AEG Freestanding washer dryer L76680WD User Manual

							Programme
Temperature
rangeMaximum load
Maximum spin
speedProgramme description
(Type of load and soil level)
Easy Iron
60°C - Cold
3.5 kg
800 rpmSynthetic items to be gentle washed . Normal and
light soil.1)
Delicates
40°C - Cold
3.5 kg
1200 rpmDelicate fabrics as acrylics, viscose, polyester
items . Normal soil.
Wool/Silk
40°C - Cold
1.5 kg
1200 rpmMachine washable wool, hand washable wool
and delicate fabrics  with «hand washing» care sym-
bol.2)20 Min. - 3 Kg
40°C - 30°C3 kg
1200 rpmCottons and synthetics items with light soil level
or worn only once.
Rinse
8 kg
1600 rpmTo rinse and spin the laundry.  All fabrics.
Spin/Drain
3)8 kg
1600 rpmTo spin the laundry and to drain the water in the
drum.  All fabrics .Drying programmes
Wool dry
1 kgDrying programme for  woollen.
Synthetics dry
2 kgDrying programme for  synthetic items.
Cottons dry
4 kgDrying programme for  cotton items.
Wash/Dry 60 min.
40°C - 30°C
1 kg
1200 rpmComplete programme composed of washing phase
and of drying phase for a small load size of mixed
fabrics (cottons and synthetics items).Saving energy programmesSuper Eco
Cold3 kg
1200 rpmMixed fabric  (cotton and synthetic items)4).ENGLISH11          
						

							Programme
Temperature
rangeMaximum load
Maximum spin
speedProgramme description
(Type of load and soil level)
Cottons Eco
5)
60°C - 40°C
8 kg
1600 rpmWhite cotton and colour-fast cotton . Normal soil.
The energy consumption decreases and the time of
the washing programme is extended.1)  To reduce the creases of the laundry, this cycle regulates the water temperature and performs a soft
wash and spin phase. The appliance adds some rinses. This programme is not compatible with drying.
2)  During this cycle the drum rotates slowly to ensure a gentle washing. It can seem that the drum
doesn't rotate or doesn't rotate properly. Consider this as a normal functioning of the appliance. 3)  Set the spin speed. Make sure it agrees with the laundry. If you set No Spin option the only drain
phase is available.
4)  This programme is for daily use and has lowest energy and water consumption maintaining a good
washing performance.
5)  The washing programme Cottons Eco at 60ºC with a load of 8 kg and the drying programme Cottons
dry are the reference programmes for the data entered in the energy label, in compliance with EEC
92/75 standards.The water temperature of the washing phase may differ from the temperature declared
for the selected programme.
Programme options compatibility
ProgrammeSpinExtra
Rinse1)Time Save2)Delay StartCottons■ ■■■■Cottons + Prewash■ ■■■■Synthetics■ ■■■■Synthetics + Prewash■ ■■■■Easy Iron■ ■■■■Delicates■ ■■■■Wool/Silk■ ■  ■20 Min. - 3 Kg■    ■Rinse■ ■■ ■Spin/Drain3)■■   ■Super Eco■ ■  ■www.aeg.com12     
						

							ProgrammeSpinExtra
Rinse1)Time Save2)Delay StartCottons Eco■ ■■■ 4)■1)  If the Permanent Extra Rinse option is activated, the appliance adds some additional rinses. In the
Rinse programme, if you set a low spin speed the appliance performs delicate rinses and a short spin. 2)  If you set a shorter duration, we recommend that you decrease the quantity of the load. It is possible
to load fully the appliance, however the washing results are reduced. 3)  Set the spin speed. Make sure it agrees with the laundry. If you set No Spin option the only drain
phase is available.
4)  For this programme you can set only the Extra Quick duration.5.2  Programmes for automatic dryingDryness LevelType of fabricLoad Extra Dry
For towelling materialsCottons and Linen
(bathrobes, bath towels, etc)up to 4 kg  Cupboard Dry1)
For items to put away
Cottons and Linen
(bathrobes, bath towels, etc)up to 4 kgSynthetics and mixed fab-
rics
(jumpers, blouses, under-
wear, household linen)up to 2 kg  Iron Dry
Suitable for ironingCottons and Linen
(sheets, tablecloths, shirts,
etc)up to 4 kg1)  Hints for test institute  The test performance, in accordance with EN 50229, must be carried out with
a FIRST drying load of the maximum declared drying capacity (load composition according to EN61121)
by setting the AUTOMATIC CUPBOARD DRY programme for Cotton. The SECOND drying load with the residual load must be tested by setting the AUTOMATIC CUPBOARD DRY programme for Cotton.5.3  Programmes for timed dryingDryness LevelType of fabricLoad
(kg)Spin
speed
(rpm)Suggested
duration
(mins)Extra Dry
For towelling materialsCottons and Linen
(bathrobes, bath towels, etc)41600155 - 1702160085 - 1001160060 - 70ENGLISH13      
						

							Dryness LevelType of fabricLoad
(kg)Spin
speed
(rpm)Suggested
duration
(mins)Cupboard Dry
For items to put awayCottons and Linen
(bathrobes, bath towels, etc)41600145 - 1602160075 - 901160050 - 60Cupboard Dry
For items to put awaySynthetics and mixed fab-
rics
(jumpers, blouses, under-
wear, household linen)21200100 - 1151120050 - 60Iron Dry
Suitable for ironingCottons and Linen
(sheets, tablecloths, shirts,
etc)41600110 - 1302160060 - 701160040 - 50Wool dryWool
(wool jumpers)1120085 - 1055.4  Woolmark Apparel Care -
Blue
• The wool wash cycle of this machine has been approved by The Woolmark
Company for the washing of wool
garments labelled as «hand wash»
provided that the garments are
washed according to the instructions
issued by the manufacturer of this
washing machine. Follow the garment
care label for drying and other
laundry instructions. M1380
• The wool drying cycle of this machine has been approved by The WoolmarkCompany for the drying of woolgarments labelled as «hand wash»
provided that the garments are dried
according to the instructions issued
by the manufacturer of this machine.
Follow the garment care label for other laundry instructions. M1381
In UK, Eire, Hong Kong and India the
Woolmark symbol is a certification trademark.6.  CONSUMPTION VALUESThe data of this table are approximate. Different causes can change the
data: the quantity and type of laundry, the water and ambient tempera-ture.www.aeg.com14     
						

							At programme start the display shows the duration programme for themaximum load capacity.
During the washing phase the programme duration is automatically cal- culated and can be greatly reduced if the laundry load is lower than themaximum load capacity (e.g. Cotton 60°C, maximum load capacity 8 kg,the programme duration exceeds 2 hours; real load 1 kg, the pro-
gramme duration don’t reach 1 hour).
When the appliance is calculating the real programme duration a dot blinks in the display.ProgrammesLoad
(kg)Energy
consump-
tion (kWh)Water con-
sumption (li-
tre)Approximate pro-
gramme duration
(minutes)Cottons 60 °C81.3567175Cottons Eco
Cotton Energy Saving Pro-
gramme 60 °C1)
81.0263235
Cottons 40 °C80.8567170Synthetics 40 °C3.50.4048115Delicates 40 °C3.50.505580Wool/Handwash 30 °C1.50.2545601)  «Cotton Energy Saving programme » at 60°C with a load of 8 kg is the reference programme for the
data entered in the energy label, in compliance with EEC 92/75 standards.7.  OPTIONS7.1  Temperature
Set this option to change the default
temperature.
Indicator 
 = cold water.
The display shows the set temperature.
7.2  Spin
With this option you can decrease the
default spin speed.
The display shows the indicator of the set
speed.
Additional spin options:
No Spin
• Set this option to remove all spin phases.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
• The display shows the indicator
 .
Rinse Hold
• Set this option to prevent the laundry creases.
• The washing programme stops with the water in the drum. The drum turns
regularly to prevent the laundry
creases.
• The door stays locked. You must drain the water to unlock the door.
• The display shows the indicator 
 .
To drain the water refer to
‘At the end of the
programme’.ENGLISH15      
						

							7.3 Drying level
Press this button to set one of 3
automatic dryness levels proposed by
the appliance. The display shows the
symbol of the set level:
•
Iron dry  – laundry to be ironed
•
Cupboard dry  – laundry to be put
in store
•
Extra dry  – laundry to be fully
dried
You  cannot  set all
automatic levels for each
type of fabrics.7.4  Drying time
Press this button to set the time that suits
the fabrics you have to dry. The display
shows the set value.
Each time you press this button the time
value increases by 5 minutes.
You  cannot  set all time
values for different types of
fabrics.7.5  Time Save
With this option you can decrease the
programme duration.
• Press this button one time to set 'Shortened duration' for items with
daily soil.
• Press this button two times to set 'Extra Quick' for items with almost no
soil.
Some programmes accept
only one of the two options.7.6  Delay Start
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The display shows the related indicator
and delay time.
8.  SETTINGS8.1  Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To  deactivate/activate  the acoustic
signals, press Drying Level and Drying Time at the same time for 6 seconds.If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.8.2  Child Lock 
With this option you can prevent that the
children play with the control panel.
• To  activate/deactivate  this option,
press Temp. and Spin at the same
time until the indicator 
  comes on/
goes off .
You can activate this option:
• After you press Start/Pause : the options and the programme knob arelocked.
• Before you press Start/Pause : the appliance cannot start.
8.3  Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a newprogramme.
• To  activate/deactivate  this option
press Time Save and Delay Start at the same time until the indicator ExtraRinse  comes on/goes off .
9. BEFORE FIRST USE1.Put 2 litre of water in the detergent
compartment for washing phase.This activates the drain system.www.aeg.com16          
						

							2.Put a small quantity of detergent in
the compartment for washing phase.
3. Set and start a programme for cotton
at the highest temperature without
laundry.This removes all possible dirt from the
drum and the tub.10.  DAILY USE10.1  Loading the laundry
1. Open the appliance door
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry
in the drum.
4. Close the door firmly.CAUTION!
Make sure that no laundry stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.10.2  Filling the detergent and
additivesCompartment for prewash phase,
soak programme or stain remover.Compartment for washing phase.Compartment for liquid additives
(fabric conditioner, starch).Maximum level for quantity of liquid
additives.Flap for powder or liquid detergent.Always obey the instructions
that you find on the
packaging of the detergent
products.10.3  Check the position of the
flap
1. Pull out the detergent dispenser until
it stops.
2. Press the lever down to remove the
dispenser.
3. To use powder detergent, turn the
flap up.
ENGLISH17         A  
						

							4.To use liquid detergent, turn the flap
down.
With the flap in the
position DOWN: • Do not usegelatinous or thick
liquid detergents.
• Do not put more liquid detergent than
the limit showed in
the flap.
• Do not set the prewash phase.
• Do not set the delay start function.
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent
dispenser.
Make sure that the flap does not cause a blockage when you close the drawer.
10.4  Activating the appliance
1.Open the water tap.
2. Connect the mains plug to the mains
socket.
3. Press button On/Off to activate the
appliance.
A short tune sounds.10.5  Setting a programme
1.Turn the programme knob and set
the programme: • The related programme indicator comes on.
• The indicator of Start/Pause flashes.
• The display shows: the default temperature, the spin speed, the
indicators of the programme
phases and the programme
duration.
2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options. When you activate an
option, the indicator of the set
option comes on.
If you set something
incorrect, the display shows
the message  Err.10.6  Starting a programme
without the delay start
Press button Start/Pause to start the
programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase is operation starts to flash.
The programme starts, the door is locked. The display show the indicator
.
The drain pump can operate
for a short time when the
appliance fills water.www.aeg.com18 B      
						

							10.7 Behaviour of the
applianceAfter approximately 15
minutes from the start of the
programme:
• The appliance adjusts automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
• The display shows the new time value.10.8  Starting a programme
with the delay start
1. Press button Delay Start again and
again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
2. Press button Start/Pause.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the programme starts automatically.
Before you press button
Start/Pause to start the
appliance, you can cancel or
change the set of the delay
start.10.9  Cancelling the delay start
To cancel the delay start:
1. Press button Start/Pause to set the
appliance to pause.
The related indicator flashes.
2. Press button Delay Start repeatedly
until the display shows 
.
3. Press button Start/Pause again to
start the programme immediately.
10.10  Interrupting a
programme and changing a
function
You can change only some options before they operate.
1. Press button Start/Pause.
The related indicator flashes.
2. Change the function set.
3. Press the button Start/Pause again.
The programme continues.10.11  Cancelling a running
programme
1. Press button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press button On/Off again to activate
the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.10.12  Opening the doorIf the temperature and level
of the water in the drum are
too high and the drum still
rotates you cannot open the
door.
While a programme or the delay start operates, the appliance door is locked.
1. Press button Start/Pause.
In the display the related door lock
indicator goes off.
2. Open the appliance door.
3. Close the door and press button
Start/Pause.
The programme or the delay start
continues.
10.13  End of cycle
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates (if it is active).
In the display 
 comes on and the door
locked indicator 
 goes off.
The indicator of Start/Pause button goes
off.
1. Press button On/Off to deactivate
the appliance.
ENGLISH19        
						

							After five minutes from the end of theprogramme, the energy saving function
automatically deactivates the appliance.When you activate the
appliance again, the display
show the end of the last set
programme. Turn the
programme knob to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door ajar, to prevent
mildew and odours
10.14  Draining water out after
end of cycle
The washing programme is completed,
but there is water in the drum :
The drum turns regularly to prevent the creases in the laundry.
The door lock indicator 
 is on. The
door stays locked.
You must drain the water to open the door:
1. If necessary, decrease the spin
speed.
2. Press the Start/Pause button.
The appliance drains the water and
spins.
3. When the programme is completed
and the door lock indicator 
 goes
off, you can open the door .
4. Press On/Off some seconds to
deactivate the appliance.The appliance drains and
spins automatically after
approximately18 hours.10.15  AUTO Stand-by option
The AUTO Stand-by function
automatically deactivates the appliance to decrease the energy consumption
when:
• You do not use the appliance for 5 minutes before you press Start/Pausebutton.
Press the button On/Off to activate
the appliance again.
• After 5 minutes from the end of the washing programme
Press the button On/Off to activate
the appliance again.
The display shows the end of the last
set programme.
Turn the programme knob to set a
new cycle.
If you set a programme or an
option that ends with water
in the drum, the AUTO
Stand-by function  doesn't
deactivate  the appliance to
remind you to drain the
water.11.  DAILY USE - DRYING ONLYWARNING!
Refer to Safety chapters.11.1  Drying settingWARNING!
Make sure that the water
tap is open.
1. Press On/Off for some seconds to
activate the appliance.
2. Load the laundry one item at a time.
3. Turn the programme dial to the
programme applicable for the items
to dry. The display shows the drying
indicator 
.
To have a good drying
performance  do not exceed
the maximum drying loads
recommended in the user
manual.  Do not set a spin
speed lower than the
automatic speed of the set
programme.www.aeg.com20