ADT Security Services iCamera1000ADT Indoor LowLight Camera Installation Guide

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ADT Pulse®  Interactive Solutions  
iCamera -1000- ADT 
Indoor Low -Light Camera  
Installation Guide  
 
    

iCamera-1000-ADT Indoor Low-Light Camera Installation Guide 
 
Table of Contents 
INTRODUCTION  ...........................................................................................................  1 
Overview .......................................................................................................................  1 
iCamera-1000 -ADT Features  ............................................................................  1 
Package Contents...

iCamera-1000-ADT Indoor Low-Light Camera Installation Guide 
 
Introduction 
This installation guide provides step-by -step instructions for configuring and 
installing your iCamera- 1000-ADT Indoor Low -Light camera to your ADT Puls e® 
w ireless network.  Permanent mounting instructions for  the iCamera are also 
included.  
 
Overview   
The iCamera -1000- ADT (hereafter referred to as  the iCamera ) monitors your 
home or business in a low light or dark environment.  The  iCamera  can be used 
as...

iCamera-1000-ADT Indoor Low-Light Camera Installation Guide 
  
Package Contents  
1. The iCamera -1000- ADT Indoor Low -Light Camera 
2. Stand   
3. Y-Cable   
4. Power  over Ethernet  (PoE ) Cable 
5.  12V Power Adapter  
6. Assembly Back Plate with three screws (packaged separately)  
7. Wall Mount Plate   
8. Two Mounting Screws   
9. Installation Guide 
 
 
 
2  ADT Pulse® Interactive Solutions 
  

iCamera-1000-ADT Indoor Low-Light Camera Installation Guide 
  
Physical Details – iCamera -1000- ADT  
  
Front Panel     
 
Figure 1: Front Panel 
1. Light Sensor Detects lighting conditions  
2. IR LEDs  The LEDs help you see clearly at night or in a dark 
environment.   
3. Day Camera Lens The Day Camera Lens is used in a bright environment.  
4. Night Camera 
Lens  
The Night Camera Lens is used in a dark environment.  
5. Power/Wi-Fi 
(green)  
On - Power on  
Off -  Power off   
B linking  -  Data...

iCamera-1000-ADT Indoor Low-Light Camera Installation Guide 
  
Rear Panel    
 
Figure 2: Rear Panel 
 
1. LAN Port Use in conjunction with the supplied LAN cable to 
connect your iCamera  to the ADT Pulse  Gateway.   
2. Stand Mount  The stand mount connects the stand to the iCamera.  
3. Reset Button The reset button has two (2) functions: 
•  Reboot.   When the reset button is quickly pressed 
then released, the iCamera  reboots. 
•   Clear All Data.   To Clear All Data and restore the 
factory...

iCamera-1000-ADT Indoor Low-Light Camera Installation Guide 
 
Installation 
This section  provides details of installing and configuring the  iCamera -1000-
ADT Indoor Low -Light camera . 
 
Configuring and Installing the iCamera -1000- ADT   
The following instructions provide details of config uring and installing the 
iCamera- 1000-ADT Indoor Low -Light Camera to your ADT Puls e network.  
Initial setup is done only one time to configure the iCamera’s wireless settings to 
the ADT Puls e Gateway....

iCamera-1000-ADT Indoor Low-Light Camera Installation Guide 
  
Adding the iCamera-1000- ADT to your ADT Pulse  
Wireless Network  
1. Open your web browser. In the address bar, type:  
https://Portal.ADTPulse.com. 
2.  Type your Username  and  Password, and  then click the Sign In  button.  
 
3. Click the System  tab , and  then click the Manage Devices  button. 
 
6  ADT Pulse® Interactive Solutions 
  

iCamera-1000-ADT Indoor Low-Light Camera Installation Guide 
 
4. In the Manage Devices Assistant , click Cameras. 
 
 
5.  Click the picture of the iCamera  or select it from the drop- down list, and then 
click the Continue  button.   
 
 
6.  Assign the iCamera  a unique name (this is usually based on the location of 
the  iCamera ) in the space provided, and  then type the iCamera’s  MAC ID  or 
Server Name . 
ADT Pulse® Interactive Solutions 7 
  

iCamera-1000-ADT Indoor Low-Light Camera Installation Guide 
 
7. Click the Continue  button.  
 
 
8.  Connect the camera to the Device Port of the gateway using the Ethernet 
cable  (attached to the Y -Cable.) 
9. Connect the supplied 12V power adapter to power up the iCamera,  and 
then click the Continue  button.  
 
 
8  ADT Pulse® Interactive Solutions