Addonics Technologies Jupiter Cipher 1825 IDE jupiter cipher mr User Manual

							 
 
 
 
 
 
 
Addonics 
TE C HNO LO G IE S 
 
 
 
Jupiter Cipher Mobile Rack 
 
For the following models: JCMRI64, JCMRI128 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
User’s Guide 
Version 1.0  
						

							Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 1
FCC Warning Statement 
 
This equipment  has been tested and found to comply  with the limits for a class 
B digital device pursuant to Part 15 of the FCC rules.  These limits are 
designed to provide  reasonable protection against har mful interference in a 
residential installation.  This equipment generates, use s and can radiate radio 
frequency energy.  If  not installed and used in accordance with the instructions, 
it may cause harmful int erference to radio communications.  Howe ver, there is 
no guarantee that interference will not occur in a particular in stallation.  If the 
equipment does cause harmful interference to radio or television reception, 
which can be determined by turning th e equipment on and off, the user is 
encouraged to try and corr ect the interference by o ne or more of the following 
suggestions. 
· Reorient or relocate the rece iving antenna 
· Increase the distance between the equipment a nd the receiver  
· Connect the equipment to a different powe r outlet other than the 
one where receiver is connected 
· Consult a certified television or radio technician 
 
LIMITED WARRANTY 
Addonics guaran tees that every product is free from physical defec ts in material 
and workmanship dur ing the warranty period specifie d for each product when 
used within the limits set forth in th e Specifications section in the user guide. 
Unauthorized tam pering of the product or using it outside the scope of the 
product specifications w ill result in voiding th e warranty. If the product prove s 
defective during th is warranty period, call Addonics Tec hnical Support to 
obtain a Return  Authorization number. BE SURE TO HAV E YOUR PROOF 
OF PURCHASE ON HAND WHEN CALLING. RETURN REQUESTS 
CANNOT BE PROCESSED WITHOUT PROOF OF PURCH ASE. When 
returning a product, mark the Return Authorization number clearly o n the 
outside of the package and include your original proof of purchase. Customers 
are responsible for paying the shipping and h andling of the produc ts to 
Addonics warran ty service location. 
IN NO EVENT SHALL ADDONICS’ LIABILITY EXCEED THE PRICE 
PAID FOR THE PRODU CT FROM DIRECT, INDIRECT,  SPECIAL, 
INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM 
THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR 
ITS DOCUMENTATION. Addonics makes no warranty or representation, 
expressed, implied, or statuary, with respect to its products or the contents or 
use of the user guide and all a ccompanying software, and specifically disclaims 
its quality, performance, merchant ability, or fitness for any particular pur pose. 
Addonics reserves the right t o revise or update its products, softw are, or 
documentation without obligation to notify any individual or entity. 
 
  
						

							Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 2
Contents 
 
FCC Warning...................................................................................1 
Limited Warranty............................................................................1 
Contents............................................................................................2 
Chapter 1 General Information.........................................................3 
     Features............................................................................3  
Chapter 2 Jupiter Cipher Mobile Rack key........................................4 
Chapter 3 Keeping track of the hard drive.........................................5 
Chapter 4 Jumper Setting for Jupiter Cipher Mobile Rack.................6 
Chapter 3 Hardware Installation Guide..........................................7-9 
     Jupiter Ciph er Mobile Rack............................................10 
     Optional Hardware....................................................11-12 
     How to use Disk Manag ement...................................13-14 
Technical Support & Contact Information................................…15 
  
						

							Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 3
Chapter 1 
  
General Information 
 
The Addonics Technologies Jupiter Ciph er Mobile Rack is a portable 2.5” Hard 
Disk Drive kit. It consists of the Jupiter Cipher ExDrive enclosure and an IDE 
cradle. 
 
Features 
 
· Stylished and rugged black anodized aluminum housing  
· Compact size and light weight  
· Shock proof - up to 3 feet drop damage protection for the hard dri ve  
· Easy hard drive installation  
· Choice of standard or encr yption drive enclosure 
· The most versatile hard drive kit in the market  
· Use as a removable IDE Hard Drive on a Desktop PC.  
· Plug & Play Ope ration under Win dows 98SE, Me , 2000, XP and 2003 
Server 
· Portable: Enclosure fits any Briefcase or Notebo ok PC Case. 
 
Encryption 
· Hardware based 64-bit DES or 128-bit TDES full disk encryption  
· High performance - Data is encrypted and decrypted on th e fly by a 
certified crypto graphic engine inside an  ASIC without taking any CPU 
resources  
· Encryption / Decryption via a har dware key, just like using a r egular key to 
open a door.  
· Simple to deploy  with no training required, no softw are to install and no 
password to remember  
· Platform independ ency - There is no software or driver to install t o use 
Addonics encryption products. As a result, i t can be deployed in any 
systems runnin g any OS. This is important in organization with multi 
platform computin g and legacy sy stems. 
 
 
Jupiter Cipher Mobile Rack 
 
Item Number Product Description 
JCMRI64 Jupiter Cipher 64-bit Mobile R ack for 2.5” IDE har d drive 
JCMRI128 Jupiter Cipher 128-bit Mobile Rack for 2.5” IDE har d 
drive  
						

							Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 4
Chapter 2  Jupiter Cipher Mobi le Rack key 
 
Check to make sure you have the correct version of Jupiter Cipher Mobile Rack 
key. The key  should match  the label at the bottom of the drive enclosure 
 
 
 
 
 
 
 
 
 
 
IMPORTANT  
 
There is no back door for the Jupiter Cipher Mobile Rack encrypted hard 
drive if the key is lost or stolen.  
 
To ensure there is a spar e key, your Jupiter Ciph er Mobile Rack bundled kit 
comes with one pair of Jupiter Cipher Mobile Rack keys. These 2 keys have 
identical encryption code. One of these key s should be kept in a safe and secure 
location and can be sent back to Addo nics for duplicating additional keys. If 
you are dow n to the last key, be sure to make a back up of  all the data stored 
inside your encrypted hard drive prior to sending t he last key to Addonics. 
Addonics is not responsible fo r key lost in the mail or retrieval of the data 
inside the encrypted hard drive. 
 
Ø The CIPHER key MUST be inserted at the front of the drive enclosure 
in order for the drive to be ACTIVATED. 
Ø Once the drive is INITIALIZED using the Ciph er Key that comes with 
the kit, the drive can only be accesse d by the original key. 
Ø The 2 keys that come with each Jupiter Ciph er Mobile Rack bundled 
kit has their own uni que encryption code.  So  the keys among different 
kits are not interchangeable. 
 
If you have multi ple sets of Jupiter Cipher Mobile Rack kits and would like all 
the keys to have the same encryption code, y ou may make this request at the 
time of your order or mail the keys together with master  key back to Addonics 
to recode them for you. Again be sure th at you keep a spare key with you. Make 
a back up of your data if you are mailing i n your last key. 
 
 
 
 
 
Yellow label DES -64 
stands for Jupiter 
Cipher Mobile Rack 
64-bit key 
 
 
Green label TDES -128 
stands for Jupiter Cipher 
Mobile Rack 128-bit key 
  
						

							Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 5
Chapter 3 Keeping track of the hard drive  
 
If you are usin g the Jupiter Ciph er Mobile Rack to encrypt multiple hard 
drives, it is importa nt to label your hard dri ve if you are taking t he drive out of 
the enclosure.  The hard dri ve with Jupiter Ciph er Mobile Rack encryption will 
look like a brand new drive when attach dir ectly to the IDE or SATA controller 
of a computer. Th ere will be no  partition or any hint to indicate th at the drive 
contains encrypted data.  When the drive is partitioned, all th e encrypted data 
will be lost.  
 
The same holds true if a hard drive already has data on it is installed into the 
Jupiter Ciph er Mobile Rack. The computer detects the hard drive as a brand 
new drive or a drive that is unallocated. Once y ou proceed to partition th e 
drive, the data th at was on the hard dr ive will be erased and cannot be 
recovered. 
 
A Jupiter Ciph er Mobile Rack encrypted hard dr ive can be moved to another 
Jupiter Cipher Mobile Rack drive enclosure. But the same key used in 
encrypting the ha rd drive must be  used in the new drive enclosure in order to 
access the drive. 
 
If you are installing multiple Jupiter Cipher Mobile Rack drive kits into a 
large organization, it is important to keep track of the drive and the 
encryption key. O nce it gets mixed up, there is no possible way to recov er 
the data on the encrypted hard drive. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 6
Chapter 4  Jumper Settings Inside the Jupiter Cipher 
Mobile Rack 
 
Configuration: 
Jupiter Cipher ExDrive enclosure is placed inside IDE cradle. IDE cradle 
is connected to the IDE Controller on the mainboard with an IDE cable. 
 
Note: We recommend setting the hard dr ive to MASTER mode/setting at all 
times. (Default setting) 
                          J4 Pin Definition for Master Setting 
 
 
 
  J1 Pin Definition for Mobile Rack 
 
 
 
 
Since the Jupiter Mobile Rack w ill be used internally without external AC 
adapter,  the switch from the case must be switch to the left, labeled INT to grab 
power from system. 
 Be sure the Jupiter Cipher Mobile Rac k key is inserted into the dr ive enclosure 
prior to turning on the power. Under such condition, the power to the system 
will have to be turned off  and turned back on with the Ciph er key already 
inserted into the drive enclosure in order for the h ard drive to be  detected by  the 
system. 
The Jupiter Cipher Mobile Rack drive enclosure can be  used as an internal 
removable hard drive or as a drive cartridge by  installing the optional drive 
cradle in to the drive bay o f a Desktop, Server or any co mputing equipment.   
 
Hard Drive Brand J4 Jumper Setting 
Hitachi 
NEC 
Fujitsu 
Toshiba 
Pin 1~6 Open 
Hard Drive Setting J1 Jumper Setting 
Master Pin 1 – Pin 3 Short 
Pin 2 – Pin 4 Short  
						

							Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 7
Chapter 5  
Hardware Installation Guide 
 
Exploded View of  Enclosure shown with various components 
  
						

							Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 8
Step 2 
Align the male IDE connector on the 
2.5” hard drive with the female IDE 
connector on the PCB. Pus h the hard 
drive till the connector pins on the hard 
drive is fully seated inside the 
connector on the PCB.  
 
 
 
 
Step 3 
Wrap the shock absorbe r around the 
hard drive and PCB. 
 
 
 
 
 
 
 
Step 4 
Turn  over the PCB and sec ure the 
hard drive to the PCB w ith the 
mounting screws that come with the 
kit. 
 
 
 
 
 
 
Step 5 
Mount th e board to the bottom cov er. 
 
 
 
 
 
 
 
 
 
 
 
  
						

							Addonics Technologies – Jupiter Cipher Mobile Rack User’s Guide v1.0 9
Step 6 
Put the top cove r on by holding it in n ear 
vertical position and sliding th e two 
metal clips inside the two small slots on 
the rear of the bottom cove r. 
 
 
 
 
 
 
 
Step 7 
Lower the front of the top cover and 
makin g sure the two cov ers lined up 
properly. Tighten the small retaining 
screw on the front of the bottom cover 
to close the enclosure.