ADDER ePower Switch 8 Slave Manual
Have a look at the manual ADDER ePower Switch 8 Slave Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 78 ADDER manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 14
Page | 12 User Guide
6.3.1. Controlling of the power outlet(s)
This command enables to control individually each power outlet or all power outlets of the same
ePowerSwitch 8XS in one command.
Command to be sent to the ePowerSwitch 8XS:
Pxy=z[CR]
Pxy=z,t
1[CR]
Pxy=z,t
1,t2[CR]
Reply from the ePowerSwitch 8XS:
Pxy=z[CR]
Pxy=z,t
1[CR]
Pxy=z,t
1,t2[CR]
Explanations:
Parameter Value Function/Remark
x address of the ePowerSwitch 1 to 16 specifies the address of the ePowerSwitch 8XS...](http://img.usermanuals.tech/thumb/176/2339/w64_epower-switch-8-slave-manual-1478560081_d-13.png "Page 14
Page | 12 User Guide
6.3.1. Controlling of the power outlet(s)
This command enables to control individually each power outlet or all power outlets of the same
ePowerSwitch 8XS in one command.
Command to be sent to the ePowerSwitch 8XS:
Pxy=z[CR]
Pxy=z,t
1[CR]
Pxy=z,t
1,t2[CR]
Reply from the ePowerSwitch 8XS:
Pxy=z[CR]
Pxy=z,t
1[CR]
Pxy=z,t
1,t2[CR]
Explanations:
Parameter Value Function/Remark
x address of the ePowerSwitch 1 to 16 specifies the address of the ePowerSwitch 8XS...")
![Page 15
Page | 13 ePowerSwitch 8XS
6.3.2. Reading out the power outlet status
This command enables to read out the status of each power outlet.
Command to be sent to the ePowerSwitch 8XS:
Rxy[CR]
Reply from the ePowerSwitch 8XS:
Rxy=z[CR]
Explanations:
Parameter Value Function/Remark
x
address of the ePowerSwitch 1 to 16 specifies the address of the ePowerSwitch 8XS
y
number of the Power Outlet 1 to 8 specify the number of the power outlet
z status 0 status of the corresponding...](http://img.usermanuals.tech/thumb/176/2339/w64_epower-switch-8-slave-manual-1478560081_d-14.png "Page 15
Page | 13 ePowerSwitch 8XS
6.3.2. Reading out the power outlet status
This command enables to read out the status of each power outlet.
Command to be sent to the ePowerSwitch 8XS:
Rxy[CR]
Reply from the ePowerSwitch 8XS:
Rxy=z[CR]
Explanations:
Parameter Value Function/Remark
x
address of the ePowerSwitch 1 to 16 specifies the address of the ePowerSwitch 8XS
y
number of the Power Outlet 1 to 8 specify the number of the power outlet
z status 0 status of the corresponding...")
![Page 16
Page | 14 User Guide
6.3.3. Setting of the power up delays
This command enables to set the Power Up Delay individually for each power outlet. The Delay value can
be between 1 and 255 seconds (4 min 15 sec).
Command to be sent to the ePowerSwitch 8XS:
TUxy=z[CR]
Reply from the ePowerSwitch 8XS:
TUxy=z[CR]
Explanations:
Parameter Value Function/Remark
x
address of the ePowerSwitch 1 to 16 specifies the number of the ePowerSwitch 8XS
y
number of the power outlet 1 to 8...](http://img.usermanuals.tech/thumb/176/2339/w64_epower-switch-8-slave-manual-1478560081_d-15.png "Page 16
Page | 14 User Guide
6.3.3. Setting of the power up delays
This command enables to set the Power Up Delay individually for each power outlet. The Delay value can
be between 1 and 255 seconds (4 min 15 sec).
Command to be sent to the ePowerSwitch 8XS:
TUxy=z[CR]
Reply from the ePowerSwitch 8XS:
TUxy=z[CR]
Explanations:
Parameter Value Function/Remark
x
address of the ePowerSwitch 1 to 16 specifies the number of the ePowerSwitch 8XS
y
number of the power outlet 1 to 8...")
![Page 17
Page | 15 ePowerSwitch 8XS
6.3.5. Setting the restart delays
This command enables to set the Restart Delay individually for each Power Outlet. The Delay value can
be between 1 and 255 seconds (4 min 15 sec).
Command to be sent to the ePowerSwitch 8XS:
TRxy=z[CR]
Reply from the ePowerSwitch 8XS:
TRxy=z[CR]
Explanations:
Parameter Value Function/Remark
x
address of the ePowerSwitch 1 to 16 specifies the address of the ePowerSwitch 8XS
y
number of the Power Outlet 1 to 8...](http://img.usermanuals.tech/thumb/176/2339/w64_epower-switch-8-slave-manual-1478560081_d-16.png "Page 17
Page | 15 ePowerSwitch 8XS
6.3.5. Setting the restart delays
This command enables to set the Restart Delay individually for each Power Outlet. The Delay value can
be between 1 and 255 seconds (4 min 15 sec).
Command to be sent to the ePowerSwitch 8XS:
TRxy=z[CR]
Reply from the ePowerSwitch 8XS:
TRxy=z[CR]
Explanations:
Parameter Value Function/Remark
x
address of the ePowerSwitch 1 to 16 specifies the address of the ePowerSwitch 8XS
y
number of the Power Outlet 1 to 8...")
![Page 18
Page | 16 User Guide
6.3.7. Setting the power up default status
This command enables to set the power up default status individually for each power outlet. Settings can
be always On, Always Off or Last memorized Status before power failure.
Command to be sent to the ePowerSwitch 8XS:
DPxy=z[CR]
Reply from the ePowerSwitch 8XS:
DPxy=z[CR]
Explanations:
Parameter Value Function/Remark
x address of the ePowerSwitch 1 to 16 specifies the number of the ePowerSwitch 8XS
y number of the...](http://img.usermanuals.tech/thumb/176/2339/w64_epower-switch-8-slave-manual-1478560081_d-17.png "Page 18
Page | 16 User Guide
6.3.7. Setting the power up default status
This command enables to set the power up default status individually for each power outlet. Settings can
be always On, Always Off or Last memorized Status before power failure.
Command to be sent to the ePowerSwitch 8XS:
DPxy=z[CR]
Reply from the ePowerSwitch 8XS:
DPxy=z[CR]
Explanations:
Parameter Value Function/Remark
x address of the ePowerSwitch 1 to 16 specifies the number of the ePowerSwitch 8XS
y number of the...")
![Page 19
Page | 17 ePowerSwitch 8XS
6.3.9. Reading out the switching counter values of the relays
This command enables to read out the number of power up cycles of the ePowerSwitch 8XS and the
number of switching cycles (Off to On) of each power outlet.
Command to be sent to the ePowerSwitch 8XS:
Cxy[CR]
Reply from the ePowerSwitch 8XS:
Cxy=z[CR]
Explanations:
Parameter Value Function/Remark
x address of the ePowerSwitch 1 to 16 specifies the address of the ePowerSwitch 8XS
y counter 0...](http://img.usermanuals.tech/thumb/176/2339/w64_epower-switch-8-slave-manual-1478560081_d-18.png "Page 19
Page | 17 ePowerSwitch 8XS
6.3.9. Reading out the switching counter values of the relays
This command enables to read out the number of power up cycles of the ePowerSwitch 8XS and the
number of switching cycles (Off to On) of each power outlet.
Command to be sent to the ePowerSwitch 8XS:
Cxy[CR]
Reply from the ePowerSwitch 8XS:
Cxy=z[CR]
Explanations:
Parameter Value Function/Remark
x address of the ePowerSwitch 1 to 16 specifies the address of the ePowerSwitch 8XS
y counter 0...")
![Page 20
Page | 18 User Guide
6.3.10. Resetting the switching counter values of the relays
This command enables to reset the switching counter values of the Relays.
Command to be sent to the ePowerSwitch 8XS:
/RC[CR]
Reply from the ePowerSwitch 8XS:
No reply
The ePowerSwitch 8XS accepts lower case and upper case commands.
The ePowerSwitch 8XS sends its reply only after having received a valid command terminated by
the character [CR].
6.3.11. Restoring to factory settings
This...](http://img.usermanuals.tech/thumb/176/2339/w64_epower-switch-8-slave-manual-1478560081_d-19.png "Page 20
Page | 18 User Guide
6.3.10. Resetting the switching counter values of the relays
This command enables to reset the switching counter values of the Relays.
Command to be sent to the ePowerSwitch 8XS:
/RC[CR]
Reply from the ePowerSwitch 8XS:
No reply
The ePowerSwitch 8XS accepts lower case and upper case commands.
The ePowerSwitch 8XS sends its reply only after having received a valid command terminated by
the character [CR].
6.3.11. Restoring to factory settings
This...")
Page | 19 ePowerSwitch 8XS Technical Data Network connection RJ-45 connector for UTP CAT5 Max. network cable length 100 meters (not included) Serial connection RS232, SUB-D 9 female Connection Bus RS-485, RJ-45 Nominal input voltage 230 V/50Hz Input power outlet IEC-320 Output voltage 230 V/50Hz Output power outlet IEC-320 Maximum total current 2 x 10 A LEDs 1 for power supply A 1 for power supply B 8 for the power outlets status Operating temperature 0°C to +40°C Operating humidity 10% to 80% Dimensions (LxDxH) 437 x 107 x 42 mm Weight 2 kg Approvals CE, EN 60950-1, EN 55022, EN 55024, RoHS
Page | 20 User Guide
Statement of Conformity
All modifications reserved
EPS 8XS User Guide 2011 02.docx
STATEMENT OF CONFORMITY
NEOL S.A.S. declares that this equipment is in compliance with the Electromagnetic
Compatibility Directive and the Low Voltage Directive:
Application of Council Directives: 2004/108/EEC
Standards to Which Conformity declared: EN 60950-1, EN 55022, EN 55024
Manufacturers Name and Address: NEOL S.A.S.
4 Rue Nationale
67800 BISCHHEIM -FRANCE
Type of Equipment: Power Control Unit
Type Designation: ePowerSwitch 8XS Satellite
Reference: EPS 8XS
Years of Manufacture: 2010 -2011
We, the undersigned, hereby declare that the equipment specified above
conforms to the above directives.
Bischheim, 1st February 2011
Paul REYSER,
General Manager
NEOL S.A.S.