ADT Security Services OC835ADT Wireless Outdoor HD Camera Installation Guide

 
 
 
 
 
 
 
 
 
 
ADT Pulse® Interactive Solutions 
O C835- ADT 
Wireless  Outdoor HD Camera  
Quick  Installation Guide  
 
    

 
 
Table of Contents 
CHAPTER 1 INTRODUCTION ............................................................................  3 
Overview  ...............................................................................................................  3 
Physical Details  ...................................................................................................  5 
Package Contents  ...............................................................................................  8 
CHAPTER 2 BASIC...

Chapter 1 
Introduction  
This section provides information about the OC835 -ADT Outdoor Day/Night  HD 
Camera's features, components and capabilities.  
Overview 
The OC835 -ADT is a  true  outdoor  day/night wireless camera with  HD resolution, 
802.11n Wi- Fi connectivity and Wi- Fi Protected Setup (WPS) support. This 
camera is intended for use with ADT Puls e
®. 
Features  
•  Standalone Design.   The  camera  is a standalone syste m with built-in CPU 
and video encoder. It requires only a power...

Chapter 1 Introduction 
 
Wireless Features  
•  Supports 802.11n Wireless Standard.  The 802.11n standard provides 
backward compatibility w ith the 802.11b and g standards . 
•   Supports WPS.  Wi -Fi Protected Setup  (WPS) can simplify the process of 
connecting  the Wireless HD Camera  to the wireless network by using  the push 
button configuration . 
•   Wired and Wireless Network. The O C835-ADT can be connected to the 
Pulse  network wirelessly . It can also be hardwired to the network . 
4...

Chapter 1 Introduction 
 
Physical Details 
 
Front 
 
Figure  1: Front Panel  
Light Sensor This is a hardware sensor to detect lux. 
Lens The lens cannot be adjusted. Please ensure that the lens 
cover remains clean.   
PIR Sensor This is a Passive Infrared sensor to detect motion. 
 
Light Sensor 
Lens 
PIR Sensor 
OC835-ADT  Outdoor  Day/Night  HD Camera Installation Guide 5  
  

Chapter 1 Introduction 
 
Rear 
 
Figure  2: Rear Panel  
DC Power Input Connect the supplied 12V power adapter here. Do not 
use other power adapters; doing so may damage the 
camera. 
Power LED 
(Green, Amber)  
On (Green).  Power on. 
Off.  No power.  
Blinking (Green).   The Power LED blinks during start up 
for approximately 1 minute.   
Blinking (Amber).   The firmware is being upgraded.  
On (Amber).   The firmware upgrade has failed.  
Network/Wireless 
LED 
(Green, Amber) 
On (Green).  Network...

Chapter 1 Introduction 
 
WPS/Reset Button  This button serves two functions on the camera. 
•  WPS Pin Code Mode.   When pressed and held for 
5 seconds during the Pulse enrollment process, the 
camera creates  an encryption-secured wireless 
connection.  
•   Reset.  When pressed and held over 15 seconds, 
the camera reboots and the settings are restored to 
default values.  
Network Port Use a Micro USB to RJ-45 Adapter Cable (not included) 
and a standard Ethernet cable  (not included) to connect...

Chapter 1 Introduction 
 
Package Contents 
The following items are  included in the package . 
 
Figure  3: What’s in the Box 
8  OC835- ADT Outdoor  HD Camera Installation Guide  
  

Chapter 2 
Basic Setup  
This section  provides information on how to assemble  and configure 
the  OC835- ADT Outdoor  HD Camera.  
Installation   
1. Assemble the Camera  
Attach the Camera Stand to the  camera. 
2.  Make the Connection  
Using a Wired Connection  
If you are using a wired connection to the OC835- ADT, connect a Micro USB 
to RJ -45 Adapter  Cable (not included) to the USB port of t he camera. Then use 
a standard Ethernet cable (not included) to connect to the Pulse Gateway or 
Total...

Chapter 2 Basic Setup 
 
3.  Power Up  
Connect the supplied 12V power adapter to the  camera and power up. Use 
only the power adapter provided. Using a  different one may cause hardware 
damage.  
 
CAUTION:  Use only the power adapter provided. Using a different 
one can result in  hardware damage.  
 
The Power LED turns on briefly, and then starts blinking. (The Power LED will 
continue to blink during startup,  which takes about one minute. After startup is 
completed, the Power LED should remain...