Adam Equipment MDW Mechanical Physician Scales MDW160MREVB4 User Manual

							                                     © Adam Equipment Company 2014 
To weigh a person - 
 
·  The person to be weighed can now step onto the sca le platform. 
 
·  The lever will move away from it original position .  
 
·  Move  the  balancing  masses  along  the  calibrated  lev er  arms  to 
return the lever to the horizontal position.  
 
·  For this the bigger balancing mass should be moved  first and then 
the smaller one for finer adjustment. 
 
·  NOTE:   While  moving  the  lower  (larger)  balancing  mass alo ng  the 
lower arm of the lever, make sure that it sits in o ne of the notches 
properly. In that case, its upper pointer will be i n line with one of the 
markings of the lower arm of the lever. The reading  at this marking 
will  indicate  the  weight  of  the  person  using  the  la rger  balancing 
mass. 
 
·   The upper (smaller) balancing mass is now moved al ong the upper 
arm  of  the  lever  till  the  lever  returns  to  its  orig inal  horizontal 
position. This is to obtain the finer weight. The r eading at this point 
is noted. 
 
·   The  total  reading  of  the  two  balancing  masses  will   give  the  final 
weight of the person on the platform. 
  
    For example,   
    
                   Lower mass 60 kg + Upper mass 2. 5 kg  
                   = Total weight of the person is  62.5 kg. 
    
						

							                                     © Adam Equipment Company 2014 
    
						

							                                     © Adam Equipment Company 2014 
  
    
						

							                                     © Adam Equipment Company 2014 
WARRANTY INFORMATION 
 
Adam Equipment offers Limited Warranty (Parts and L abour) for the components failed due to 
defects in materials or workmanship.  Warranty starts from the date of delivery. 
 
During the warranty period, should any repairs be necessary, the purchaser must inform its 
supplier or Adam Equipment Company. The company or  its authorised Technician reserves the 
right to repair or replace the components at any of its workshops depending on the severity of 
the problems. However, any freight involved in send ing the faulty units or parts to the service 
centre should be borne by the purchaser. 
 
The warranty will cease to operate if the equipment is not returned in the original packaging 
and with correct documentation for a claim to be processed. All claims are at the sole discretion 
of Adam Equipment. 
 
This warranty does not cover equipment where defect s or poor performance is due to misuse, 
accidental damage, exposure to radioactive or corrosive materials, negligence, faulty 
installation, unauthorised modifications or attempted repair or failure to observe the 
requirements and recommendations as given in this U ser Manual. Additionally rechargeable 
batteries (where supplied) are not covered under warranty. 
        
Repairs carried out under the warranty does not extend the warranty period. Components 
removed during the warranty repairs become the comp any property. 
        
The statutory right of the purchaser is not affected by this warranty. The terms of this warranty 
is governed by the UK law. For complete details on  Warranty Information, see the terms and 
conditions of sale available on our web-site.  
						

							© Adam Equipment Company 2014 
 
 
 
     
Manufacturer’s Declaration of Conformity 
 Adam Equipment Co. Ltd. 
Maidstone Road, Kingston  Milton Keynes, MK10 0BD 
United Kingdom 
 
www.adamequipment.com  
This product has been manufactured in accordance wi th the harmonised European standards, following the 
provisions of the below stated directives:   
2001/95/EC , General Product Safety Directive    EN  349:1993+A1:2008  
Safety of machinery - Minimum gaps to avoid 
crushing of parts of the human body 
 
2011/65/EC, RoHS, on the Restriction of the  
use of certain hazardous substances in 
electrical and electronic equipment (recast) 
 
Restricted substances referred to in Article 4(1) a nd 
maximum concentration values tolerated by weight in  
homogeneous materials do not exceed prescribed 
limits. 
    
						

							© Adam Equipment Company 2014 
  
ADAM EQUIPMENT
 is an ISO 9001:2008 certified global organisation  with more than 
40  years  experience  in  the  production  and  sale  of  e lectronic  weighing  equipment. 
Products  are  sold  through  a  world-wide  distributor  network  supported  from  our 
company locations in the UK, USA, AUSTRALIA and SOU TH AFRICA.  
  
ADAM ’s products are predominantly designed for the Labo ratory, Educational, Health 
and Fitness and Industrial Segments. The product ra nge is as follows: 
  -Analytical and Precision Laboratory Balances 
-Top Loading Scales for Educational establishments 
-Counting Scales for Industrial and Warehouse appli cations 
-Digital Weighing/Check-weighing Scales 
-High performance Platform Scales with extensive so ftware  
 features including parts counting, percent weighin g etc. 
-Crane scales for heavy-duty industrial weighing 
-Digital Electronic Scales for Health and Fitness u se 
-Retail Scales 
  
Adam Equipment Co. Ltd. 
Maidstone Road, Kingston  Milton Keynes MK10 0BD 
UK  
Phone:+44 (0)1908 274545  Fax: +44 (0)1908 641339   
e-mail: 
[email protected] Adam Equipment Inc. 
26, Commerce Drive  Danbury, CT 06810 
USA   
Phone: +1 203 790 4774  Fax:  +1 203 792 3406   
e-mail: 
[email protected] 
Adam Equipment S.A. (Pty) Ltd. 
P.O. Box 1422 
Kempton Park 1620  Johannesburg 
Republic of South Africa   
Phone +27 (0)11 974 9745  Fax:  +27 (0)11 392 2587   
e-mail: 
[email protected] 
 
   
© Copyright by Adam Equipment Co. Ltd.  All rights  reserved.  No part of this 
publication may be reprinted or translated in any f orm or by any means without the 
prior permission of Adam Equipment.   
Adam Equipment reserves the right to make changes t o the technology, features, 
specifications and design of the equipment without  notice. 
 
All information contained within this publication i s to the best of our knowledge timely, 
complete and accurate when issued.  However, we are  not responsible for 
misinterpretations which may result from the readin g of this material. 
 
The latest version of this publication can be found  on our Website. 
  Visit us at www.adamequipment.com