AEG Integrated dishwasher F99705VI1P User Manual

option and Done. If you want toselect another option select again Add option otherwise select 
Done.
9. Press the  OK key.
If the programme has the TimeSaver
option, you have to select Fast or 
Normal.10. Press the  OK key to confirm.
The display confirms that the 
MyFavourite programme has been
saved.7.  OPTIONS7.1  Option listOptionsValuesDescriptionDelay startFrom 1 to 24 hours
OFF (default value)Delay the start of the pro-
gramme.AutoOpenON (default value)
OFFThe use of this option saves
energy by...

When the programme is completed or is
cancelled the options are set to the
default values.
1. Press the  Option key.
2. Select an option.
The display shows the option value indicated in parenthesis.
3. Press the  OK key to change the value
from OFF to ON or vice versa.
If the selected option is Delay start, when
you press the  OK key the display shows
the number of hours available for the
delay start. Select the number of hours
and press again the  OK key to confirm.
4. To go back to the programme list,...

8. BEFORE FIRST USE1.Set the language.
• Press  OK to confirm English.
• Scroll the list of available languages for a new language
and press  OK to confirm.
2. Make sure that the current level of the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water softener.
3. Fill the salt container.
4. Fill the rinse aid dispenser.
5. Open the water tap.
6. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent...

How to fill the salt container1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (Only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap of the salt container
clockwise to close the salt container.
Water and salt can come out
from the salt container when
you fill it. Risk of corrosion. To
prevent it, after you fill the salt
container, start a...

• If the display shows the rinse aidrefilling message, fill the rinse aid
dispenser.
3. Load the baskets.
4. Add the detergent. If you use multi-
tablets, activate the option Multitab.
5. Set and start the correct programme
for the type of load and the degree
of soil.9.1  Using the detergentCAUTION!
Only use detergent specifically designed for
dishwashers.
1. Press the release button ( A) to open
the lid ( C).
2. Put the detergent, in powder or
tablets, in the compartment ( B).
3. If the programme has a...

Opening the door while the
appliance operates
If you open the door while a programme is running, the appliance stops. When
you close the door, the appliance
continues from the point of interruption.If the door is opened for more
that 30 seconds during the
drying phase, the running
programme will end. This will
not happen when programme
ECO with AutoOpen is
running.Cancelling the delay start while
the countdown operates
When you cancel the delay start the
programme and the options are set to
their default...

10.2 Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent for dishwasher. Other products cancause damage to the appliance.
• Multi-tablets are usually suitable in areas with a water hardness up to 21°dH. In areas exceeding this limit,
rinse aid and salt must be used in
addition to the multi-tablets.
However, in areas with hard and very
hard water we recommend to use
solo-detergent (powder, gel, tablets
without additional functions), rinse aid
and salt separately for optimal...

11. CARE AND CLEANINGWARNING!
Before maintenance,
deactivate the appliance and
disconnect the mains plug
from the main socket.Dirty filters and clogged spay
arms decrease the washing
results. Make a check regularly
and, if necessary, clean them.11.1  Cleaning the filters
The filter system is made of 3 parts.
1.Turn the filter ( B) counterclockwise
and remove it.
2. Remove the filter ( C) out of filter ( B).
3. Remove the flat filter ( A).
4. Wash the filters.
5.Make sure that there are no residues
of...

CAUTION!
An incorrect position of the
filters can cause bad washing
results and damage to the
appliance.11.2  Cleaning the spray arms
Do not remove the spray arms. If the
holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.11.3  External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive cleaning pads or solvents.
11.4  Internal cleaning
• Carefully clean the appliance,
including the...

ProblemPossible solutionThe appliance does not fill with
water.
The display shows the message: 
Appliance is not filling water.• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too low. For this information, contact your local
water authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not clog- ged.
• Make sure that the inlet hose has no kinks or bends.The appliance does not drain the
water.
The display...