ADDERLink XUSB PRO Manual

AdderLink X-USBPRO
Analog video and USB extenders
contents   

welcome
contents
installation
 
operation
rter
inormation
1
Contents
Welcome
Introduction ........................................................................\
.........2
Supplied items ........................................................................\
.....3
Optional items ........................................................................\
.....4
Installation
Connections ........................................................................\
.........5
Mounting...

welcome
contents
installation
 
operation
rter
inormation
2
USB
device USB
device
ADDER®
PC
A UDIO
VIDEO (1) VIDEO (2)
USB
Upto300 metr es
separation
CA Tx link cable (1)
CA Tx link cable (2)
ADDER®
Welcome
Introduction
Thank you for choosing the AdderLink X-USBPRO 
or X-USBPRO-MS2 extenders which provide a 
very effective way to put distance between your 
computer and its peripherals. 
The compact casings and ease of use of the 
modules belie the ingenuity of their operation. 
Using our proprietary...

welcome
contents
installation
 
operation
rter
inormation
3
Supplied items
X-USBPRO local module
Power adapter and country- specific power lead (for remote module)
X-USBPRO remote module
USB (A to B type) lead
Audio lead(3.5mm jacks)
Video lead(15 way, male to male)
Video lead(15 way, male to male)
AdderLink X-USBPRO extender modules
X-USBPRO-MS2 local moduleX-USBPRO-MS2 remote module
AdderLink X-USBPRO-MS2 dual video extender modulesThe MS2 variant package includes all of the above ancillary items...

welcome
contents
installation
 
operation
rter
inormation
4
Optional items
Rack mount plate for X-USBPRO module (useable for the local or remote modules)
Part number: X-RMK-FASCIA
Rack mount chassis
Part number: X-RMK-CHASSIS
Rack mount plate for X-USBPRO-MS2 module (useable for the local or remote modules)
Part number: X-RMK-FASCIA-DUAL
Power adapter for local module (if USB powering not possible)
Part number: PSU-IEC-5VDC-2.5A
Country-specific power cords
CAB-IEC-AUS (Australia)
CAB-IEC-EURO...

welcome
contents
installation 
 
operation
rter
inormation
5
Installation
Connections
Installation of the X-USBPRO modules is straightforward with minimal 
configuration requirements in most cases. 
•	Connections at the local module
•	Connections at the remote module
Important
The X-USBPRO can be used with other USB hubs in the system, but please n\
ote 
that due to power constraints, the local unit should not be connected to\
 the 
downstream port of a bus-powered USB hub. Additionally, X-USBPRO-MS2...

welcome
contents
installation 
 
operation
rter
inormation
6
From USB port
From primary video  output port
Connections at the local module
1 Where possible ensure that power is disconnected from the computer 
system to be connected. 
3 Use the supplied USB cable to 
link the USB socket of the local 
module to a vacant USB socket 
on the computer.2 Use the supplied video lead to 
link the video input socket of 
the local module to the video 
output port of the computer. 
 [MS2 variant only] Optionally...

welcome
contents
installation 
 
operation
rter
inormation
7
5 Connect a category 5, 5e, 6, 7 or 7a link cable (up to 300 metres in le\
ngth) 
to the ‘TO REMOTE’ socket on the local module.
To local video displayLink to remote module
[MS2 variant only] Connect a second 
category 5, 5e, 6, 7 or 7a link cable (up 
to 300 metres in length) to the upper 
socket on the MS2 local module.
Primary CATx link cable
Secondary CATx link cable
6  Optionally connect a local video display to the video out...

welcome
contents
installation 
 
operation
rter
inormation
8
Local module power connection
The standard X-USBPRO and the X-USBPRO-MS local modules differ in the wa\
y 
that they are powered: 
•	 The	X-USBPRO	local	module	is	designed	to	derive	its	power	from	the	host	
computer via the USB connection. If this is not possible, then use an op\
tional 
Adder power adapter (part number: PSU-IEC-5VDC-2.5A), available from 
your Adder stockist
•	The X-USBPRO-MS2 local module always requires the use of a...

welcome
contents
installation 
 
operation
rter
inormation
9
Connections at the remote module
1 Place the remote module adjacent to the user location. 
To video display
2 Attach the leads of up to four 
USB devices (two of which are 
usually a keyboard and mouse) 
to the sockets located adjacent 
to the video output connector.
3 Attach the lead from the 
video display to the video 
out socket on the remote 
module.
[MS2 variant only] Optionally 
attach the lead from a second 
video display to the...