Home
>
ADT Security Services
>
Pulse
>
ADT Security Services OC810ADT Wireless Outdoor DayNight Camera Installation Guide
ADT Security Services OC810ADT Wireless Outdoor DayNight Camera Installation Guide
Here you can view all the pages of manual ADT Security Services OC810ADT Wireless Outdoor DayNight Camera Installation Guide. The ADT Security Services manuals for Pulse are available online for free. You can easily download all the documents as PDF.
Page 11
OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide PIR Video Motion Detection The motion event will be captured when a significant image changes within the Window of Interest. The Window of Interest is defined below. The following in stallation hints should be noted: 1. Take care not to install facing direct sunlight, bodies of water, or areas of moving shadows as these can lead to unintended triggers . 2. Avoid aiming the PIR camera near or toward hot objects such as air...
Page 12
OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 7. While choosing the installation area, be aware that the PIR sensor may detect unimportant motions, such as moving trees or shadows caused by excessive wind. NOTE: Video motion detection is susceptible to light reflection, shade or tree/leaves movement, etc. within the Window of Interest. To reduce the number of unwanted video events, please adjust the camera to reduce these noise factors appearing in the Window of Interest...
Page 13
OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide Enabling Motion Detection via the ADT Security System 1. Click the Automation s tab , and then click the Add Automation button. 2. Select a trigger for this automation from the Trigger drop -down list. 3. Select Motion from the Event drop -down list. 4. Select the conditions under which you want the automation action to occur from Active drop -down list. 5. Click Add Actions . 6. From the Delay drop...
Page 14
OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 8. Click OK. 9. Click Save. 12 ADT Pulse® Interactive Solutions
Page 15
OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide Appendix A: Specifications Model OC810-ADT Wireless Outdoor Day/Night Camera Dimensions H x W x D 4.06” x 3.70” x 1.46” (103mm x 94 mm x 37mm ) Operating Temperature 14°F to 113° F (-10 °C to 45° C) Storage Temperature -4°F to 158 °F (-20 °C to 70 °C ) Weather Resistance IP 65 Network Protocols TCP/IP, HTTP, HTTPS, DHCP, SMTP, FTP, UPnP, DDNS, NTP, RTP, RTCP, RTSP, SMB Network Interface 1 Ethernet 10/100BaseT...
Page 16
OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide Appendix B: Regulatory Approvals FCC Statement This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be...