Adam Equipment MCW Chair Weighing Scale MCW300L User Manual

© A dam Equipment  Company 2012              P age 9   
10. Feed t he cable f rom t he Indicat or t hrough t he pillar  
11.  Connect  t he p illar t o t he Indicat or using t he 4  x M 4  x 
8   screw s provided  
 
 
 
 
 
C  O  P Y  

© A dam Equipment  Company 2012              P age 10   
12. Feed t he cable t hrough t he t ube on t he base  
13.  Connect  t he pillar t o t he base and t ight en t he allen      
screw  t o secure in t he correct  view ing posit ion  
 
 
 
 
C  O  P Y  

© A dam Equipment  Company 2012              P age 11   
1 4 .  Connect  t he Indicat or cable t o t he load cell cable    
connect or ensuring t o t hread t he cable t hrough t he 
bracket  under t he base  
  1 5 .  Secure t he cables using t he P clip and M 4  x 8  screw       
        provided  
 
 
 
 
 
 
C  O  P Y  

© A dam Equipment  Company 2012              P age 12   
 1 6 .  Connect  t he handle using t he 4  x M 5  x 3 0  screw s    
provided  
 
 
 
 
 
 
C  O  P Y  

© A dam Equipment  Company 2012              P age 13   
 17.  Connect  t he t w o arm rest s using t he 4  x M 6  
w ashers and 4  x M 6  x 2 0  socket  head screw s 
provided  
 
 
 
 
 
C  O  P Y  

© A dam Equipment  Company 2012              P age 14   
1 8 .  Place t he chair assembly ont o t he base and secure 
using t he 4  x M 5  x 1 5  screw s provided  
 
 
 
 
 
 
 
C  O  P Y  

© A dam Equipment  Company 2012              P age 15   
1 9 .  Place t he f oot  rest  ont o t he assembly and se cure 
using t he 4 x M5 x 15 screws provided      
 
 
 
 
C  O  P Y  

© A dam Equipment  Company 2012              P age 16   
5.0  FUNC TION 
 
5.1 WEIGHING  
 
•  Position  the Scale on an even floor  and press the  [On/Off] key .  
 
• The instrument  performs a self -test after which it  is  ready for operation.   
 
• Press the  [On/ Off]  key  and the mac hine switches off.   
 
• The person to be weighed  can sit on to the chair  once the scale shows 
0.0 on the display. The weight will be display in Kg. or lb. depending on 
the units chosen by the user.   
 
•  If...

© A dam Equipment  Company 2012              P age 17   
5.2 MEASURING BODY MASS INDEX (BMI)    
 
• Once the height has been determined it  is possible to enter the height 
reading into the display  ready for the scale to  compute  the BMI.   
 
• Press and hold the [Unit/BMI]  key to enter the BMI mode.  The display 
will  show the last height value used,   “Cm123 ” or “In123” depending on 
which weighing unit you are currently using . 
 
•  The height entry unit  (Cm or In) will be flashing to show...

© A dam Equipment  Company 2012              P age 18   
 
6.0 
CALIBRA TION 
 
Before calibrating the scale, you should ensure that you have a suitable known 
weight for calibration.   
 
1.  When in normal weighing mode with the scale at zero press and hold down 
[TARE]  and [ON / OFF]  keys to enter the calibration mode.   
 
2.  If the calibration switch is in the off  position on the main PCB inside the scale, the 
indicator will show “ CAL.OFF ” and then exit this mode. If the indicator shows 
“C...