Addonics Technologies Duplicator Subsystem DDU11SAS user guide web

Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v8.1.11
T E C H N O L O G I E S
www.addonics.com
User Guide
1:11 Blu-Ray / DVD Duplicator
(DDU11SAS)         

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Diagram
10 Destination 
ODD Ports
LCD Console Display
EN T
E SC
Dupl ic a to r P anel
LC D
S crol l  U p
S crol l  D ow n
E
xe cu te s F unctio n
C ance ls  F unctio n
15-pin SATA power connector 
Source ODD Port
HDD Port for
image burning 

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Quick Guide
Installing the 1:11 optical duplicator
Step 1
Insert the 1:11 Blu-Ray / DVD Duplicator into standard 5.25” drive ba y.
Step 2
Connect the power cable from your  system to the SATA power connector.
Step 3
Connect  the  source  drive to the  source  SATA port  via SATA  cable  and  the target 
drives to the destination S ATA  port via SATA  cable.
 
Step 4
Screw the...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
Pan el Functions
E N T
ESC
Duplic ator P anel
LCD
Scroll  Up
Scroll  Down
Execut
es Function
Canc els Function
The D uplicato r h as  6 f unctions  t o  choose  from:
1 . Copy
2 . T est
3 . T est & Copy
4 . V erif y
5 . Compare
6 . Prescan
7 . Disc I nfo
8 . Select Source
9 . Image
10. Edit  T rack
1 1 . Light scribe
12. Se tu p
7.1  S ource
7 .2  T arget9 .1  Load
9 .2  Delet e...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
1. CopyFunction#1 Copy , instant  copy source  (disc/image)  to  the  target  drives  (optical  writes).  Use Function#8 
to  select  source  drive before  copying.  Select  function#1.  place  a  source  disc into source  drive and blank 
disc  into the target  drives.  A rewriteable  disc  can be used  as target  media,  however  all  data  will be 
erased before copying.
Press...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
9. Image
Function#9 Image is valid only when a hard disk is installed. Disc is lo\
aded to hard disk as an
image file.
9.1 Load
Load function loads whole disc data from any writers into the current pa\
rtition of the hard disk.
“P:A” means current partition is A.
9.2 Delete Image
If you want to delete an image file stored in a particular partition, yo\
u can use this function to...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
9.9 Format HDD
Hard disk must be formatted by the system for the very first time. Hard \
disk will be partitioned into
the chosen partition format.  If no hard disk is installed, LCD will sho\
w the message as No  Valid HDD!
All  data  on the  hard  drive  will be  erased  after  the hard  disk format.  After the hard  drive  is formatted 
correctly , LCD  will show  “ Format  HDD...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
10.3 Close Session
Single session format is used for Audio CD, and commercial audio player is not able to play open
session audio CD, therefor session must be closed to max. playback compa\
tibilit y. However , no
more tracks can be added once session is closed.
1 1 LightScribe (Optional Function)LightScribe is an optical disc recording technology that uses specially \
coated...

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
To select any function from #1 to # 13 as the first item appears on the s\
creen whenever system is
turned on.
12.6  Auto V erify
T o set if auto verify target discs readability after copy function.  The default is Of f. Press ▼ to select On.
12.7  Auto Compare
T o set if auto do comparison after copy function to check if source and t\
arget disc are identical.
The default is Of f....

www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
12.19 Quick Compare
Quick Compare is related to function#5 Compare. Once compare error byte \
reach to the setting
figures, compare process will stop.
12.20 Link Mode Select (Select Models)
Now press  ESC and ▼ to enter  the following  screen.  Press  ENT to  enter  the “Link  Mode  Select” 
screen.  Use ▲ ▼ to choose  between  the  Stand  Alone,  Middle T ower  or Last  Tower  modes...