ADT Security Services Simon Version 3 User Manual
Here you can view all the pages of manual ADT Security Services Simon Version 3 User Manual. The ADT Security Services manuals for Home Security are available online for free. You can easily download all the documents as PDF.
Page 1
® Document Number: 466-1871 Rev. B August 2001ITI Part No. 60-875 Contents FCC Notices Introduction to Your Security System ............... 1 Security System Components ........................ 1 How You Communicate to Your System............ 1 Control Panel .................................................. 1 Remote Handheld Touchpad ........................... 2 Keychain Touchpad ........................................ 2 Telephone...
Page 2
FCC Notices FCC Part 15 Information to the User Changes or modifications not expressly approved by Interactive Technologies, Inc. can void the user’s authority to operate the equipment. FCC Part 15 Class A This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment. This equipment...
Page 3
1
X-10 POWERHOUSE1
3
5
9 13
7 11 15A
C
E
I M
G KOUNIT CODEHOUSE CODE
CONTINUOUS
MOMENTARYSOUNDER ONLY
SOUNDER & RELAYRELAY ONLY
ON
OFF
DOOR/WINDOW
SENSOR
LAMP
MODULE
APPLIANCE
MODULE UNIVERSAL
MODULEREMOTE
HANDHELD
TOUCHPAD MOTION
SENSOR
KEYCHAIN
TOUCHPADSMOKE
SENSOR
1
3
5
9 13
71115
A
C
E
I M
G K
O
1
3
5
9 13
71115
A
C
E
I M
G K
O
7 41
89 5
2
6 3OffsPEMERGENCYOn
d & s re s Hol hBtoeKy
DISARM
SYSTEMSTATUSDoors &
WindowsARM
ARM
SensorsMotion
-
CARBON
MONO
XIDED
E
T
E
C
TO
R
CARBON...
Page 4
2 Remote Handheld Touchpad This touchpad gives you the option to enter commands from any room in your house. You can enter commands through simple key presses on the touchpad. Keychain Touchpad Keychain Touchpads are handy for simple arming and dis- arming functions. They are portable and can be carried off- site in a purse or pocket Telephone Touchtone telephones can be used to communicate with your system while you are off-site. Ask your installer if you have this feature. How to Use Your Control...
Page 5
3 2. Press Arm Doors & Windows button. 3. Enter Access Code (if needed). Panel announces any protected doors or windows that are open. Any sensors that are open when the system is armed will be bypassed after exit. Arm Doors & Windows light will be lit and the exit delay will begin. Note Any sensors that are bypassed by the system will NOT be protecting your home. Arming Your System with No Entry Delay Note No Entry Delay can be used in two ways. You can use this feature when you’re staying at...
Page 6
4 HOME CONTROL The Home Control buttons are used to monitor activity within and around the home. They are not used for intru- sion protection. If any of the Home Control buttons are pressed and a sensor or module is not associated (pro- grammed) with this feature the panel will announce, Func- tion not available. Chime Doors Chime Doors is used to signal the panel (chime) when a protected door is opened while the system is disarmed. The panel will chime twice and announce (see Option 41) the door...
Page 7
5 Press FIRE, POLICE, or AUX for 2 seconds (or press twice quickly) to call the central monitoring station and notify them of a non-medical call for help. How Your System Communicates to You Your system responds to you through the use of panel voice messages, status beeps, alarms, panel indicator lights, and to a numeric pager if programmed. Panel Voice Messages When you press the buttons on the panel or the touchpads, the panel responds with voice messages. Panel voice can be enabled or...
Page 8
6 Numeric Pager You may program your security system to send a numeric message indicating system activities to your pager. The system will send the message twice. See “Programming Instructions”. Use the following table to determine what the numeric message is reporting. Canceling and Preventing Accidental Alarms One of the biggest concerns you might have regarding your security system, is causing an accidental alarm. Most accidental alarms occur when leaving the residence after arming the...
Page 9
7 If you are interactive with your panel and the panel hangs up on you, the system is calling in a report to the central monitoring station or a pager, due to an action made by you or someone at the security system site. How to Use Your Touchpads Touchpads are used to control the security system from any location within or near your home. Remote Handheld Touchpad Interfacing with the system using a Remote Handheld Touchpad is similar to using the panel. System Status Press System Status once to...
Page 10
8 Programming Your System The programming decals are visible when you open the panel cover (see Figure 1.). These decals are designed to make system programming easier for you. Always begin by entering your access code. Then, choose an operation from the START MENU. Follow the voice prompts and flow arrows to complete the desired task. Notice the button flow diagrams following the Instruction Summary. Programming Instructions Use the following instructions to access the programming buttons and...