ADT Security Services OC810ADT Wireless Outdoor DayNight Camera Installation Guide

							OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
   
PIR Video Motion Detection  
The motion event will be captured when a significant image changes within the 
Window of Interest. The Window of Interest is defined below.  
 
The following in stallation hints should be noted:  
 
1. Take care not to install facing direct sunlight, bodies of water, or areas of 
moving shadows as these can lead to unintended triggers . 
2.  Avoid aiming the PIR camera near or toward hot objects such as air  
conditioner s. 
3.  It is preferable to install the PIR sensor underneath eaves or porch coverings 
to prevent exposure to rain and ice.  
4. Avoid direct sunlight or headlights from automobiles.  
5. Avoid breeze and corrosive gases.  
6. Make sure that the coverage area of PIR sensor does not extend into 
undesired areas that might cause unwanted activations.  
ADT Pulse® Interactive Solutions 9 
  
						

							OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
 
7. While choosing the installation area, be aware that the PIR sensor may 
detect unimportant motions, such as moving trees or shadows caused  by 
excessive wind.  
 
NOTE:  Video motion detection is susceptible to light reflection, shade 
or tree/leaves movement, etc. within the Window of Interest. To 
reduce the number of unwanted video events, please adjust the 
camera to reduce these noise factors appearing in the Window 
of Interest
.
 
 
   
10  ADT Pulse® Interactive Solutions 
  
						

							OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
  
Enabling Motion Detection via  the ADT Security System    
1. Click the Automation s tab , and  then click the Add  Automation button.  
 
 
2.  Select a trigger for this  automation from the Trigger  drop -down list.  
3. Select  Motion  from the Event  drop -down list.  
4. Select the conditions under which you want the automation action to occur 
from  Active  drop -down list.  
5. Click  Add Actions . 
 
 
6.  From the  Delay drop -down list, select the delay option you want to use for 
this action.  
7. From the  Action drop -down list, select the action you want to take place 
when the trigger occurs.  
ADT Pulse® Interactive Solutions 11 
  
						

							OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
 
8. Click  OK. 
 
 
9.  Click  Save.  
 
 
 
12  ADT Pulse® Interactive Solutions 
  
						

							OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
 
Appendix A:  Specifications  
 
Model OC810-ADT Wireless Outdoor Day/Night Camera  
Dimensions 
H x W x D 
4.06” x 3.70” x 1.46”  
(103mm  x 94 mm  x 37mm ) 
Operating Temperature  14°F to 113° F (-10 °C to 45° C) 
Storage Temperature  -4°F to 158 °F  (-20 °C to 70 °C ) 
Weather Resistance  IP 65 
Network Protocols  TCP/IP, HTTP, HTTPS, DHCP, SMTP, FTP, UPnP, 
DDNS, NTP, RTP, RTCP, RTSP, SMB  
Network Interface 1 Ethernet 10/100BaseT (RJ45) LAN connection  
Wireless interface 
(Wireless Model Only) 
IEEE 802.11n/802.11b/802.11g compatible, 
Infrastructure/Ad-hoc mode, WEP/WPA 
Personal/WPA2 Personal security support, roaming 
support 
LEDs 1 indicator  LED and 8 IR LED s 
Illuminator Night range approximately 25 feet  
Power Adapter Input:100-240 VAC ;  Output: 12V ,1A  
 
   
ADT Pulse® Interactive Solutions 13 
  
						

							OC810-ADT Wireless Outdoor Day/Night Camera Installation Guide 
 
Appendix B:  Regulatory Approvals   
 
FCC Statement  
This equipment generates uses and can radiate radio frequency energy and, if 
not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television  reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one of the following measures:  
•   Reorient or relocate the receiving antenna.  
•   Increase the separation between the equipment a nd receiver. 
•   Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.  
•   Consult the dealer or an experienced radio/TV technician for help.  
To assure continued compliance, any changes or modifications not expressly 
approved by the party responsible for compliance could void the user's authority 
to operate this equipment. (Example -  use only shielded interface cables when 
connecting to computer or peripheral devices).  
FCC Radiation Exposure Statement  
This eq uipment complies with FCC RF radiation exposure limits set forth for an 
uncontrolled environment. This equipment should be installed and operated 
with a minimum distance of 20 centimeters between the radiator and your body.  
This device complies with Part 1 5 of the FCC Rules. Operation is subject to the 
following two conditions:   
(1) This device may not cause harmful interference, and  
(2)  This device must accept any interference received, including interference 
that may cause undesired operation.  
This trans mitter must not be co -located or operating in conjunction with any 
other antenna or transmitter.  
 
 
 
CE Approvals   
The OC810-ADT Wireless Outdoor Day/Night Camera  meet s the guidelines of 
the European Union and comply with the 99/5/EEC and RTTE 99/5EG 
directives, including the following standards:  
•   EN60950- 1 
•   EN300 328  
•   EN301 489  
•   EN55024  
This is a Class B product. In a domestic environment, this product may cause 
radio inter ference in which case the user may be required to take adequate 
measures.  
This product is UL and cUL certified and comply with UL60950 -1 Information 
Technology Equipment applicable requirement.   
 
14