Addonics Technologies RAID Tower V SN535E1G User Manual

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Finally, review and confirm the settings:
After clicking on the Update settings button, Initial Setup is complete.\
Sharing Files Using the Secure NAS
SMB (Windows Sharing)
Connecting to the NAS for direct file access through Windows Explorer is\
 very similar 
to sharing files between Windows systems. Typing “\\ADDNAS” (or the Secure NAS 
units hostname if changed from the default)...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
On Mac systems, on the Finders Go menu choose “Connect to Server...” then in 
the server address box type “smb://” followed by the Secure NAS un\
its IP 
address. On Linux systems, use the “Connect to share...” dialog fo\
und on the 
Nautilus or “File Manager” menu bar, then select Windows Share for the type and 
complete the remaining fields for share name, username and password....

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
When first setting up, a prompt appears warning there is no password for\
 the 
admin account. Click the space between the “DL” and “Input” \
buttons, then type 
the command “useradd admin” as shown, then add a password after a \
space.
NOTE: The MLDonkey admin account is not the same account as the Secure NAS uni\
ts web interface 
admin account. It is recommended that the password...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Change Current Date and Time
Settings for time zone, date and time. Set time zone to a listed city ne\
arby in the
same time zone.
Update Device/Workgroup Names
Settings for the Secure NAS units network name and Windows workgroup. 
Default setting is ADDNAS joined to WORKGROUP. Setting the workgroup name 
on all devices on the same network to match is strongly recommended. The...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Choosing Automatic will configure the Secure NAS unit as a DHCP client and the
configuration wizard will skip to the end. Choosing Manual configuration\
 will 
proceed to Step 2.
Step 2 configures the Secure NAS units static IP address and subnet mask. To 
choose a working static IP address, make sure you meet these criteria:
1. The subnet mask must match the rest of the network...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
The next step is to configure network connections. The gateway is usually the 
internal IP address for the router the Secure NAS unit is connected to. DNS 
entries are usually the same as used by the routers external network co\
nfiguration 
(determined by your ISP). Setting an NTP server will synchronize the Secure NAS 
unit to a time server, usually on the Internet. This can be a...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
View Drive Information
Displays details of all connected drives. If network shares are configur\
ed for
drives that have been disconnected, those drives will also appear in thi\
s list as
unavailable.
Device: The letter after “sd” is the drives letter, in order of when the drive was first
encountered by the NAS unit. The number at the end of the device label is the
partition on the...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
After clicking “Yes, Im sure,” the format utility will create and prepare one partiti\
on 
on the selected drive, using all space on the disk. A page will load next confirming 
the format is in progress. This page updates once every minute. Once formatting 
is complete, the page will change to state it is done. Click any of the \
tabs above 
the message to perform other tasks. If...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
The Sharing Tab
User Management
Shows current list of known users on the Secure NAS unit. 
To delete a user, click the “Delete” link next to that username, then confirm.
To change a users password, select the username just above “New Passw\
ord,” then
enter the new password into the “New Password” and “Confirm Pas\
sword” fields and
click “Change Password.”
To create a new user...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Step 1 is to define the name of the share. The share name will become the folder
name on the drive.
NOTE: The shared folder name will be written to disk using all capital letters\
. If an existing folder of the same 
name appears and is not all capital letters, the Secure NAS considers th\
at not a match and writes the same 
folder name in all capital letters anyway. This can cause...