AEG Freestanding washer dryer L76680WD User Manual

ENUser ManualWasher DryerL76680WD    

CONTENTS
1. SAFETY INFORMATION.................................................................................................3
2.  SAFETY INSTRUCTIONS................................................................................................ 5
3.  PRODUCT DESCRIPTION.............................................................................................. 7
4.  CONTROL PANEL........................................................................................................... 8
5....

1.  SAFETY INFORMATION
Before the installation and use of the appliance,carefully read the supplied instructions. The manufacturer is not responsible if an incorrect
installation and use causes injuries and damages. Always keep the instructions with the appliance for future
reference.
1.1  Children and vulnerable people safetyWARNING!
Risk of suffocation, injury or permanent
disability.
• This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or...

•Connect the mains plug to the mains socket only at
the end of the installation. Make sure that there isaccess to the mains plug after the installation.
• The ventilation openings in the base (if applicable)
must not be obstructed by a carpet.
• Ensure you have good ventilation in the installation
room to avoid the back flow of gases into the room
from appliances burning other fuels, including open
fires.
• Exhaust air must not be discharged into a flue which is
used for exhausting fumes from appliances...

•Fabric softeners, or similar products, should be used
as specified by the fabric softener instructions.
• Remove all objects from pockets such as lighters and
matches.
• Never stop the wash dryer before the end of the
drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.
• The final part of a wash dryer cycle occurs without
heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will notbe damaged.
• Do not use...

• Do not touch the mains cable or themains plug with wet hands.
• Only for UK and Ireland: The appliance has a 13 amp mains plug. Ifit is necessary to change the fuse inthe mains plug, use a 13 amp ASTA(BS 1362) fuse.
• This appliance complies with the E.E.C. Directives.2.3  Water Connection
• Make sure not to cause damage to
the water hoses.
• Before you connect the appliance to
new pipes or pipes not used for a
long time, let the water flow until it is
clean.
• The first time you use the appliance,...

3. PRODUCT DESCRIPTION3.1  Appliance overview1Worktop2
Detergent dispenser
3
Control panel
4
Door handle
5
Rating plate
6
Drain pump filter
7
Feet for the appliance level
3.2 Installation on suspended
flooring
Suspended wooden floors are
particularly susceptible to vibration.
To help prevent vibration we
recommend you place a waterproof
wood panel, at least 15 mm thick under
the appliance, secured to at least 2 floor
beams with screws, the wood panel must extend beyond the front feet.
If possible install...

4. CONTROL PANEL4.1  Control panel description1
On/Off button 
2
Programme knob
3
Display
4
Start/Pause button 
5
Delay Start button 
6
Time Save button 
7
Drying time button 
8
Drying level button 
9
Spin button 
10
Temperature button 
4.2 Display
A
Temperature area:Temperature indicatorCold water indicator.www.aeg.com8Temp.SpinDrying
LevelDelay
StartStart/PauseDrying
Time Time
SaveOn/Off
Easy Iron Cottons 
+ Prewash
Synthetics + Prewash
Delicates 
20 Min. - 3 kg Wool/Silk
Rinse
Spin/Drain
Wool Dry...

B
Spin area:Spin speed indicatorNo Spin indicator1)Rinse Hold indicator1) Only available for Spin/Drain programme.
C
Dryness level symbols1):Iron dryCupboard dryExtra dryDisplay indicators2):Door locked - You  cannot open the door when this symbol is on.
You  can open the door only when the symbol goes off.Washing phaseDrying phaseChild safety lockExtra rinseDelay start1) 
They come on when you set an automatic drying programme.
2)  The symbols appear on the display when the related phase or function is...

D
Time area:Programme duration (washing and/or drying phase)
When the programme starts, the time decreases with steps of 1 mi-
nute.Delay start
When you press the delay start button, the display shows the delay
start time.Alarm codes
If the appliance has a malfunction, the display shows alarm codes.
Refer to 'Troubleshooting' chapter.Message of error
The display shows this message for some seconds when:
• You cannot set a function with the washing programme.
• You try to change the washing...