ADT Security Services Safewatch EZ User Manual
Here you can view all the pages of manual ADT Security Services Safewatch EZ User Manual. The ADT Security Services manuals for Home Security are available online for free. You can easily download all the documents as PDF.
Page 1
1 Using your ADT SAFEWATCH EZ Deadbolt-Activated Home Security System © ADT 2002 PATENTED OI269B 2/02
Page 2
2 Congratulations on your purchase of a new Deadbolt-Activated SAFEWATCH EZ Security System. This revolutionary new concept in residential security makes us- ing your system easier than ever before possible, because the system uses its com- puterized control panel to continually monitor the status of your entry door (and deadbolt). It actually anticipates what command it should expect from you next-- simply leaving you just one button to press to effortlessly operate your security sys- tem,...
Page 3
3 TABLE OF CONTENTS TABLE OF CONTENTS INTRODUCTION .............................................................................. 2 TESTING THE SYSTEM .................................................................. 2 EZ TOUCHPAD INDICATORS ......................................................... 4 EZ TOUCHPAD CONTROLS .......................................................... 5 ARMING WHEN LEAVING .............................................................. 6 BYPASSING FAULTED ZONES...
Page 4
4 READY ARMED STAY FIRE TBL • EZ TOUCHPAD INDICATORS The green READY light shows the status of the zones in your system: ON indicates that all zones are secure and the system is ready to be armed. FLASHING indicates that at least one zone is open. To determine the open zone, count the number of flashes and refer to the zone list on your security panel. OFF indicates that the optional second deadbolt is not locked. If there are two deadbolts in the system, the other dead bolt must be...
Page 5
5 EZ TOUCHPAD CONTROLS STAY Button - Press to arm system in the STAY mode. Perimeter devices such as windows and doors will be protected, while interior protective devices such as motion sensors will be de-activated, allowing free movement throughout the premises. AW AY Button - Press to arm system in AWAY mode when no one is to remain home. System will be fully armed with all perimeter and interior devices activated. BYPASS Button - This button has multiple functions, depending on the state...
Page 6
6 ARMING WHEN LEAVING 1 Check the EZ Touchpad indicators. The green READY light should be ON-STEADY, indicating that the system is ready to arm. • If the green READY light is BLINKING, this indicates that a zone is faulted. The READY light is blinking out the zone number of the open zone. Count the flashes and look at your zone list to see which zone is open and secure it (close the door or window, etc.). If you cannot immediately secure the zone, it may be bypassed (see page 7). • If...
Page 7
7 BYPASSING FAULTED ZONES If you are trying to arm with a faulted zone or zones, the green READY light will be blinking out the number of the faulted zones. If you cannot repair the zone(s), they may be temporarily removed from the system, or bypassed, using the fol- lowing procedure: 1 Press the BYPASS button. The EZ Touchpad will beep and the yellow Trouble indicator will light ON STEADY. 2 Press either the STAY or AWAY button. 3 If arming AWAY, open the door and exit....
Page 8
8 ARMING WHEN STAYING HOME Arming in the Stay mode allows you to remain home with the perimeter protection active and the interior protection off, so that you may move freely about the premises. 1 Check the EZ Touchpad indicators. The green READY light should be ON-STEADY, indicating that the system is ready to arm. • If the green READY light is BLINKING, this indicates that a zone is faulted. The READY light is blinking out the zone number of the open zone. Count the flashes and look at...
Page 9
9 ARMING AND LEAVING WITH OTHERS STAYING 1 Check the EZ Touchpad indicators. The green READY light should be ON-STEADY, indicating that the system is ready to arm. •If the green READY light is BLINKING, this indicates that a zone is faulted. The READY light is blinking out the zone number of the open zone. Count the flashes and look at your zone list to see which zone is open and secure it (close the door or window, etc.). If you cannot immediately secure the zone, it may be bypassed (see...
Page 10
10 EXITING WITH THE SYSTEM ALREADY ARMED 1 Press the STAY button. The ARMED indicator will light and STAY will begin to flash, indicating the 60 second exit delay period. 2 Unlock the deadbolt from the inside. System will disarm. 3 Open the door and exit. If the system is Armed STAY and you are leaving with other family members remaining home: 4 Lock the deadbolt from the outside to arm the system. If the deadbolt has not been locked within 60 seconds of pressing...