AdderLink XD150FX Manual

20
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
This chapter contains a variety of information, including the following:
• Getting assistance - see right
• Appendix 1 - Options port pin-out
• Appendix 2 - Open source licenses
• Safety information
• Warranty
• Radio frequency energy statements
GETTING ASSISTANCE
If you are still experiencing problems after checking the information contained within this 
guide, then we provide a number of other solutions:
• Online solutions and updates –...

21
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
16
OPTIONS
APPENDIX 1 - OPTIONS PORT PIN-OUT
The OPTIONS port uses a 6p6c socket. The pin-out is listed below. 
Note: Although the pin labeled ‘Not used’ is inactive, it is still connected internally and so no links 
should be made at all to this pin. 
 Pin  Signal  Direction
 1  CTS1 / RXD2 Input to the module
 2  RXD1 Input to the module
 3 TXD1 Output from the module
 4  RTS1  / TXD2 Output from the module
 5  Not used
 6  GND Reference...

22
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
APPENDIX 2 - OPEN SOURCE LICENSES
This product includes binaries that are derived from the open source community. 
======
lwIP is licenced under the BSD licence: 
Copyright (c) 2001-2004 Swedish Institute of Computer Science. 
All rights reserved. 
Redistribution and use in source and binary forms, with or without modification, are 
permitted provided that the following conditions are met: 
1. Redistributions of source code must retain the...

23
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
WARRANTY
Adder Technology Ltd warrants that this product shall be free from defects in 
workmanship and materials for a period of two years from the date of original purchase. 
If the product should fail to operate correctly in normal use during the warranty period, 
Adder will replace or repair it free of charge. No liability can be accepted for damage due 
to misuse or circumstances outside Adder’s control. Also Adder will not be...

24
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
RADIO FREQUENCY ENERGY
All cables used with this equipment must be shielded in order to maintain compliance 
with radio frequency energy emission regulations and ensure a suitably high level of 
immunity to electromagnetic disturbances.
European EMC directive 2014/30/EU
This equipment has been tested and found to comply with the limits for a class A 
computing device in accordance with the specifications in the European standard 
EN55032....

25
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
Web:  www.adder.com
Contact:  www.adder.com/contact-details
Support: www.adder.com/support
www.ctxd.com Documentation by:
© 2016 Adder Technology Limited
All trademarks are acknowledged.
Part No. MAN-XD150FX-ADDER • Release 1.0a   

26
INSTALLATION
CONFIGURATION
OPERATION
FURTHERINFORMATION
INDEX
HT
A
Audio
receiver  12
transmitter  8
C
Connections
overview  6
D
DDX Matrix
accessing  15
Default mode  19
DHCP  16
E
EDID management  12
F
Firmware upgrade  17
G
Gateway  16
I
Indicators  18
IP Address  16
M
MAC Address  16
N
Net Mask  16
Network port
temporary connection  15
P
Power
receiver  14
transmitter  11
R
Reset button  3
Resetting  19
RS232  9,13
S
Safety information  23
Serial port
receiver  13
transmitter  9
U
USB
receiver...