ADDERLink X2 MultiScreen Manual
Here you can view all the pages of manual ADDERLink X2 MultiScreen Manual. The ADDER manuals for Extender are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
20
Image controls - sharpness and brightness (continued)
To use the image controls
1 Simultaneously, press the hotkeys (by default,
and ) along with to enter configuration
mode.
The three keyboard indicators (‘Num Lock’, ‘Caps
Lock’ and ‘Scroll Lock’) will now begin to flash in
sequence. The speed of the sequence indicates the
level of the sharpness adjustment currently applied: the slower the rate\
, the
lower the...](http://img.usermanuals.tech/thumb/176/2299/w300_adderlink-x2-multiscreen-manual-1478557382_d-20.png "Page 21
20
Image controls - sharpness and brightness (continued)
To use the image controls
1 Simultaneously, press the hotkeys (by default,
and ) along with to enter configuration
mode.
The three keyboard indicators (‘Num Lock’, ‘Caps
Lock’ and ‘Scroll Lock’) will now begin to flash in
sequence. The speed of the sequence indicates the
level of the sharpness adjustment currently applied: the slower the rate\
, the
lower the...")
20 Image controls - sharpness and brightness (continued) To use the image controls 1 Simultaneously, press the hotkeys (by default, and ) along with to enter configuration mode. The three keyboard indicators (‘Num Lock’, ‘Caps Lock’ and ‘Scroll Lock’) will now begin to flash in sequence. The speed of the sequence indicates the level of the sharpness adjustment currently applied: the slower the rate\ , the lower the...
Page 22
![Page 22
21
Skew adjustment
The twisted pair cabling supported by the X2 Multi Screen modules (category 5,
or higher) consists of four pairs of cables. Three of these pairs are u\
sed by the
modules to convey red, green and blue video
signals to the remote video monitor. Due to the
slight difference in twist rate between these
three pairs, the red, green and blue video signals
may not arrive at precisely the same time. This...](http://img.usermanuals.tech/thumb/176/2299/w300_adderlink-x2-multiscreen-manual-1478557382_d-21.png "Page 22
21
Skew adjustment
The twisted pair cabling supported by the X2 Multi Screen modules (category 5,
or higher) consists of four pairs of cables. Three of these pairs are u\
sed by the
modules to convey red, green and blue video
signals to the remote video monitor. Due to the
slight difference in twist rate between these
three pairs, the red, green and blue video signals
may not arrive at precisely the same time. This...")
21 Skew adjustment The twisted pair cabling supported by the X2 Multi Screen modules (category 5, or higher) consists of four pairs of cables. Three of these pairs are u\ sed by the modules to convey red, green and blue video signals to the remote video monitor. Due to the slight difference in twist rate between these three pairs, the red, green and blue video signals may not arrive at precisely the same time. This...
Page 23
22 The Adder test pattern generator showing its RGB crosses. In this case, the green signal can be seen out of line with the other two colours. To use skew adjustment 1 Display the test pattern. See To obtain and run the free Adder test pattern generator. The screen will show a series of fine red, green and blue crosses which should all be in line, vertically and horizontally. Skew affects the horizontal...
Page 24
![Page 24
23
Miscellaneous settings
The following are configuration settings within the modules that are n\
ot covered
in other sections of this guide. These can be achieved once within confi\
guration
mode by pressing the indicated keys:
Report X2 Multi Screen firmware version -
Before initiating this command, ensure that the system is running an app\
lication
that can display typed keys as screen characters - e.g. a word...](http://img.usermanuals.tech/thumb/176/2299/w300_adderlink-x2-multiscreen-manual-1478557382_d-23.png "Page 24
23
Miscellaneous settings
The following are configuration settings within the modules that are n\
ot covered
in other sections of this guide. These can be achieved once within confi\
guration
mode by pressing the indicated keys:
Report X2 Multi Screen firmware version -
Before initiating this command, ensure that the system is running an app\
lication
that can display typed keys as screen characters - e.g. a word...")
23 Miscellaneous settings The following are configuration settings within the modules that are n\ ot covered in other sections of this guide. These can be achieved once within confi\ guration mode by pressing the indicated keys: Report X2 Multi Screen firmware version - Before initiating this command, ensure that the system is running an app\ lication that can display typed keys as screen characters - e.g. a word...
Page 25
![Page 25
24
Further information
Troubleshooting
If you experience problems when installing or using the X2 Multi Screen \
modules, please check through this section for a possible solution. If y\
our
problem is not listed here and you cannot resolve the issue, then please\
refer to
the ‘Getting assistance’ section.
Video image at the REMOTE module is distorted or shadows appear to
the right of displayed objects.
Adjustments...](http://img.usermanuals.tech/thumb/176/2299/w300_adderlink-x2-multiscreen-manual-1478557382_d-24.png "Page 25
24
Further information
Troubleshooting
If you experience problems when installing or using the X2 Multi Screen \
modules, please check through this section for a possible solution. If y\
our
problem is not listed here and you cannot resolve the issue, then please\
refer to
the ‘Getting assistance’ section.
Video image at the REMOTE module is distorted or shadows appear to
the right of displayed objects.
Adjustments...")
24 Further information Troubleshooting If you experience problems when installing or using the X2 Multi Screen \ modules, please check through this section for a possible solution. If y\ our problem is not listed here and you cannot resolve the issue, then please\ refer to the ‘Getting assistance’ section. Video image at the REMOTE module is distorted or shadows appear to the right of displayed objects. Adjustments...
Page 26
25 Safety information • For use in dry, oil free indoor environments only. • Do not use to link between buildings. • Ensure that the twisted pair interconnect cable is installed in compliance with all applicable wiring regulations. • Do not connect the CATx link interface (RJ45 style connector) to any other equipment, particularly network or telecommunications equipment. • Warning – the power adapter contains live...
Page 27
![Page 27
26
Products in the X2-Series range
The following related X2-Series items are also available:
• X2-Gold Extender (part code: X2-Gold)
This pair of modules allow you to extend keyboard, video and mouse signa\
ls
as well as microphone, stereo speaker and single RS232 serial channel up\
to
200 metres.
• X2-Silver Extender (part code: X2-Silver)
As per the X2-Gold with the exception of the audio extension facility.
•...](http://img.usermanuals.tech/thumb/176/2299/w300_adderlink-x2-multiscreen-manual-1478557382_d-26.png "Page 27
26
Products in the X2-Series range
The following related X2-Series items are also available:
• X2-Gold Extender (part code: X2-Gold)
This pair of modules allow you to extend keyboard, video and mouse signa\
ls
as well as microphone, stereo speaker and single RS232 serial channel up\
to
200 metres.
• X2-Silver Extender (part code: X2-Silver)
As per the X2-Gold with the exception of the audio extension facility.
•...")
26 Products in the X2-Series range The following related X2-Series items are also available: • X2-Gold Extender (part code: X2-Gold) This pair of modules allow you to extend keyboard, video and mouse signa\ ls as well as microphone, stereo speaker and single RS232 serial channel up\ to 200 metres. • X2-Silver Extender (part code: X2-Silver) As per the X2-Gold with the exception of the audio extension facility. •...
Page 28
![Page 28
27
Emissions and Immunity
A Category 5 (or better) twisted pair cable must be used to connect th\
e X2
modules in order to maintain compliance with radio frequency energy emis\
sion
regulations and ensure a suitably high level of immunity to electromagne\
tic
disturbances.
All other interface cables used with this equipment must be shielded in \
order
to maintain compliance with radio frequency energy emission...](http://img.usermanuals.tech/thumb/176/2299/w300_adderlink-x2-multiscreen-manual-1478557382_d-27.png "Page 28
27
Emissions and Immunity
A Category 5 (or better) twisted pair cable must be used to connect th\
e X2
modules in order to maintain compliance with radio frequency energy emis\
sion
regulations and ensure a suitably high level of immunity to electromagne\
tic
disturbances.
All other interface cables used with this equipment must be shielded in \
order
to maintain compliance with radio frequency energy emission...")
27 Emissions and Immunity A Category 5 (or better) twisted pair cable must be used to connect th\ e X2 modules in order to maintain compliance with radio frequency energy emis\ sion regulations and ensure a suitably high level of immunity to electromagne\ tic disturbances. All other interface cables used with this equipment must be shielded in \ order to maintain compliance with radio frequency energy emission...
Page 29
28 www.ctxd.com Documentation by: © 2014 Adder Technology Limited All trademarks are acknowledged. Part No. ADD0058 • Release 1.1a Web: www.adder.com Contact: www.adder.com/contact-details Support: forum.adder.com