Addonics Technologies 4U RAID Rack RR2035 user guide
View the Addonics Technologies 4U RAID Rack RR2035 user guide for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 2
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Power Switch: This is the switch to power on devices connected to the power
supply. The power LED will light up to indicate power is supplied.
Note: The main power switch located at the back of the enclosure must be turne\
d
on first.
Reset Button: Not operational.
Buzzer Reset: Pressing the button stops the buzzer from making a sound. The
buzzer will make a sound when...](http://img.usermanuals.tech/thumb/181/2440/w300_4u-raid-rack-rr2035-user-guide-1478565541_d-1.png "Page 2
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Power Switch: This is the switch to power on devices connected to the power
supply. The power LED will light up to indicate power is supplied.
Note: The main power switch located at the back of the enclosure must be turne\
d
on first.
Reset Button: Not operational.
Buzzer Reset: Pressing the button stops the buzzer from making a sound. The
buzzer will make a sound when...")
![Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
How to Remove the Top Cover:
1. Locate the 2 screws at the back of the
storage rack
2. Turn screws counterclockwise to
loosen.
3. Lift the top cover and pull towards the
rear end of the rack.
Thermal Management Card on the RAID Rack
Features:
Fan1 to Fan8 could be set either “ENABLE” or “DISABLE”. When\
all the fans are set
on “DISABLE”, the Fan LED will have no...](http://img.usermanuals.tech/thumb/181/2440/w300_4u-raid-rack-rr2035-user-guide-1478565541_d-2.png "Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
How to Remove the Top Cover:
1. Locate the 2 screws at the back of the
storage rack
2. Turn screws counterclockwise to
loosen.
3. Lift the top cover and pull towards the
rear end of the rack.
Thermal Management Card on the RAID Rack
Features:
Fan1 to Fan8 could be set either “ENABLE” or “DISABLE”. When\
all the fans are set
on “DISABLE”, the Fan LED will have no...")
![Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
5SA Disk Array mounted on the RAID Rack
D1 – D5: HD1 – HD5 power switch
D6: Reset Switch for buzzer alarm and Overheating
Press the Reset Switch to stop the alarm, and Overheating LED
goes off.
D7 – D11: Power and HDD access LED
LED light is GREEN when power is ON. LED light is blinking and its color\
is
ORANGE indicating HDD access.
POWER SWITCH
Each individual...](http://img.usermanuals.tech/thumb/181/2440/w300_4u-raid-rack-rr2035-user-guide-1478565541_d-3.png "Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
5SA Disk Array mounted on the RAID Rack
D1 – D5: HD1 – HD5 power switch
D6: Reset Switch for buzzer alarm and Overheating
Press the Reset Switch to stop the alarm, and Overheating LED
goes off.
D7 – D11: Power and HDD access LED
LED light is GREEN when power is ON. LED light is blinking and its color\
is
ORANGE indicating HDD access.
POWER SWITCH
Each individual...")