Addonics Technologies Saturn Cipher 35 IDE saturn cipher ed User Manual

Addonics Technologies Saturn Cipher ExDrive Use r Guide 
 
10
Chapter 6 Attaching USIB int erface cable  
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
 
Be sure the Saturn cipher key is inserted into the dr ive enclosure prior to 
turning on th e power or attachi ng the USIB  interface cable to the co mputer. 
Hard drive will not be detected if the interface cable is attached to the 
computer without the Cipher key inserted first.  Under such condition, the 
power to the drive enclosure will have to be turned off...

Addonics Technologies Saturn Cipher ExDrive Use r Guide 
 
11
Chapter 7    USIB interface cable installation 
 
USB 2.0 USIB  interface cable  
  
Ø Since USB 2.0 Hi-Speed is an evolution of the existing  USB 1.1 
specification, it is fully forward and backward compatible with 
current USB sys tems.  
 
Ø If you do not have an USB2.0 port, you may install an  optional 
USB2.0 adapter or controller  
             
USB driver installation 
For Win98 and Win98SE  
 
1. Make sure your computer is up and...

Addonics Technologies Saturn Cipher ExDrive Use r Guide 
 
12
Serial ATA USIB interface cable  
 
 
     
 
 
Serial ATA Saturn Cipher ExDrive Installation 
 For Win98SE, Me, 2000 and XP 
 
 
Note: There no drivers needed to use the Serial ATA cable as long as the 
drivers are installed for the Serial ATA Controller card/chip. It is plug and 
play. 
 
1. Make sure the Seria l ATA cable is securely attach to the back of  the 
drive. (For Addonics Pocket drives such as Pocket CDROM, Exdrive etc. 
you may...

Addonics Technologies Saturn Cipher ExDrive Use r Guide 
 
13
Firewire USIB interface cable  
  
    

Addonics Technologies Saturn Cipher ExDrive Use r Guide 
 
14
CardBus / PCMCIA setting 
 
The Addonics CardBus PCMCIA card has an option switch can all ow 
you to choose using either PCMCIA m ode or CardBus mode. The switch 
position is as follows: 
       
        
  
 
 
 
 
 
 
 
 
Side View 
 
 
 
 
 
CardBus mode supports WIN 95/98/ME/2000 and XP only.  
For DOS, WIN 3.1x and WIN NT, the switch must be set in 
PCMCIA mode. 
       
Note: Brand New Har d drive must be Partitioned and Fo rmatted first...

Addonics Technologies Saturn Cipher ExDrive Use r Guide 
 
15
5. Insert the driver diskette in “A” drive and follo w the instruction on the 
screen to load “Addonics CardBus IDE Controller”. Follow wizard 
and point  to the location of the driver. (Follow the steps f rom the 
Driver Disc to where you saved the driver files) 
6. When installation is finished, a PCMCIA card ico n will appear in the 
lower right-hand of the Window’s sy stem tray. 
7. Double Click on the “My Computer” icon. You ar e now...

Addonics Technologies Saturn Cipher ExDrive Use r Guide 
 
16
 
 
CardBus/PCMCIA Driver installation 
(Windows XP PCMCIA Installation Guide) 
1. Make sure that all  cables are properly c onnected and the drive has 
power. 
2. If you are using the Saturn Ci pher ExDrives, make sure that th e 
power brick has a steady green light. 
3. Boot y our computer  to Windows.  
4. Plug in the Cardbus/PCMCIA cable to  the Computers PCMCIA 
Socket/Port then insert th e card to the Computer. 
5. Windows should now...

Addonics Technologies Saturn Cipher ExDrive Use r Guide 
 
17
Technical Support 
 
If you need assistan ce to get your unit functionin g properly, please call 
Addonics Technical Support .  Our technical staff will be happy to  assist you, 
but they will need your help to do so.  Calling th e technical support staff 
without all the proper information can be both time consuming and 
frustrating.  Here are some tips to help yo u out: 
 
(1) MODEL NUMBER – Please have this number on hand. 
(2) SYSTEM...