ADT Security Services PremisePro User Manual

7
Disarming (Turning Off /Unsetting)
Enter your access code to disarm anytime the system is armed (i.e. Armed ( ) indicator is on).  The keypad will
beep if you walk through the entry door.  Enter your code within _____ seconds to avoid an alarm condition
(please check with your installer to have this time programmed).
Disarming Error
If your code is invalid, the system will not disarm and a 2-second error tone will sound. If this happens, press 
and try again. 
Stay Arming (Partially Turning On / Part...

8
When Alarm Sounds
The system can generate 2 different alarm sounds:
Continuous Siren = Intrusion (Burglary Alarm)
Temporal / Pulsed Siren = Fire Alarm
Intrusion (Burglar) Alarm Continuous Siren
 If you are unsure of the source of the alarm approach with caution ! If the alarm was accidental,
enter your Access Code to silence the alarm. Call your central station to avoid a dispatch.
Fire Alarm Pulsed Siren
Follow your emergency evacuation plan immediately! 
If the fire alarm was accidental (i.e. burned...

9
4. To unbypass a zone, enter the two-digit number of the zone(s) to be bypassed (01-64).  You can also use the  
 keys to find the zone, and then press   to select the zone.  The “B” will disappear from the dis-
play to show that the zone is no longer bypassed.
5. To exit bypassing mode and return to the Ready state, press  . 
Bypassing Zones with a PK5501/LCD5501Z keypad
Start with disarming the system
1. Press   , then your [access code] (if required).
2. Enter the two-digit number of the zone(s) to...

10
Trouble Conditions
When a trouble condition is detected, the Trouble ( ) or System indicator will turn on, and the keypad will beep
every 10 seconds. Press the   key to silence the beeps. Press   to view the trouble condition. The Trouble
( ) or System indicator will flash. The corresponding trouble will be represented by numbers 1-8.
 
Trouble Menu Acknowledgement
If the Arming Inhibit for All Troubles features is enabled, Trouble Menu Acknowledgement may be used. To use
this feature while in the...

11
For systems using multiple partitions/areas, access codes can be assigned to specific or multiple partitions/areas.
Please contact your alarm company for details.
The minimum number of variations of access codes (key) is 27027 when 37, 6-digit user codes are used. For SIA
Installations, duplicate or duress codes derived from user codes +/- 1 digit are not allowed. 
The access codes have programmable attributes which allow zone bypassing, remote access using the
ESCORT5580TC or one-time use activation....

12
Bell Squawk Attribute
This attribute is used to determine whether an access code should generate an arming/disarming Bell Squawk
upon entry of the code for Away arming.  The Wireless Keys with access codes associated with them may gener-
ate Arming/Disarming Bell squawks. If desired, this option may be used with codes that are manually entered.
Please contact your installer to have this programmed.
NOTE: The Master Code cannot use the Bell Squawk attribute, but is required to enable it for other...

13
[2]  Auto-arm Control                 
Pressing [2] while in the User Function menu will enable (3 beeps) or disable (one long beep) the Auto-arm fea-
ture, by partition. With this feature enabled, the panel will automatically arm in the Away mode (Stay Away zones
active) at the same time each day.  The auto-arm time is programmed with the [
][6][Master Code][3] command.
[3]  Auto-arm Time                     
The system can be programmed to arm at a programmed time each day, per partition.  
Upon...

14
Changing Brightness/Contrast
PK5500/LCD5500 keypads
When this option is selected, the keypad will allow you to scroll through 10 different brightness/contrast levels.
1. Press  [Master code]. 
2. Use the   keys to scroll to either Brightness Control or Contrast Control.
3. Press   to select the setting you want to adjust.
4. a) ‘Brightness Control’: There are multiple backlighting levels. Use the   keys to scroll to the desired level.
b) ‘Contrast Control’: There are 10 different display contrast...

15
Refer to the following chart:
[1] - A, B, C, 1 [6] - P, Q, R, 6
[2] - D, E, F, 2 [7] - S, T, U, 7
[3] - G, H, I, 3 [8] - V, W, X, 8
[4] - J, K, L, 4 [9] - Y, Z, 9,0
[5] - M, N, O, 5 [0] - Space
7. When the required letter or number is displayed use the arrow keys ( ) to scroll to the next letter.
8. When you are finished programming the Zone Label, press the key, scroll to “Save,” then press  .
9. Continue from Step 2 until all Labels are programmed.
Viewing the Event Buffer from a PK5500/LCD5500...

16
Testing Your System
NOTE: If you are going to perform a System Test, call your Monitoring Station to inform them when you begin and 
also when you end the test.
Testing Your Keypad Sounder and Siren 
The System Test provides several system tests, and a two-second check of the keypad sounder and bell or siren. 
1. Press  [Master Code] .
2. The following will occur: 
- The system activates all keypad sounders and bells or sirens for two seconds.  All keypad lights turn ON.
-  PK5500/LCD5500 keypads will...