Home > Addonics Technologies > HDD Duplicator > Addonics Technologies 111 Hard DriveSSD Duplicators M2HDU112S User Manual

Addonics Technologies 111 Hard DriveSSD Duplicators M2HDU112S User Manual

Add to Favourites
    Download as PDF

    View the Addonics Technologies 111 Hard DriveSSD Duplicators M2HDU112S User Manual for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 www.addonics.com 1:9 M2 /SSD/HDD HS Duplicator PRO (M2HDU11-2S) Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/
    Page 2 Overview 1www.addonics.comTechnical Support (M-F 8:30 am – 6:00 pm) WARNING: Please remember to set the power supply to your local outlet voltage prior to plugging in the power cord. Failure to do so may damage the power supply. Power Switch Power Connector Power Select Cooling Fans Source Select Jumper 3.5” Source 2.5” Source Targets Power Button To ControllerNot Used 2.5” Source3.5” Source Control Panel Source Select Jumper NOTE: The provided jumper MUST be connected between “To Controller” and...
    Page 3 M.2 Installation Phone: 408-453-6212Email: www.addonics.com/support/query/ 2 Step 1. For 80mm device, remove the screw from the 80mm Standoff before proceeding. Otherwise, place Metal Standoff over mounting hole for 30mm, 42mm, or 60mm device. Note: An extra screw and standoff are provided, when installing 60mm or 80mm media, remove the extra parts. Step 3. Secure the device in place with the mounting screw. 80mm StandoffMetal Standoff
    Page 4 Connecting the Power Cable and Powering On a. Connect the power cord provided from the wall outlet to the back of the tower. b. Turn on the main power switch on the rear of the chassis. c. Push the power button on the front of the unit to turn on the HDD duplicator. Quick Start By default, the duplicator will initialize, scan for drives and offer the copy function. Insert the source and target drives, power up the unit, wait for the copy function to appear, then press ENT. Canceling Functions When...
    Start reading Addonics Technologies 111 Hard DriveSSD Duplicators M2HDU112S User Manual

    Related Manuals for Addonics Technologies 111 Hard DriveSSD Duplicators M2HDU112S User Manual

    All Addonics Technologies manuals