ADDER ePower Switch 1 Guard Manual

							 
40
5.2. Technical Data 
 
Network standards: 
IEEE 802.3, 10 / 100 BASE-T 
Network protocols: 
TCP/IP, HTTP 
Network connection: 
RJ-45 connector for STP CAT5  
Max. network cable length 100 meters 
Serial connection: 
RS232, SUB-D 9 female 
Operating temperature: 
0°C to +40°C 
Operating humidity: 
10% to 80% RH (not condensing) 
Dimensions (LxDxH): 
185 x 103 x 43 mm 
Weight: 
1 kg 
Approvals: 
CE, EN 60950-1, EN 55022, EN 55024 
 
 
5.3. Commonly used Ports 
 
TCP 80:   This port is used for http connections. 
UDP 123: This port is used to allow time synchronization over NTP (Network Time Protocol). 
UDP 161: This port is used for SNMP Requests. 
UDP 162: This port is used for SNMP Traps. 
UDP 514: This port is used to deliver Syslog messages. 
   
						

							41 
5.4. Syslog Messages: Severity Level Definitions 
 
The Emergency level is the most severe type of message generated by ePowerSwitch 1GR2 and the 
Debug severity level is the least severe one. 
 
Severity Level 0, Emergency: 
The following messages appear at severity 0: 
- Continuous error! 
Severity Level 1, Alert: 
The following messages appear at severity 1: 
- Settings have been reinitialized through the serial connection 
- ePowerSwitch 1G
R2 does not respond 
Severity Level 2, Critical: 
The following messages appear at severity 2:  
- file config corrupted: restoring default values 
Severity Level 3, Error: 
ePowerSwitch 1G
R2 doesnt generate Severity Level 3. 
Severity Level 4, Warning: 
The following messages appear at severity 4:  
- Settings have been changed through the serial connection 
- Settings have been changed through the network by User name 
Severity Level 5, Notice: 
The following messages appear at severity 5:  
- System has been restarted through the serial connection 
- Power Supply restored 
- Rule (number) : Outlet (number) has been switched ON 
Severity Level 6, Informational: 
The following messages appear at severity 6: 
- System has been started 
- Date & Time have been synchronized to a Network Time Server 
- User name : Outlet (number) has been switched ON 
- Session opened by user name 
Severity Level 7, Debug: 
ePowerSwitch 1G
R2 doesnt generate Severity Level 7.  
						

							 
42
STATEMENT OF CONFORMITY 
  
 
 
  
 
All modifications reserved 
 
 
 
STATEMENT OF CONFORMITY 
 
 
NEOL S.A.S. declares that this equipment is in compliance with the Electromagnetic 
Compatibility Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC 
 
 
Application of Council Directive:       2004/108/EEC 
 
Standards to Which  
Conformity declared:        EN 60950-1, EN 55022, EN 55024 
 
Manufacturers Name and Address:     NEOL S.A.S 
                4 Rue Nationale 
                67800 BISCHHEIM -FRANCE 
 
Type of Equipment:         Power distribution and control unit 
 
Type Designation:         ePowerSwitch 1GR2  
 
Reference:            ePowerSwitch 1GR2 
  
Years of Manufacture:        2011 
 
We, the undersigned, hereby declare that the equipment specified above conforms  
to the above directives. 
 
Bischheim, 17th February 2011 
 
Paul REYSER,  
 
General Manager  
NEOL S.A.S.