Addonics Technologies Jupiter Cipher 1825 IDE jupiter cipher mr User Manual

 
 
 
 
 
 
 
Addonics 
TE C HNO LO G IE S 
 
 
 
Jupiter Cipher Mobile Rack 
 
For the following models: JCMRI64, JCMRI128 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
User’s Guide 
Version 1.0  

Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 1
FCC Warning Statement 
 
This equipment  has been tested and found to comply  with the limits for a class 
B digital device pursuant to Part 15 of the FCC rules.  These limits are 
designed to provide  reasonable protection against har mful interference in a 
residential installation.  This equipment generates, use s and can radiate radio 
frequency energy.  If  not installed and used in accordance with the instructions, 
it may cause...

Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 2
Contents 
 
FCC Warning...................................................................................1 
Limited Warranty............................................................................1 
Contents............................................................................................2 
Chapter 1 General Information.........................................................3...

Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 3
Chapter 1 
  
General Information 
 
The Addonics Technologies Jupiter Ciph er Mobile Rack is a portable 2.5” Hard 
Disk Drive kit. It consists of the Jupiter Cipher ExDrive enclosure and an IDE 
cradle. 
 
Features 
 
· Stylished and rugged black anodized aluminum housing  
· Compact size and light weight  
· Shock proof - up to 3 feet drop damage protection for the hard dri ve  
· Easy hard drive installation  
· Choice of standard...

Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 4
Chapter 2  Jupiter Cipher Mobi le Rack key 
 
Check to make sure you have the correct version of Jupiter Cipher Mobile Rack 
key. The key  should match  the label at the bottom of the drive enclosure 
 
 
 
 
 
 
 
 
 
 
IMPORTANT  
 
There is no back door for the Jupiter Cipher Mobile Rack encrypted hard 
drive if the key is lost or stolen.  
 
To ensure there is a spar e key, your Jupiter Ciph er Mobile Rack bundled kit 
comes with...

Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 5
Chapter 3 Keeping track of the hard drive  
 
If you are usin g the Jupiter Ciph er Mobile Rack to encrypt multiple hard 
drives, it is importa nt to label your hard dri ve if you are taking t he drive out of 
the enclosure.  The hard dri ve with Jupiter Ciph er Mobile Rack encryption will 
look like a brand new drive when attach dir ectly to the IDE or SATA controller 
of a computer. Th ere will be no  partition or any hint to...

Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 6
Chapter 4  Jumper Settings Inside the Jupiter Cipher 
Mobile Rack 
 
Configuration: 
Jupiter Cipher ExDrive enclosure is placed inside IDE cradle. IDE cradle 
is connected to the IDE Controller on the mainboard with an IDE cable. 
 
Note: We recommend setting the hard dr ive to MASTER mode/setting at all 
times. (Default setting) 
                          J4 Pin Definition for Master Setting 
 
 
 
  J1 Pin Definition for Mobile Rack...

Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 7
Chapter 5  
Hardware Installation Guide 
 
Exploded View of  Enclosure shown with various components 
  

Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 8
Step 2 
Align the male IDE connector on the 
2.5” hard drive with the female IDE 
connector on the PCB. Pus h the hard 
drive till the connector pins on the hard 
drive is fully seated inside the 
connector on the PCB.  
 
 
 
 
Step 3 
Wrap the shock absorbe r around the 
hard drive and PCB. 
 
 
 
 
 
 
 
Step 4 
Turn  over the PCB and sec ure the 
hard drive to the PCB w ith the 
mounting screws that come with the 
kit....

Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 9
Step 6 
Put the top cove r on by holding it in n ear 
vertical position and sliding th e two 
metal clips inside the two small slots on 
the rear of the bottom cove r. 
 
 
 
 
 
 
 
Step 7 
Lower the front of the top cover and 
makin g sure the two cov ers lined up 
properly. Tighten the small retaining 
screw on the front of the bottom cover 
to close the enclosure.