Home > Addonics Technologies > Raid Tower > Addonics Technologies 4U RAID Rack RR2035 user guide

Addonics Technologies 4U RAID Rack RR2035 user guide

Download as PDF Print this page Share this page

Have a look at the manual Addonics Technologies 4U RAID Rack RR2035 user guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

$Page 2 www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Power Switch: This is the switch to power on devices connected to the power supply. The power LED will light up to indicate power is supplied. Note: The main power switch located at the back of the enclosure must be turne\ d on first. Reset Button: Not operational. Buzzer Reset: Pressing the button stops the buzzer from making a sound. The buzzer will make a sound when...$

$Page 3 www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ How to Remove the Top Cover: 1. Locate the 2 screws at the back of the storage rack 2. Turn screws counterclockwise to loosen. 3. Lift the top cover and pull towards the rear end of the rack. Thermal Management Card on the RAID Rack Features: Fan1 to Fan8 could be set either “ENABLE” or “DISABLE”. When\ all the fans are set on “DISABLE”, the Fan LED will have no...$

$Page 4 www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ 5SA Disk Array mounted on the RAID Rack D1 – D5: HD1 – HD5 power switch D6: Reset Switch for buzzer alarm and Overheating Press the Reset Switch to stop the alarm, and Overheating LED goes off. D7 – D11: Power and HDD access LED LED light is GREEN when power is ON. LED light is blinking and its color\ is ORANGE indicating HDD access. POWER SWITCH Each individual...$

$Page 6 www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Default factory DIP Switch setting: SW1 – RAID Setting DIP Switch BZS – Error buzzer function EZ – Automatic rebuilding to spare drive (one of the drives on the raid is s\ et as a spare). If EZ is ENABLED anda drive failure occurs, the spare will automatically act as a drive replacement and rebuilding will automatical\ ly start. M2 – RAID mode 2 M1 – RAID...$

$Page 7 www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Note: When the default factory RAID setting is used, independent drive configu\ ration and optical drive are supported only when connecting to controllers with Silicon Image Sil3124, Sil3132 chip set or controllers that are Port Multiplier \ (PM) compatible. Simultaneous DVD writing was tested using the Nero Burning R\ om. LED Pin Header J1 – Drive Activity LED P5 – Activity...$

$Page 11 Notes on Spare Drives using the Easy RAID Setting (EZ) When EZ function is ENABLED, the auto-rebuilding to spare drive is autom\ atic. The degraded RAID group will start rebuilding automatically by using the\ existing spare drive. * Spare drive can be either plugged before RAID building or a new drive \ can be plug as the spare drive when RAID rebuild is required. A. Which port acts as a spare drive? The last drive will automatically become the spare drive. For a 3-drive RAID5 with spare:...$

View all the pages

Add page 11 to Favourites

image text

Enable zoom

							Notes on Spare Drives using the Easy RAID Setting (EZ)
When EZ function is ENABLED, the auto-rebuilding to spare drive is autom\
atic.
The degraded RAID group will start rebuilding automatically by using the\
 existing 
spare drive.
* Spare drive can be either plugged before RAID building or a new drive \
can be plug 
as the spare drive when RAID rebuild is required.
A.  Which port acts as a spare drive?
  The last drive will automatically become the spare drive.
  For a 3-drive RAID5 with spare:
  Drives connected to SATA ports 1~3 belong to the active RAID5 array and  
  drive connected to port 4 is the spare.
  For a 4-drive RAID10 with spare:
  Drives connected to SATA ports 1~4 belong to the active RAID10 array and  
  drive connected to port 5 is the spare.
  For a 2-drive RAID1 with spare:
  Drives connected to SATA ports 1& 4 belong to the active RAID1 array and  
  drive connected to port 5 is the spare.
B.  When will rebuild action start?
  •  When the raid fails and EZ is enabled, the HPM-XA will    
    automatically rebuild the RAID group using the spare.
  •  When the raid fails and EZ is disabled, the HPM-XA will NOT  
    rebuild the raid group unless you install a good drive to replace the  
  failed drive.
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/

All Addonics Technologies manuals Comments (0)

Addonics Technologies 4U RAID Rack RR2035 user guide

Related Manuals for Addonics Technologies 4U RAID Rack RR2035 user guide