ADT Security Services iCenter 8132 User Manual

							Internet Features (Contd) 
51 
 
User Feedback 
User Feedback 
Name:  
  
Email Address:   
  
Type of Feedback  Suggestion 
  
Category  iCenter/iCenter-i W eb Interface – Custom 
Content 
 
 Other:  
  
Comment: 
(250 characters max.)  
 
 
 
 
 
Logout
LogoutLogout Logout 
    
The LOGOUT
LOGOUTLOGOUT LOGOUT button allows you to leave the iCenter.alarmnet.com Internet site.  
Pressing the LOGOUT button displays the following:  
You have been logged out.   
Click Here to Close Your Browser 
  
						

							Internet Features (contd) 
52 
 
  
 
  
						

							 
53 
 
                                                 Advanced System Features 
 
Introduction to Advanced System Features 
While most of the commonly used security functions are available from 
ICenter/iCenter-i’s advanced user interface, there are some less used, advanced 
features that can either be accessed through Touchpad Emulation mode on the 
iCenter/iCenter-i or a standard Custom English Touchpad.  To program your 
system’s advanced features, refer to you Control Panel User Guide. 
Touchpad (Console) Emulation Mode 
Console Mode allows you to use an iCenter/iCenter-i interface just as you would a 
regular system Touchpad.  In this mode, you can use either iCenter/iCenter-i’s touch 
screen Touchpad,” or the Touchpad keys (if available on your model).  All 
commands shown in Console Emulation mode can also be executed from a standard 
Custom English Touchpad. 
How to Enter Console Emulation Mode 
To access the touch screen Touchpad, do the following: 
SCREEN ACTION 
 1.  From the Home screen, press the 
SECURITY button.  The Arming screen is 
displayed. 
 
 2.  Press the MORE CHOICES button.  The 
More Choices screen is displayed. 
  
						

							Trouble Conditions (Contd) 
54 
 SCREEN ACTION 
 
 3.  Press the CONSOLE MODE button on the 
More Choices screen.  The Touchpad 
screen is displayed. 
  
						

							 
55 
 
Summary of Audio Notification 
 
SOUND CAUSE  DISPLAY 
Loud, Interrupted* 
Touchpad & 
External Fire Alarm  FIRE is displayed; descriptor of zone in 
alarm is displayed. 
Loud, Continuous* 
Touchpad & 
External Burglary/Audible Emergency 
Alarm  ALARM is displayed; descriptor of zone in 
alarm is also displayed. 
One Short Beep 
(not repeated) 
Touchpad only a.  System disarm   
b.  System arming attempt 
with an open zone. 
c.  Bypass verify  a.  DISARMED/READY TO ARM is 
displayed.  
b.  The number and descriptor of the open 
protection zone are displayed. 
c.  Numbers and descriptors of the 
bypassed protection zones are displayed 
(One beep is heard for each zone 
displayed). Subsequently, the following is 
displayed: DISARMED BYPASS Ready to 
Arm 
One Short Beep 
(once every 15 
sec.) Touchpad 
only System is in test mode  Opened Zone identifications will appear. 
One Beep 
(every 60 sec.)  
Touchpad only Low battery at a transmitter  LO BAT displayed with description of 
transmitter. 
Two Short Beeps  
Touchpad only  Arm Away or Maximum  ARMED AW AY or ARMED MAXIMUM is 
displayed. Red ARMED indicator is lit. 
Three Short Beeps 
Touchpad only a.  Arm Stay or Instant   
b.  Zone opened while system 
is in Chime Mode.   
c.  Entry warning** a.  ARMED STAY ZONE BYPASSED or 
ARMED INSTANT ZONE BYPASSED is 
displayed. Red ARMED indicator is lit. 
b.  CHIME displayed, descriptor of open 
protection zone will be displayed if the [✱] 
key is pressed. 
c.  DISARM SYSTEM OR ALARM W ILL 
OCCUR is displayed. 
Rapid Beeping  
Touchpad only a.  Trouble   
b.  AC power loss alert*** 
c.  Memory of alarm  a.  CHECK displayed.  Descriptor of 
troubled protection zone is displayed. 
b.  AC LOSS displayed (may alternate 
with other displays that may be present). 
c.  FIRE or ALARM is displayed; 
descriptor of zone in alarm is displayed.  
Slow Beeping  
Touchpad only a.  Entry delay warning**  
b.  Exit delay warning (if 
programmed) a.  DISARM SYSTEM OR ALARM W ILL 
OCCUR is displayed. Exceeding the delay 
time without disarming causes alarm.  
b.  ARMED AW AY or ARMED MAXIMUM 
is displayed along with You May Exit Now 
*  If bell is used as external sounder, fire alarm is pulsed ring; burglary/audible 
emergency is steady ring.   
						

							Summary of Audio Notification (Contd) 
56 
 
**  Entry warning may consist of three short beeps or slow continuous beeping, as 
programmed by your installer. 
***  Loss of system battery power is not indicated or annunciated by the Touchpad 
(warnings are for loss of AC power only). 
  
						

							 
57 
 
Summary of iCenter/iCenter-i LED Operation 
iCenter/iCenter-i LED Operation 
iCenter/iCenter-i has four LEDs labeled - WEB, ARMED, READY and MESSAGE. 
WEB and MESSAGE LEDs are yellow. ARMED LED is red and READY LED is 
green. Each LEDs on and off state has different meanings during different 
operations.  
Following states use LEDs to represent different sub-states. 
• Normal (Idle) State 
• Software Download State 
• Software Download State - Failure Modes 
Each LED can have four different states - ON, OFF, FAST BLINK and SLOW 
BLINK. All LEDs do not use all of the above states. Details are provided below. 
LEDs During Normal (Idle) State
LEDs During Normal (Idle) StateLEDs During Normal (Idle) State LEDs During Normal (Idle) State 
    
LED DESCRIPTION 
W EB ON – Connected to internet 
OFF – not connected 
FAST BLINK -  either sending or receiving data 
SLOW  BLINK – connecting to server (BB) or dialing to RAS server (DU) 
ARMED ON – Security system is armed 
OFF – Security system is not armed 
READY ON – Security system is disarmed and ready to arm 
OFF – Security system is disarmed but not ready. Faults/troubles present 
LEDs Du
LEDs DuLEDs Du LEDs During Software Downloading
ring Software Downloadingring Software Downloading ring Software Downloading 
    
LED DESCRIPTION 
W EB ON – obtained IP address (via either DHCP client or static IP assignment) (BB) 
or established link to RAS server (DU) 
OFF – not connected  
SLOW  BLINK – connecting to server (BB) or dialing (DU) 
ARMED ON – connected to server 
OFF –  
FAST BLINK – could not connect to server (no route or authentication failure) 
SLOW  BLINK – connecting to server 
READY ON – successfully downloaded configuration data 
FAST BLINK – could not download configuration data or if with ARMED FAST 
BLINK then it connected to server but failed authentication 
OFF –  
MESSAGE ON – erasing application code 
SLOW  BLINK – downloading application code 
VERY SLOW  BLINK – verifying CRC after successful code download  
						

							Summary of iCenter/iCenter-i LED Operation (Contd) 
58 
 
LED Operation When Software Download
LED Operation When Software DownloadLED Operation When Software Download LED Operation When Software Download Fails
 Fails Fails  Fails 
    
There are the following sequences providing the extra failure information: 
1.  CRC failure 1 (calculated CRC does not match CRC provided with binary) 
• WEB, ARMED, READY and MESSAGE – all FAST BLINK for 3 seconds, 
following 
• WEB, ARMED, READY and MESSAGE ON for 3 seconds and following  
• WEB, ARMED, READY and MESSAGE FAST BLINK for 3 seconds. 
2.  CRC failure 2 (calculated network CRC does not match CRC provided with 
binary) 
• WEB, ARMED, READY and MESSAGE – all FAST BLINK for 3 seconds, 
following 
• WEB, ARMED, READY and MESSAGE SLOW BLINK for 3 seconds and 
following  
• WEB, ARMED, READY and MESSAGE FAST BLINK for 3 seconds. 
 
 
 
 
 
  
						

							 
59 
 
iCenter/iCenter-i Setup 
 
How to Access iCenter/iCenter-i Setup Options 
Setup allows you to adjust the touch screen contrast and/or adjust the 
iCenter/iCenter-i speaker volume.  You may also select the time interval that must 
pass prior to iCenter/iCenter-i going into screen saver mode (screen goes blank). 
Additionally, you may enter the Use
UseUse User Setup
r Setupr Setup r Setup screen, Advanced Setup
Advanced SetupAdvanced Setup Advanced Setup screen, or 
Clean Screen
Clean ScreenClean Screen Clean Screen (maintenance mode) from the Setup screen by pressing the 
corresponding button. 
How to Access Setup 
Access the Setup features as follows: 
SCREEN ACTION 
 1.  From the Home screen, press the 
SECURITY button.  The Arming screen is 
displayed. 
 
 2.  Press the MORE CHOICES button.  The 
More Choices screen is displayed. 
 
 3.  Press the SETUP button on the More 
Choices screen.  The Setup screen is 
displayed. 
  
						

							iCenter/iCenter-i Setup (contd) 
60 
 SCREEN ACTION 
 
How to Adjust the Touch Screen Contrast 
You may adjust the touch screen contrast as follows: 
If… Then… 
you want to increase contrast  press the slide bar above the current contrast 
setting. 
you want to decrease contrast  press the slide bar below the current contrast 
setting. 
if another adjustment or selection is to be 
made go to the corresponding paragraph in this 
section. 
If no additional adjustment or selection is to be 
made press the Back icon at the upper-right-hand 
corner of the Setup screen to return to the 
previous screen, or 
press the Home icon in the upper left-hand 
corner of the Setup screen to return to your 
Home screen. 
 
AUI-011-V0
CONTRAST
SLIDEBAR
INDICATOR
 
 
Touch Scre e n Contrast Control
Touch Scre e n Contrast ControlTouch Scre e n Contrast Control Touch Scre e n Contrast Control