ADDERLink XUSB PRO Manual

							welcome
contents
installation
 
operation
rter
 
inormation
20
Radio Frequency Energy
A Category 5 (or better) shielded twisted pair cable must be used to c\
onnect 
the units in order to maintain compliance with radio frequency energy em\
ission 
regulations and ensure a suitably high level of immunity to electromagne\
tic 
disturbances.
All other interface cables used with this equipment must be shielded in \
order 
to maintain compliance with radio frequency energy emission regulations \
and 
ensure a suitably high level of immunity to electromagnetic disturbances\
.
European EMC directive 2004/108/EC
This equipment has been tested and found to comply with 
the limits for a class A computing device in accordance with 
the specifications in the European standard EN55022. These 
limits are designed to provide reasonable protection against 
harmful interference. This equipment generates, uses and 
can radiate radio frequency energy and if not installed and used in acco\
rdance 
with the instructions may cause harmful interference to radio or televis\
ion 
reception. However, there is no guarantee that harmful interference will\
 not 
occur in a particular installation. If this equipment does cause interfe\
rence to 
radio or television reception, which can be determined by turning the eq\
uipment 
on and off, the user is encouraged to correct the interference with one \
or more 
of the following measures: (a) Reorient or relocate the receiving ante\
nna. (b) 
Increase the separation between the equipment and the receiver. (c) Co\
nnect 
the equipment to an outlet on a circuit different from that to which the\
 receiver 
is connected. (d) Consult the supplier or an experienced radio/TV tech\
nician for 
help. 
FCC Compliance Statement (United States)
This equipment generates, uses and can radiate radio frequency energy 
and if not installed and used properly, that is, in strict accordance wi\
th the 
manufacturer’s instructions, may cause interference to radio communic\
ation. 
It has been tested and found to comply with the limits for a class A com\
puting 
device in accordance with the specifications in Subpart J of part 15 o\
f FCC rules, 
which are designed to provide reasonable protection against such interfe\
rence 
when the equipment is operated in a commercial environment. Operation of\
 this 
equipment in a residential area may cause interference, in which case th\
e user at 
his own expense will be required to take whatever measures may be necess\
ary 
to correct the interference. Changes or modifications not expressly ap\
proved by 
the manufacturer could void the user’s authority to operate the equip\
ment.
Canadian Department of Communications RFI statement
This equipment does not exceed the class A limits for radio noise emissi\
ons from 
digital apparatus set out in the radio interference regulations of the C\
anadian 
Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioé\
lectriques dépassant 
les limites applicables aux appareils numériques de la classe A presc\
rites dans 
le règlement sur le brouillage radioélectriques publié par le m\
inistère des 
Communications du Canada.   
						

							welcome
contents
installation
 
operation
rter
 
inormation
21
www.ctxd.com Documentation by:
© 2014 Adder Technology Limited
All trademarks are acknowledged.
Part	No.	MAN-X-USBPRO	•	Release	2.1a
Web:  www.adder.com
Contact:  www.adder.com/contact-details
Support: forum.adder.com