ADDER SmartView X PRO Manual

SmartView XProInstallation and UsePage 303.4 Creating and editing user accounts
To create user accounts:  Ensure that you are logged on as the ADMIN user.  From the main on-screen menu press F1 for MORE MENUS.  Select EDIT USER LIST from the menu.  Press INSERT to add a new user.  Type in the name of the new user and press RETURN or ENTER.  Type in the password for the new user and press RETURN or ENTER.
(You may leave the password field blank if you do not want to define a password)  Define the...

SmartView XProInstallation and UsePage 31XPros then the port numbers will be four, six or eight characters long depending
upon whether you have two, three or four levels of cascade (see figure 7). See the
end of this section and section 4.10 for an explanation of how the port numbers are
constructed. The SmartView XPro supports up to 512 computer names.
To create computer names:  Ensure that you are logged on as the ADMIN user.  From the main on-screen menu press F1 for MORE MENUS.  Select EDIT COMPUTER...

SmartView XProInstallation and UsePage 32Creating entries for computers connected to cascaded SmartViews
You can cascade SmartView 4XPro units using one, two, three or four KVM links
and SmartView 2XPro units using one or two KVM links. Section 2.5 explains the
rules that you must follow when installing a SmartView cascade. The number of
cascade links that you install determines the number of simultaneous users that can
access computers on the cascaded SmartViews. Ideally if you are cascading 4XPro
units...

SmartView XProInstallation and UsePage 33Fig. 7 - Creating menu entries for computers that are
connected to cascaded SmartViews 

SmartView XProInstallation and UsePage 34Fig. 8 - Possible cascade groups and their associated names
3.6 Setting the SETUP OPTIONS and GLOBAL PREFERENCES
The SETUP OPTIONS and GLOBAL PREFERENCES are system operating
parameters that apply to the whole system rather than to individual users. These
may only be setup or changed by the system administrator logged in using the
ADMIN account. From the main menu press F1 for MORE MENUS. Use the cursor
keys to position the menu bar over SETUP OPTIONS or GLOBAL...

SmartView XProInstallation and UsePage 353.6.1 SECURITY
Accessed from menu: SETUP OPTIONS
Settings: DISABLED, ENABLED
With security disabled there is no requirement for users to login to the system. All
users have full access to all the connected computers and full administration rights.
With security enabled, users are required to login to the SmartView. Each user is
allocated access rights to computers by the system administrator and they are only
able to see the computers that they have access to on...

SmartView XProInstallation and UsePage 36quickly select a chosen computer without activating the on-screen menu. See
section 4.8 for full details on using keyboard hotkeys to control the SmartView. We
do not normally recommend that you disable the hotkeys but if you choose to do this
then you will need to access the on-screen menu using the SmartViews front panel
controls.
3.6.4 KEYPAD CONTROLS
Accessed from menu: SETUP OPTIONS
Settings: ENABLED, DISABLED
The key controls on the front of the SmartView...

SmartView XProInstallation and UsePage 373.6.6 AUTOMATIC LOGOUT
Accessed from menu: SETUP OPTIONS
Settings: DISABLED, ENABLED
The SmartView enables you to restrict access to your computers on a login basis. If
a user forgets to logout when they have finished accessing the SmartView then the
user console may unintentionally be left with full access to all the computers. The
SmartView may be set to automatically logout unattended user consoles when the
screen saver kicks in. This reduces the risk of...

SmartView XProInstallation and UsePage 383.6.9 AUTOSCAN MODE
Accessed from menu: GLOBAL PREFERENCES
Settings: SCAN LIST, ACTIVE PCs, ALL PCs
The SmartView supports an autoscan mode that automatically scans between the
connected computers in sequence. The SmartView supports three autoscan modes.
In the first mode the SmartView will scan all the named computers that are defined
in the autoscan list (SCAN LIST). The computers defined in the scan list may be
connected to cascaded SmartViews. If you wish to...

SmartView XProInstallation and UsePage 393.6.10 AUTOSCAN TIME
Accessed from menu: GLOBAL PREFERENCES
Settings: DISABLED; 2, 5, 7, 10, 15, 20, 30 SECONDS
The autoscan time defines the length of time that the SmartView will display video
from an autoscanned computer before changing to the next computer. If the
DISABLED setting is chosen then no autoscan functions will be available.
3.6.11 OSD DWELL TIME
Accessed from menu: GLOBAL PREFERENCES
Settings: 1, 2, 3, 5, 10 SECONDS
After a successful computer...