AEG Integrated fridge freezer SCS61400S2 User Manual
Here you can view all the pages of manual AEG Integrated fridge freezer SCS61400S2 User Manual. The AEG manuals for Fridge freezer are available online for free. You can easily download all the documents as PDF.
Page 11
ProblemPossible causeSolution Food products placed in the appliance were too warm.Allow food products to cool to room temperature before storing.The door is not closed cor- rectly.Refer to "Closing the door".There is too much frost and ice.The door is not closed cor- rectly or the gasket is de- formed/dirty.Refer to "Closing the door".The water drainage plug is not correctly positioned.Position the water drainage plug in the correct way.Food products are not wrap- ped properly.Wrap the...
Page 12
ProblemPossible causeSolutionThere is no cold air circula- tion in the appliance.Make sure that there is cold air circulation in the appli- ance.There is too much con- densed water on the rear wall of the refrigerator.Door was opened too fre- quently.Open the door only when necessary.Door was not closed com- pletely.Make sure the door is closed completely.Stored food was not wrap- ped.Wrap food in suitable pack- aging before storing it in the appliance.Door does not open easily.You attempted to re-open...
Page 13
8. INSTALLATIONWARNING! Refer to Safety chapters.8.1 LocationRefer to the assembly instructions for the installation. To ensure best performance, install the appliance well away from sources of heat such as radiators, boilers, direct sunlight etc. Make sure that air can circulate freely around the back of the cabinet. 8.2 Positioning Install the appliance in a dry, well ventilated indoors where the ambient temperature corresponds to the climateclass indicated on the rating plate of theappliance....
Page 14
•D - blue: Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol or coloured green and yellow. 2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. 3. Connect the wire coloured brown to the terminal either marked...