Home > Addonics Technologies > iSCSI Systems > Addonics Technologies iSCSI Systems SAN Storage Rack rris8dr User Manual

Addonics Technologies iSCSI Systems SAN Storage Rack rris8dr User Manual

Add to Favourites
    Download as PDF

    View the Addonics Technologies iSCSI Systems SAN Storage Rack rris8dr User Manual for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 Addonics T E C H N O L O G I E S iSCSI Rack Model: RRIS8DR User’s Guide FCC Warning Statement This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. If not installed and used in...
    Page 2 SATA drive port assignments Installing SATA drives on the iSCSI Rack Using 3.5” SATA hard disk drive, slide the drive into the drive bay. Close the front panel and using the key provided, turn the key lock to the Lock position. This will secure the drive and turn on the power to the hard drive. Note: The iSCSI Rack has an Addonics ISC8P2G-S iSCSI Subsystem mounted, for more detailed information on the Addonics ISC8P2G- S iSCSI Subsystem, refer...
    Page 3 Top View Getting started Before starting, prepare the following items. 1. A server or workstation with a NIC or iSCSI HBA. 2. CAT 5e, or CAT 6 network cables for web GUI port and iSCSI data ports. W e recommend CAT 6 cables for best performance. 3. Gigabit LAN switches. 4. Setup the hardware connection of the ISC8P2G-S before powering up servers and iSCSI Rack. Connect the web GUI port cable, and ISC8P2G-S data port cables first. LCM (LCD Control Module) Display Front View...
    Page 4 After login, you can choose the Quick Install function block on the left side of window to do configuration. Figure 1.0 There are four indicators at the top-right corner of the web GUI. Figure 1.1 1. RAID light: Green LED means RAID works well. Red LED represents RAID failure. 2. Temperature light: Green LED is normal. Red LED represents abnormal temperature. 3. Voltage light: Green LED is normal. Red LED represents abnormal voltage status. 4. UPS light: Green...
    Start reading Addonics Technologies iSCSI Systems SAN Storage Rack rris8dr User Manual
    All Addonics Technologies manuals