ADDERLink INFINITY Manual
Here you can view all the pages of manual ADDERLink INFINITY Manual. The ADDER manuals for Extender are available online for free. You can easily download all the documents as PDF.
Page 31
30 Forwarding modes In essence, the job of a layer 2 switch is to transfer as fast as possible, data packets arriving at one port out to another port as determined by the destination address. This is known as data forwarding and most switches offer a choice of methods to achieve this. Choosing the most appropriate forwarding method can often have a sizeable impact on the overall speed of switching: • Store and forward is the original...
Page 32
31
ALIF 1000 general specifications
Casing (w x h x d): 198mm (7.92”) x 44mm (1.76”) x 120mm (4.8”)
Construction: 1U compact case, robust metal design
Weight: 0.75kg (1.65lbs)
Mount kits: Rack mount - single or dual units per 1U slot.
VESA monitor / wall mount chassis.
Power to adapter: 100-240VAC 50/60Hz, 0.5A,
Power to unit: 5VDC 12.5W
Operating temp: 0ºC to 40ºC (32ºF to 104ºF)
Approvals: CE, FCC
ALIF 2000...
Page 33
![Page 33
32
Appendix E
Fibre modules and cables (ALIF 2000 units only)
To suit your installation layout, two fibre modules are available for the ALIF 2000
units to suit various fibre optic cables. The specifications for all\
are summarised in
the table below:
Fibre TypeFibre size Fibre Type Colour CodeDistance
at 1Gbps
Adder part
number for
SFP module
Bar
colour
Conn.
type
Normal Applications Military Applications Suggested Print...](http://img.usermanuals.tech/thumb/176/2272/w300_adderlink-infinity-manual-1478555761_d-32.png "Page 33
32
Appendix E
Fibre modules and cables (ALIF 2000 units only)
To suit your installation layout, two fibre modules are available for the ALIF 2000
units to suit various fibre optic cables. The specifications for all\
are summarised in
the table below:
Fibre TypeFibre size Fibre Type Colour CodeDistance
at 1Gbps
Adder part
number for
SFP module
Bar
colour
Conn.
type
Normal Applications Military Applications Suggested Print...")
32 Appendix E Fibre modules and cables (ALIF 2000 units only) To suit your installation layout, two fibre modules are available for the ALIF 2000 units to suit various fibre optic cables. The specifications for all\ are summarised in the table below: Fibre TypeFibre size Fibre Type Colour CodeDistance at 1Gbps Adder part number for SFP module Bar colour Conn. type Normal Applications Military Applications Suggested Print...
Page 34
![Page 34
33
Appendix F
Additional features available on ALIF2002T
New lossless CODEC (AFZ) ALIF 2002T only
The new compression scheme builds on the existing codec and is primarily\
focused on improving the performance for “natural” images (i.e. photographs
and movies). It works in concert with the existing codec and is automat\
ically
selected whenever there is a benefit to do so.
The new codec is lossless and is very low latency (a small fraction...](http://img.usermanuals.tech/thumb/176/2272/w300_adderlink-infinity-manual-1478555761_d-33.png "Page 34
33
Appendix F
Additional features available on ALIF2002T
New lossless CODEC (AFZ) ALIF 2002T only
The new compression scheme builds on the existing codec and is primarily\
focused on improving the performance for “natural” images (i.e. photographs
and movies). It works in concert with the existing codec and is automat\
ically
selected whenever there is a benefit to do so.
The new codec is lossless and is very low latency (a small fraction...")
33 Appendix F Additional features available on ALIF2002T New lossless CODEC (AFZ) ALIF 2002T only The new compression scheme builds on the existing codec and is primarily\ focused on improving the performance for “natural” images (i.e. photographs and movies). It works in concert with the existing codec and is automat\ ically selected whenever there is a benefit to do so. The new codec is lossless and is very low latency (a small fraction...
Page 35
![Page 35
34
Warranty
Adder Technology Ltd warrants that this product shall be free from defects in
workmanship and materials for a period of two years from the date of ori\
ginal
purchase. If the product should fail to operate correctly in normal use \
during the
warranty period, Adder will replace or repair it free of charge. No liab\
ility can be
accepted for damage due to misuse or circumstances outside Adder’s co\
ntrol.
Also Adder will not...](http://img.usermanuals.tech/thumb/176/2272/w300_adderlink-infinity-manual-1478555761_d-34.png "Page 35
34
Warranty
Adder Technology Ltd warrants that this product shall be free from defects in
workmanship and materials for a period of two years from the date of ori\
ginal
purchase. If the product should fail to operate correctly in normal use \
during the
warranty period, Adder will replace or repair it free of charge. No liab\
ility can be
accepted for damage due to misuse or circumstances outside Adder’s co\
ntrol.
Also Adder will not...")
34 Warranty Adder Technology Ltd warrants that this product shall be free from defects in workmanship and materials for a period of two years from the date of ori\ ginal purchase. If the product should fail to operate correctly in normal use \ during the warranty period, Adder will replace or repair it free of charge. No liab\ ility can be accepted for damage due to misuse or circumstances outside Adder’s co\ ntrol. Also Adder will not...
Page 36
![Page 36
35
Radio Frequency Energy
A Category 5 (or better) twisted pair cable must be used to connect th\
e units in
order to maintain compliance with radio frequency energy emission regula\
tions
and ensure a suitably high level of immunity to electromagnetic disturba\
nces.
All other interface cables used with this equipment must be shielded in \
order
to maintain compliance with radio frequency energy emission regulations \
and
ensure a...](http://img.usermanuals.tech/thumb/176/2272/w300_adderlink-infinity-manual-1478555761_d-35.png "Page 36
35
Radio Frequency Energy
A Category 5 (or better) twisted pair cable must be used to connect th\
e units in
order to maintain compliance with radio frequency energy emission regula\
tions
and ensure a suitably high level of immunity to electromagnetic disturba\
nces.
All other interface cables used with this equipment must be shielded in \
order
to maintain compliance with radio frequency energy emission regulations \
and
ensure a...")
35 Radio Frequency Energy A Category 5 (or better) twisted pair cable must be used to connect th\ e units in order to maintain compliance with radio frequency energy emission regula\ tions and ensure a suitably high level of immunity to electromagnetic disturba\ nces. All other interface cables used with this equipment must be shielded in \ order to maintain compliance with radio frequency energy emission regulations \ and ensure a...
Page 37
36 www.ctxd.com Documentation by: © 2013 Adder Technology Limited All trademarks are acknowledged. Part No. MAN-ALIF • Release 2.3d Web: www.adder.com Contact: www.adder.com/contact-details Support: forum.adder.com
Page 38
37 HT Index A Adaptive 30 AFZ 33 ALIF2002T 33 Anti-dither support 33 B Background Refresh 29 Bracket rack mount 8 Brackets fitting 8 Browser-based utility 20 C Cable spec null modem 25 CODEC 33 Colour Depth 29 Configuration browser-based utility 20 styles 2 Connections network link 14 overview 9 RX audio 16 RX AUX port 17 RX power in 18 RX USB devices 17 RX video display 15 TX audio links 11 TX AUX port 12 TX power in...