ADDER TS4 Manual
Here you can view all the pages of manual ADDER TS4 Manual. The ADDER manuals for Extender are available online for free. You can easily download all the documents as PDF.
Page 11
0 6 Beneath the Screens field, click the ‘+’ button to display the Add Screen dialog so that you can add a new screen (computer system): 7 In the ‘Screen Name’ field, enter the ‘Hostname’ (see step 4) of one o\�f the computer systems and choose the corresponding ‘Switch Number’ (its port number on the Adder TS4 unit). You can optionally use the other controls within this dialog: Aliases - Enter one or more unique names that you...
Page 12
PC1PC2 PC3PC4 (PRIMARY) 0 to 00% of the left of PC goes to 0 to 00% of PC-Primary 0 to 00% of the bottom of PC goes to 0 to 00% of PC4 0 to 00% of the right of PC-Primary goes to 0 to 00% of PC 0 to 00% of the bottom of PC-Primary goes to 0 to 00% of PC3 0 to 00% of the top of PC3 goes to 0 to 00% of PC-Primary 0 to 00% of the right of PC3...
Page 13
12345678 ON 12345678 ON Configuration switch settings The underside of the TS4 unit features a block of eight switches which are used to configure various fundamental settings. When shipped, all switches are set to OFF, which produces normal operation within the TS4 unit. Further details about switch settings can be found within sections of this guide dealing with \�specific setup issues. OFF: Normal operation ON:...
Page 14
3 Hot plugging and mouse restoration It is strongly recommended that you switch off a host system before attempting to connect it to the Adder TS4. However, if this is not possible then you need to ‘hot plug’ the system while it is still running. There is not normally a danger of damage to the system, however, when PS/2-style mouse or IntelliMouse communications (i.e. non-USB) are interrupted, often they fail to re-initialise when...
Page 15
4 SECT 4 Operation In operation, the Adder TS4 allows you to quickly switch between up to f\�our systems. One system can be accessed at a time, whereupon the common keyboard and mouse are linked to that system. The Adder TS4 deceives the other systems that they still have a keyboard and mouse connected to them in order that they respond quickly and correctly once they are again selected. The SYSTEM readout On the front panel of the...
Page 16
5 Configuration options The Adder TS4 provides numerous configuration options to ensure that it best suits your circumstances and the tasks carried out by the connected systems. Setting (or changing) a password The password option allows you to quickly impose a level of security suitable to prevent system tampering while you are away from your desk for short periods. When enabled, the Adder TS4 will default to protected mode when...
Page 17
Mouse button switching modes You can use a three button mouse to switch between systems. However, when used in this way, the action of the middle mouse button or scroll wheel click is ‘trapped’ by the Adder TS4 and is not passed to the system. Thi\�s makes it unavailable for use in controlling applications on the selected system. The scroll wheel scrolling action is unaffected and passed on normally to the systems, only the...
Page 18
Upgrading Like all Adder products, the internal software (firmware) of the TS4 is designed to be easily upgraded in order to take advantage of a continual process of improvement and innovation. You can discover the current version of your Adder TS4 in two ways, either using the upgrade application (discussed later) or within the configuratio\�n mode as discussed next. To discover the current firmware version1 Enter...
Page 19
Further information Troubleshooting If you experience problems when installing or using the Adder TS4, please check through this section for a possible solution. If your problem is not listed here and you cannot resolve the issue, then please refer to the ‘Getting assistance’ section. Mouse does not move cursor on screen.• If you move the mouse and the activity indicator (dot on 7 segment disp\�lay) does not flash then the Adder...
Page 20
Safety information • For use in dry, oil free indoor environments only. • Not suitable for use in hazardous or explosive environments or next to highly flammable materials. • The optional power adapter is only required when the link cables used exceed 2 metres in length. Otherwise the Adder TS4 can derive its power from any of the host systems via the keyboard connections. • Warning – the optional power adapter contains live...