Advidia Network Camera A 55 Quick Start Guide

 
 
1 
 
 
 
 
 
 
 
 
A-55  
Quick Start Guide 
Quick Start Guide 
Camera 
 
 
 
 
 
  

 A-55·Quick Start Guide 
 1 
1 Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer.  
About This Document 
This manual applies to the A-55 network camera. 
This manual may contain technical inaccuracies or printing errors, 
and the content is subject to change without notice. The updates will be added to the new version of this manual. We will readily improve or update the products or procedures described in the manual. 
DISCLAIMER...

 A-55·Quick Start Guide 
 2 
2 used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment 
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 
FCC Conditions 
This device complies with part 15 of the FCC Rules. Operation is 
subject to the following two conditions: 
1. This device may not cause harmful interference. 
2. This device...

 A-55·Quick Start Guide 
 3 
3 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal 
waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which 
may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information 
see: www.recyclethis.info 

 A-55·Quick Start Guide 
 4 
4 Safety Instruction 
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.  
The precaution measure is divided into “Warnings” and “Cautions” 
Warnings: Serious injury or death may occur if any of the warnings 
are neglected. 
Cautions: Injury or equipment damage may occur if any of the cautions are neglected. 
 Warnings 
● In the use of the product, you must be in strict compliance with the electrical safety...

 A-55·Quick Start Guide 
 5 
5 ● Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard. 
● Please make sure that the plug is firmly connected to the power 
socket. When the product is mounted on wall or ceiling, the device shall be firmly fixed.  
● If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact 
the service center.  
 Cautions 
● Make sure the power supply voltage is...

 A-55·Quick Start Guide 
 6 
6 model has an “H” in its suffix), dusty or damp locations, and do not expose it to high electromagnetic radiation.  
● To avoid heat accumulation, good ventilation is required for 
operating environment.  
● Keep the camera away from liquid while in use. 
● While in delivery, the camera shall be packed in its original packing, or packing of the same texture. 
● Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly...

 A-55·Quick Start Guide 
 7 
7 Table of Contents 
1 Appearance Description ................................................................. 8 
1.1 Camera Description ......................................................... 8 1.2 Wiring ............................................................................. 9 
2 Installation .................................................................................... 11 
3 Setting the Network Camera over the LAN .................................. 17 
4...

 A-55·Quick Start Guide 
 8 
8 
1 Appearance Description 
1.1 Camera Description 
The overview of the network bullet camera is shown below: 
 
Figure 1-1 Overview 
Table 1-1 Description 
No. Description No. Description 
1 Sun Shield 2 Bracket 1
2
3
654
7  

 A-55·Quick Start Guide 
 9 
9 No. Description No. Description 
3 Junction Box 4 Reset 
5 SD Card Slot 6 Front Box 
7 Analog Video Output   
1.2 Wiring 
  
 
Figure 1-2 Wiring (A) 
Table 1-2 Description (A) 
No. Description 
1 Power supply interface 
2 10M/100M self-adaptive Ethernet interface 
 1
2
-+DC12V