AEG Integrated dishwasher F55700VI0P User Manual

ENUser ManualDishwasherF55700VI0P    

CONTENTS
1. SAFETY INFORMATION.................................................................................................3
2.  SAFETY INSTRUCTIONS................................................................................................ 4
3.  PRODUCT DESCRIPTION.............................................................................................. 5
4.  CONTROL PANEL........................................................................................................... 6
5....

1.  SAFETY INFORMATION
Before the installation and use of the appliance,carefully read the supplied instructions. The manufacturer is not responsible for any injuries ordamages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1  Children and vulnerable people safety
•This appliance can be used by children aged 8 years
and above and by persons with reduced capabilities
provided that they have been given...

•Put knives and cutlery with sharp points in the cutlery
basket with the points down or in a horizontal position.
• Do not keep the appliance door open without
supervision to prevent to fall on it.
• Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
• Do not use high pressure water sprays and/or steam
to clean the appliance.
• The ventilation openings in the base (if applicable)
must not be obstructed by a carpet.
• The appliance is to be connected...

• Ensure that there are no visible waterleaks during and after the first use ofthe appliance.
• If the water inlet hose is damaged, immediately close the water tap and
disconnect the mains plug from the
mains socket. Contact the Authorised
Service Centre to replace the water
inlet hose.2.4  Use
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous. Obey the safety
instructions on the detergent
packaging.
• Do not drink and play with the water in the appliance.
• Do not remove the...

11Upper basket12Cutlery drawer3.1 Beam-on-Floor
The Beam-on-Floor is a light that is
displayed on the floor below the
appliance door.
• When the programme starts, a red light comes on and stays on for the
duration of the programme.
• When the programme is completed, a green light comes on.• When the appliance has amalfunction, the red light flashes.The Beam-on-Floor goes off
when the appliance is
deactivated.4.  CONTROL PANEL1On/off button2
Display
3
Delay  button
4
Programme button (down)
5
Programme...

ProgrammeDegree of soil
Type of loadProgramme phasesOptionsP2
 
2)• All
• Crockery, cut- lery, pots and
pans• Prewash
• Wash from 45 °C to 70 °C
• Rinses
• Dry• XtraDryP4
 
3)• Heavy soil
• Crockery, cut- lery, pots and
pans• Prewash
• Wash 70 °C
• Rinses
• Dry• TimeSaver
• XtraDryP6• Normal or light soil
• Delicate crock- ery and glass-
ware• Wash 45 °C
• Rinses
• Dry• XtraDryP8
 
4)• Fresh soil
• Crockery and cutlery• Wash 60 °C
• Rinses• XtraDry1)  With this programme you have the most efficient use...

5.2 Information for test
institutes
For all the necessary information for testperformance, send an email to:info.test@dishwasher-production.com
Write down the product number (PNC)that is on the rating plate.6.  SETTINGS6.1  Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener according to the water hardness.
• The...

German de-grees (°dH)French degrees (°fH)mmol/lClarke de-greesWater softener lev- el4 - 107 - 180.7 - 1.85 - 122

you always use rinse aid for best drying
performance.
If you use standard detergent or multi- tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.How to deactivate the rinse
aid empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously 
 and  until
the indicators 
, ,  and start to flash and the display is blank.
2. Press 
.
• The indicators 
,  and  go
off.
• The indicator 
 continues to...