Adam Equipment GBC Bench Counting Scales GBCGFCREVB4 User Manual

 P a g e 29                       © Adam Equipment Company 2014 
12.1.1  F1 -CALIBRATION 
To enter the calibration parameter, press the  [Tare] key when  “F1” “CAL” is displayed.  
The  scale  should  be  calibrated  using  a  mass  of  appr oximately  2/3Maximum  to  
Maximum.  If the scale has been calibrated previous ly the value will be stored.  Details 
of calibration are given is section 8.0 . 
 
12.1.2  F2 –PIN  
·   To enter this parameter, press the  [Tare] key when  “F2”   “Pin”  is shown. 
·...

 P a g e 30                       © Adam Equipment Company 2014 
13.0  REPLACEMENT PARTS AND ACCESSORIES 
If you need to order any spare parts and accessorie s, contact your supplier or Adam 
Equipment. A partial list of such items is as follo ws- 
· Main Power cord 
·   Power supply  (GFB/GFC-a) 
·   Replacement Battery · Stainless steel Pan 
·   In use cover 
·   Printer 
 
  

 P a g e 31                       © Adam Equipment Company 2014 
14.0  SERVICE INFORMATION  
This manual covers the details of operation. If you  have a problem with the scale that 
is not directly addressed by this manual then conta ct your supplier for assistance. In 
order to provide further assistance, the supplier w ill need the following information 
which should be kept ready: 
 
A. Details of your company 
    -Name of your company: 
    -Contact person’s name:  
    -Contact telephone, e-mail,...

 P a g e 32                       © Adam Equipment Company 2014 
15.0  WARRANTY INFORMATION    
Adam  Equipment  offers  Limited  Warranty  (Parts  and  L abour)  for  the  components  failed  due  to  defects 
in materials or workmanship.  Warranty starts from the date of delivery. 
 
During the warranty period, should any repairs be n ecessary, the purchaser must inform  its supplier or 
Adam  Equipment  Company.  The  company  or  its  authoris ed  Technician  reserves  the  right  to  repair  or...

 
© Adam Equipment Company 2014 
 
      
Manufacturer’s Declaration of Conformity   
Adam Equipment Co. 
Maidstone Road, Kingston  Milton Keynes, MK10 0BD  United Kingdom  
This product has been manufactured in accordance wi th the harmonised European standards, 
following the provisions of the below stated direct ives: 
 
2004/108/EC, Electro Magnetic Compatibility  
Directive   Standard EN61326-1:2013, Electrical 
Equipment for Measurement, Control and  
Laboratory Use – EMC requirements – Part 1:...

 
© Adam Equipment Company 2014 
 
 
ADAM EQUIPMENT is an ISO 9001:2008 certified global company with  more than 
40 years experience in the production and sale of e lectronic weighing equipment.  
  
Adam  products  are  predominantly  designed  for  the  La boratory,  Educational, 
Health  and  Fitness,  retail  and  Industrial  Segments.   The  product  range  can  be 
described as follows:    -Analytical and Precision Balances  
-Compact and Portable Balances  
-High Capacity Balances  
-Moisture...