AEG Integrated dishwasher F55700VI0P User Manual

7.1 XtraDry
Activate this option when you want to boost the drying performance. With the use of this option, the duration of someprogrammes, water consumption andthe last rinse temperature can be
affected.
The option XtraDry is not a permanent
option and must be selected at every
cycle.How to activate XtraDry
Press . The related indicator comes
on.
If the option is not applicable to the
programme, the related indicator does not come on or it flashes quickly for afew seconds and then goes off.
The display...

5.Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out of the salt container when
you fill it. After you fill the
salt container, immediately
start a programme to
prevent corrosion.8.2  How to fill the rinse aid
dispenserCAUTION!
Only use rinse aid
specifically designed for dishwashers.
1. Open the lid ( C).
2. Fill the dispenser ( B) until the rinse
aid reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent...

9.1 Using the detergentCAUTION!
Only use detergent specifically designed for
dishwashers.
1. Press the release button ( A) to open
the lid ( C).
2. Put the detergent, in powder or
tablets, in the compartment ( B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
9.2  Setting and starting a
programmeThe Auto Off function
This function decreases energy
consumption by...

Cancelling the programmePress and hold  Reset until the appliance
is in programme selection mode.
Make sure that there is detergent in the detergent dispenser before you start anew programme.End of programme
When the programme is completed and
you open the door, the appliance is
automatically deactivated.
Close the water tap.10.  HINTS AND TIPS10.1  General
The following hints will ensure optimal cleaning and drying results in daily use
and also help to protect the
environment.
• Remove larger residues...

• Make soft the remaining burned foodon the items.
• Put hollow items (cups, glasses and pans) with the opening down.
• Make sure that cutlery and dishes do not bond together. Mix spoons with
other cutlery.
• Make sure that glasses do not touch other glasses.
• Put small items in the cutlery basket.
• Put light items in the upper basket. Make sure that the items do not
move.
• Make sure that the spray arm can
move freely before you start a
programme.10.5  Before starting a
programme
Make sure that:
• The...

2.Remove the filter ( C) out of filter ( B). 
3. Remove the flat filter ( A).
4. Wash the filters.
5.Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter ( A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters ( B) and ( C).
8. Put back the filter ( B) in the flat filter
( A ). Turn it clockwise until it locks.CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage...

4.To engage again the spray arm to
the basket, press the spray arm
upwards in the direction indicated by the lower arrow and simultaneouslyturn it counterclockwise until it locks
into place.
11.3  External cleaning
• Clean the appliance with a moist soft cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive cleaning pads or solvents.11.4  Internal cleaning
• Carefully clean the appliance,
including the rubber gasket of the
door, with a soft damp cloth.
• If you use short duration...

Problem and alarm codePossible cause and solutionYou cannot activate the ap-
pliance.• Make sure that the mains plug is connected to the mains socket.
• Make sure that there is no damaged fuse in the fuse box.The program does not start.• Make sure that the appliance door is closed.• If the delay start is set, cancel the setting or wait for the end of the countdown.
• The appliance has started the procedure to recharge the resin inside the water softener. The duration of the
procedure is approximately 5...

Problem and alarm codePossible cause and solutionRattling/knocking sounds
from inside the appliance.• The tableware is not properly arranged in the baskets. Refer to basket loading leaflet.
• Make sure that the spray arms can rotate freely.The appliance trips the cir-
cuit-beaker.• The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the applian-
ces in use.
• Internal electrical fault of the appliance....

ProblemPossible cause and solutionThe dishes are wet.• For the best drying performance activate the optionXtraDry.
• The programme does not have a drying phase or has a drying phase with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a different brand or activate the rinse aid dispenser and
use rinse aid and multi-tablets together.
• Keep the dishwasher door ajar for some time before removing...