AEG B2100-5 Manual
Have a look at the manual AEG B2100-5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 513 AEG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 Usage, Tables and Tips Defrosting Oven function: Defrost (no temperature setting) Unpack the food and place it on a plate on the oven shelf. Do not cover with a plate or bowl, as these can substantially lengthen the de- frosting time. For defrosting, place the shelf on the 1st oven level from the bottom. Defrosting table FoodDefrosting time Min.Further de- frosting time (mins.)Comments Chicken, 1000 g100-14020-30Place the chicken on an upturned saucer placed on a large plate. Halfway through the time, turn it over Meat, 1000 g100-14020-30Halfway through the time, turn it over Meat, 500 g90-12020-30Halfway through the time, turn it over Trout, 150 g25-3510-15--- Strawberries, 300 g30-4010-20--- Butter, 250 g30-4010-15--- Cream, 2 x 200 g80-10010-15Cream that is still slightly frozen in part can still be whipped Flan/gateau, 1400 g6060---
Cleaning and care32 Cleaning and care 1 Warning: First switch off the appliance and let it cool down before carrying out any cleaning. Warning: For safety reasons, do not clean the appliance with steam blasters or high-pressure cleaners. Attention: Do not use any corrosive cleaning fluids, sharp objects or stain removers. Do not clean the glass oven door with abrasive fluids or metal scrapers, which could scratch the surface. The glass could crack and shatter. Outside of the appliance Wipe the front of the appliance with a soft cloth and a solution of hot water and washing up liquid. For metal fronts, use normal commercially available cleaning agents. Please do not use scouring agents and abrasive sponges. Oven interior Clean the appliance after each use. In this way, residues are easier to clean off and are not allowed to burn on. 1.To clean the oven, switch the oven light on. 2.After every use, wipe the oven with a solution of washing-up liquid and allow to dry. 3Remove stubborn residues with a special oven cleaner. 1Warning: If using an oven spray, please follow the manufacturers instructions exactly. Accessories Wash all slide-in units (shelf unit, baking tray, shelf support rails etc.) after each use and dry well. Soak briefly to make them easier to clean.
33 Cleaning and care Shelf Support Rails The shelf support rails on the left and right hand sides of the oven can be re- moved for cleaning the side walls. Removing the shelf support rails First pull the front of the rail away from the oven wall (1) and then unhook at the back (2). Fitting the shelf support rails 3Important! The rounded ends of the guide rails must be pointing forwards! To re-insert, first hook the rail into place at the back (1) and then insert the front and press into place (2).
Cleaning and care34 Oven Lighting 1Warning: Risk of electric shock! Prior to changing the oven light bulb: –Switch off the oven! –Disconnect from the electricity supply. 3Place a cloth on the oven floor to protect the oven light and glass cover. Changing the oven light bulb/cleaning the glass cover 1.Remove the glass cover by turning it anti- clockwise and then clean it. 2.If necessary: replace with 25 watt, 230 V, 300 °C heat-resistant oven lighting. 3.Refit the glass cover.
35 Cleaning and care Oven Roof The upper heating element can be folded down to make it easier to clean the oven roof. Folding down the heating element 1Warning: Only fold down the heating element when the oven is switched off and there is no risk of being burnt! 1.Remove the side shelf support rails. 2.Grip the heating element at the front and pull it forwards and out over the support lug on the inner wall of the oven. 3.The heating element will now fold down. 1Caution: Do not use force to press the heating element down! The heating ele- ment might break. Clean the oven roof Repositioning the heating element 1.Move the heating element back up towards the oven roof. 2.Pull the heating element forwards against the spring pressure and guide it over the oven support lug. 3.Settle it onto the support. 4.Insert shelf support rail. 1Important: The heating element must be positioned correctly and securely on both sides above the support lug on the inner wall of the oven.
Cleaning and care36 Oven door For easier cleaning of the oven interior, the oven door can be taken off its hinges. Removing the oven door from its hinges 1.Open the oven door as far as it will go. 2.Undo the clamping levers (A) on both door hinges fully. 3.Close the oven door as far as the first posi- tion (approx. 45°). 4.Take hold of the oven door with a hand on each side and pull it away from the oven at an upwards angle (Take care: It is heavy). 3Lay the oven door with the outer side fac- ing downwards on something soft and lev- el, for example, a blanket in order to prevent scratches.
37 Cleaning and care Hanging the oven door back on its hinges 1.From the handle side take hold of the oven door with a hand on each side and hold at an angle of approx. 45°. Position the recesses on the bottom of the oven door on the hinges on the oven. Let the door slide down as far as it will go. 2.Open the oven door as far as it will go. 3.Fold up the clamping levers (A) on both door hinges back into their original positions. 4.Close the oven door.
Cleaning and care38 Oven door glass The oven door is fitted with two panels of glass mounted one behind the other. The inner panel can be removed for cleaning. 1Important Rough handling, especially around the edges of the front panel, can cause the glass to break. Removing the door glass 1.Open the oven door as far as it will go. 2.Undo the clamping levers (A) on both door hinges fully. 3.Close the oven door as far as the first posi- tion (approx. 45°). 4.Take hold of the door trim (B) on the upper edge of the door at both sides and press in- wards to release the clip seal. Then remove the door trim by pulling upwards.
39 Cleaning and care 5.Take hold of the door glass on its upper edge and take it out of the guide by pulling it upwards. Cleaning the door glass Clean the door glass thoroughly with a solution of water and washing up liquid. Then dry it carefully. Putting the door glass back 1.From above insert the door glass at an an- gle into the door profile at the bottom edge of the door and lower it. 2.Take hold of the door trim (B) at each side, position it on the inside edge of the door and plug the door trim (B) into the upper edge of the door.
Cleaning and care40 3On the open side of the door trim (B) there is a guide bar (C). This must be pushed be- tween the outer door panel and the guide corner (D). The clip seal (E) must be snapped in. 3.Open the oven door as far as it will go. 4.Fold up the clamping levers (A) on both door hinges back into their original positions. 5.Close the oven door.