ADT Security Services Simon Version 3 User Manual

9
 
4. After pressing a button on the START MENU the 
system voice will prompt you to then use the MAIN 
MENU.
The MAIN MENU includes the following buttons: 
❑Light Control
❑Option #
❑Sensor/Remote
❑Access Code
Press the appropriate button. Depending on the button you 
pressed, the system will prompt you to continue by press-
ing other buttons on the panel. 
Access Codes
Your security system has a master access code, access 
codes 1-5, and a panic code used for arming and disarming 
the panel. The master...

10
4. The panel voice prompts you to Select from MAIN 
MENU. Press the Light Control button on the 
MAIN MENU.
5. The panel voice responds with House Code is *, press 
again to change or press unit number. This is the 
House Code that was set by your installer. Don’t 
change it. Press the Unit # button.
6. The panel responds with Unit #1 press again to 
change or select from control menu. Keep pressing the 
Unit # button until the correct unit is selected.
7. Press the Time button on the control menu....

11
 
4. Press Option #. Panel announces, Option 1, press 
again for next option or done to select.
5. Press 02. Panel announces, Option 2 press again for 
next option or done to select.
6. Press DONE. Panel announces, Option 2 deleted.
Note
The panel voice is always on for status messages, 
open sensor responses and when in program mode.
Option 03 - Latchkey Time
Adding this option allows you to program Latchkey Time. 
Latchkey is used to notify parents if children do not arrive 
home and disarm the...

12
1. Open panel cover. Panel announces, Use numbered 
keys to enter ID. 
2. Enter Access Code using the numbered keys. Panel 
announces, Please select from Start Menu.
3. Press Delete from the Start menu. Panel announces, 
Select from main menu
4. Press Option #. Panel announces, Option 1, press 
again for next option or done to select.
5. Press 37. Option 37, press again for next option or 
done to delete.
6. Press DONE. Panel announces, Option 37 deleted.
Option 41 - Voice Chime
The panel will...

13
 
1. Open panel cover. Panel announces, Use numbered 
keys to enter ID. 
2. Enter Access Code using the numbered keys. Panel 
announces, Please select from Start Menu.
3. Press Delete from the Start menu. Panel announces, 
Select from main menu
4. Press Option #. Panel announces, Option 1, press 
again for next option or done to select.
5. Press 43. Panel announces, Option 43, press again for 
next option or done to delete.
6. Press DONE. Panel announces, Option 43 deleted.
The panel will call the...

14
System Battery Failure
This condition occurs if the emergency backup battery has 
failed. Status beeps will start and the SYSTEM STATUS 
button will light. Press the SYSTEM STATUS button to 
hear the trouble message. If your AC power is not work-
ing, your security system will shut down once the battery 
has failed. If the condition does not clear after AC power 
has been restored and 24 hours have passed, call your 
security system dealer.
Sensor Failure
This condition occurs if a sensor is not...

15
 
Testing Communication 
Communication between your system, the central monitor-
ing station and your pager should be tested at least once 
per week to make sure you have the proper telephone con-
nection.
To perform a phone test:
1. Open the panel cover.
2. Enter the master access code.
3. Press the Te s t button twice. The panel will announce 
Phone test, press again to change or done to select.
4. Press the DONE button.
The panel will announce Phone test is on twice. If the test 
is successful the...

16
❑If telephone lines are out of service.
Inadequate maintenance is the most common cause of 
alarm failure. Therefore, test your system at least once per 
week to be sure sensors, sirens, and phone communica-
tions are all working correctly.
Although having an alarm system may make you eligible 
for reduced insurance premiums, the system is no substi-
tute for insurance.
WARNING!
Security system devices cannot compensate you for 
the loss of life or property.
Service
If you have any questions about...

17
  

Sensors Motion 
Arm 
How to …Control Panel
Remote Handheld
Touchpad
Key Chain
Touchpad
Remote
Phone
Disarm the
System
Subdisarm the
System
Arm Only - Doors
& Windows
Arm Only –
Motion Sensors
Arm Doors,
Windows &
Motion Sensors
Activate No Entry
Delay
Activate Latchkey
Feature
Activate a Panic
Alarm
Check the System
Status
Set Doors to
Chime
Set Special
Motion to Chime
Turn Time
Activated Lights
On/Off
Turn Sensor
Activated Lights
On/Off
Open Garage
Door or Turn On
Special Lights
Turn Lights On
Turn...