	#	!!

 !

   

\b	

\b
 




\b
 \b\f	

...

Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.Using the supplied spanner, unscrew
and remove the rear right-hand bolt and lay
the machine on its back, taking care not to
squash the hoses. This can be avoided by plac-
ing one of the corner packing pieces between
the machine and the floor.
Remove the polystyrene base and take off the
bottom panel by
unscrewing the
central screw.
Carefully slide out
the right poly-
thene bag.
Repeat the opera-
tion for the...