Home > Addonics Technologies > Multi-Bay Enclosure > Addonics Technologies Storage Tower ST3RPM user guide

Addonics Technologies Storage Tower ST3RPM user guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Addonics Technologies Storage Tower ST3RPM user guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 2
    Add page 1 to Favourites
    image text
    Enable zoom 
    							Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v6.1.11
T E C H N O L O G I E S
www.addonics.com
User Guide
Storage Tower  III(ST3RPM)
    Add page 2 to Favourites
    image text
    Enable zoom 
    							Removing cover of Storage Tower III
Loosen the 3 screws at the back of the tower using a Philips screwdriver by turning 
counter-clockwise. Separate the metal casing of the tower from the housi\
ng by lifting 
up the casing.
Installing drive into the Storage Tower III with AD5SARPM-E 
Secure up to three 3.5” SATA hard disk drive into the bay using optional mounting 
brackets. 
Note: It is recommended to fill up the tower III with SATA drives from top to bottom. 
This is to help in identifying which drives connect to which ports for e\
asier 
troubleshooting.
Connecting the power cable and tower III to the computer
a.  Connect the power cord provided from the wall outlet to the back of the \
 
 Tower.
b.  Make sure the power is off (power LED light should be off).
c.  Connect either the provided USB or eSATA cable from the back of the Tower  
  to the computer. We recommend connecting the eSATA port for best   
  performance if this port is available on your computer.
Power on/off control
Turn on the power to the Tower by pressing the power button on the front. The power 
LED light should lit indicating the power is on.
Cable Connections
•  5 internal SATA data cable
•  4-pin floppy power connector  
  for port multiplier power
•  Power LED
•  Four hard drive activity LED
Note:  When the port multiplier (PM) 
is connected to a SATA Host controller 
with  SiI3124  or  SiI3132  chip,  in  the 
RAID BIOS of the host controller, you 
will only see one drive and that is the 
drive connected to port 1 on the port 
multiplier.
All the SATA drives connected to the 
PM will show in the SATARAID5 Array 
Manager.
1.  Attach the SATA hard drives (up to 5) to ports 1-5 on the Port Multiplier using  
  SATA cables. 
2.  Connect an eSATA cable to the Host eSATA port of the Port Multiplier then to  
  the eSATA port of the raid controller.
Host LED
HD Access LED
Power LED PM Status LED
    All Addonics Technologies manuals Comments (0)

    Related Manuals for Addonics Technologies Storage Tower ST3RPM user guide