ADT Security Services Ademco 4110 Manual

–11–
(continued)
SECURITY CODES
To Assign, Change,
or Delete
User Codes4-DIGIT USER CODESIt is recommended thatobvious codes such as1111 or 1234 not beassigned.
1. Enter your Master code and press the CODE key.
2. Enter single-digit user number (2, 3, 4, 5, 6 or 7) for which a code
is to be assigned, changed, or deleted.
3.
If assigning or changing a users code,
 enter the desired 4-digit code
for use by that user number. The keypad will beep once.
If deleting a users code,
 perform steps 1 & 2 and stop....

–12–
ENTRY/EXIT DELAYS
General Information
Your system has preset time delays, known as exit delay and entry delay.
When you arm your system, exit delay gives you time to leave through
the entry/exit door without setting off an alarm. Entry delay gives you time
to disarm the system when you reenter through the entry/exit door. The
system must be disarmed, however, before the entry delay period ends, or
an alarm will occur. The keypad will beep slowly during the entry delay
period, reminding you to disarm...

–13–
CHECKING FOR OPEN ZONES
Using the
T
READY KeyBefore your system can be armed, all protected doors, windows and other
protection zones must be closed or bypassed (see 
BYPASSING
PROTECTION
 ZONES
 section), otherwise the keypad will display a Not
Ready message, and if your keypad has a READY indicator light, it will
not be lit. The READY key can be used to display all faulted zones,
making it easier for you to secure any open zone.
To display faulted zones, simply press and release the READY key (do...

–14–
BYPASSING PROTECTION ZONES
Using the
6
BYPASS KeyLIMITATION
The system will notallow fire zones to bebypassed.
All bypasses are removedwhen an OFF sequence(security code plus OFF)is performed.
This key is used when you want to arm your system with one or more
zones intentionally unprotected. The system must be disarmed first.
1.  Enter your security code and press the BYPASS key.
2.  Enter zone number(s) for the zone(s) to be bypassed (e.g., 06, 10,
13, etc.). 
Single digit zone numbers must be...

–15–
(continued)
BYPASSING PROTECTION ZONES
Quick BypassAsk your installer ifQuick Bypass isactive for yoursystem, and if so,check here:       
If your system supports Quick Bypass, it allows you to easily bypass
all open (faulted) zones without having to enter zone numbers individually.
To use this feature, enter your security code, press the BYPASS key,
then stop. In a few moments, all open zones will be displayed along with a
Bypass message. Wait for all bypassed zones to be displayed, then
arm the...

–16–
ARMING PERIMETER ONLY
WITH ENTRY DELAY ON
Using the
3
STAY Key
BEFORE ARMING
close all doors and windows(see 
CHECKING
 FOR OPEN
ZONES
 on page 13).
Use this key when you are staying inside, but expect someone to
use an entry/exit door later.
1. Enter your security code and press the STAY key.
2. The keypad will beep three times and will display the armed message.
The red ARMED indicator will light.
3. The system will arm. An alarm will sound immediately if a protected
perimeter window or...

–17–
ARMING PERIMETER ONLY
WITH ENTRY DELAY OFF
Using the
7
INSTANT Key
BEFORE ARMING
close all doors and windows(see 
CHECKING
 FOR OPEN
ZONES
 on page 13).
Use this key when you are staying inside and do not expect
anyone to use an entry/exit door.
1. Enter your security code and press the INSTANT key.
2. The keypad will beep three times and will display the armed message.
The red ARMED indicator will light.
3. The system will arm. An alarm will sound immediately if any protected
perimeter door or...

–18–
ARMING ALL PROTECTION
WITH ENTRY DELAY ON
Using the
2
AWAY Key
BEFORE ARMING
close all doors and windows(see 
CHECKING
 FOR OPEN
ZONES
 on page 13).
Use this key when no one will be staying inside.
1. Enter your security code and press the AWAY key.
2. The keypad will beep twice and will display the armed message. The
red ARMED indicator will light.
3. You may leave through an entry/exit door during the exit delay period
without causing an alarm.
After exit delay, the system arms and will sound an...

–19–
ARMING ALL PROTECTION
WITH ENTRY DELAY OFF
Using the
4
MAXIMUM Key
BEFORE ARMING
close all doors and windows(see 
CHECKING
 FOR OPEN
ZONES
 on page 13).
Use this key when the premises will be vacant for extended
periods of time such as vacations, etc., or when no one will be moving
through protected interior areas.
1. Enter your security code and press the MAXIMUM key.
2. The keypad will beep twice and will display the armed message. The
red ARMED indicator will light.
3. You may leave through an...

–20–
DISARMING THE SYSTEM AND SILENCING ALARMS
Using the
1OFF Key
IMPORTANT:
If you return and themain burglary sounder
is on:
DO NOT ENTER, butCONTACT THE POLICEfrom a nearby safe location.If you return after analarm has occurred and
the main sounderhas shut itself off:the keypad will beep rapidlyupon your entering, indicatingthat an alarm has occurred
during your absence
(the Memory of Alarm feature).LEAVE IMMEDIATELY, andCONTACT THE POLICEfrom a nearby safe location.WHEN SAFE TO DO SO,
re-enter
and...