AEG Integrated fridge freezer SCN71800S1 User Manual

SCN71800S1EN User manual 

CONTENTS
1.SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
2.CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
3.DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
4.HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

1.  SAFETY INSTRUCTIONS
In the interest of your safety and to en-
sure the correct use, before installing
and first using the appliance, read this
user manual carefully, including its hints
and warnings. To avoid unnecessary mis-
takes and accidents, it is important to
ensure that all people using the appli-
ance are thoroughly familiar with its op-
eration and safety features. Save these
instructions and make sure that they re-
main with the appliance if it is moved or
sold, so that everyone using it...

WARNING!
Any electrical component (power
cord, plug, compressor) must be
replaced by a certified service
agent or qualified service per-
sonnel to avoid hazard.
1.Power cord must not be length-
ened.
2.Make sure that the power plug is
not squashed or damaged by the
back of the appliance. A squashed
or damaged power plug may
overheat and cause a fire.
3.Make sure that you can come to
the mains plug of the appliance.
4.Do not pull the mains cable.
5.If the power plug socket is loose,
do not insert the...

• The appliance must not be located
close to radiators or cookers.
• Make sure that the mains plug is ac-
cessible after the installation of the ap-
pliance.
• Connect to potable water supply only
(If a water connection is foreseen).
1.6 Service
• Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person.
• This product must be serviced by an
authorized Service Centre, and only
genuine spare parts must be used.
1.7 Environment...

9Alarm indicator
10Child Lock function
11Minute Minder function
2.2 Switching on
To switch on the appliance do these
steps:
1.Connect the mains plug to the pow-
er socket.
2.Press the appliance ON/OFF button
if the display is off.
3.The alarm buzzer could operate af-
ter few seconds.
To reset the alarm refer to "High
temperature alarm".
4.If "dEMo" appears on the display,
the appliance is in demonstration
mode. Refer to "WHAT TO DO IF..."
paragraph.
5.The temperature indicators...

1.Remove any drinks contained in the
freezer compartment.
2.Press OK button to switch off the
sound and terminate the function.
It is possible to deactivate the function
at any time during the countdown:
1.Press the Mode button until the Mi-
nute Minder indicator flashes.
2.Press the OK button to confirm.
3.The Minute Minder indicator goes
off.
It is possible to change the time during
the countdown and at the end by press-
ing the Temperature colder button and
the Temperature warmer button.
2.8 Child...

The fridge temperature indicator
shows the set temperature.
2.Press the OK button to confirm.
The Holiday indicator is shown.
To switch off the function:
1.Press the Mode button until the Hol-
iday indicator flashes.
2.Press the OK button to confirm.
3.The Holiday indicator goes off.
The function switches off by se-
lecting a different fridge set tem-
perature.
2.13 FROSTMATIC function
To switch on the function:
1.Press the Mode button until the cor-
responding icon appears.The FROSTMATIC indicator...

In the event of accidental de-
frosting, for example due to a
power failure, if the power has
been off for longer that the value
shown in the technical character-
istics chart under "rising time",
the defrosted food must be con-
sumed quickly or cooked imme-
diately and then re-frozen (after
cooling).
3.4 Thawing
Deep-frozen or frozen food, prior to be-
ing used, can be thawed in the refrigera-
tor compartment or at room tempera-
ture, depending on the time available
for this operation.
Small...

3.9 Positioning the sliding box
The sliding box can be placed at differ-
ent heights.
Do make these adjustments proceed as
follow:
1.lift the shelf with the sliding box up-
wards and out of the holders in the
door
2.remove the retaining bracket out of
the guide under the shelf
3.Reverse the above operation to in-
sert the sliding box at a different
height.
4. HELPFUL HINTS AND TIPS
4.1 Hints for energy saving
• Do not open the door frequently or
leave it open longer than absolutely
necessary.
• If the...