Adam Equipment GBC Bench Counting Scales GBCGFCREVB4 User Manual
Here you can view all the pages of manual Adam Equipment GBC Bench Counting Scales GBCGFCREVB4 User Manual. The Adam Equipment manuals for Scale are available online for free. You can easily download all the documents as PDF.
Page 1
© Adam Equipment Company 2014
Adam Equipment
GBC/GFC Series
(P.N. 3056610587, Revision B4, Apr 2014)
Software Rev 2.18 and up
Page 2
© Adam Equipment Company 2014
Easy Reference:
Model name of the indicator/scale:
Serial number of the unit:
Software revision number
(Displayed when power is first turned on):
Date of Purchase:
Name of the supplier and place:
Page 3
P a g e 1 © Adam Equipment Company 2014 1.0 CONTENTS 1.0 CONTENTS .......................................... ................................................ 1 2.0 INTRODUCTION ...................................... ............................................. 3 3.0 INSTALLATION .................................................................................... 6 3.1 UNPACKING ...................................................................................... 6 3.2...
Page 4
P a g e 2 © Adam Equipment Company 2014
Page 5
P a g e 3 © Adam Equipment Company 2014 2.0 INTRODUCTION · The GBC/GFC series provides accurate, fast and versatile parts counting scales. · There are 2 types of scales within the GBC/GFC series: GBC/GFC scales are kilogram/gram scales and the GBC/GFC-a scales are changeable from pounds to kilograms if the user requires it. The scales have the same functions except that GBC/GFC-a scales have the ability to toggle between the weig hing...
Page 6
P a g e
4
© Adam Equipment Company 2014
SPECIFICATIONS GBC Models
Model #
GBC 16 GBC 32 GBC 60
GBC 35a
GBC 70a
GBC 130a
Maximum Capacity
16kg 32kg 60kg 16kg/35lb 32kg/70lb 60kg/130lb Readability 0.5g 1g 2g 0.5g/0.001lb 1g/0.002lb 2g/0.005lb Repeatability (Std Dev)
0.5g 1g 2g 0.5g/0.001lb 1g/0.002lb 2g/0.005lb Linearity +
1g
2g
4g
1g/0.002lb
2g/0.004lb
4g/0.01lb
Units of Measure Kilograms and Grams. Pounds for GBC XXa units...
Page 7
P a g e
5
© Adam Equipment Company 2014
GFC Models
Model #
GFC 75 GFC150 GFC 300 GFC 165a GFC 330a GFC 660a
Maximum Capacity
75kg 150kg 300kg 75kg / 165lb 150kg / 330lb 300kg / 660lb Readability
5g 10g 20g 5g / 0.01lb 10g / 0.02lb 20g / 0.05lb Repeatability (Std Dev) 5g 10g 20g 5g / 0.01lb 10g / 0.02lb 20g / 0.05lb Linearity +
10g 20g 40g 10g / 0.02lb 20g / 0.04lb 40g / 0.1lb
Units of Measure Kilograms and Grams. Pounds for GFC XXa...
Page 8
P a g e 6 © Adam Equipment Company 2014 3.0 INSTALLATION 3.1 UNPACKING The user’s application and the technical specificat ions of the platform or load cell will determine the necessary configuration. 3.2 LOCATING · The scales should not be placed in a location that will reduce the accuracy. · Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents. · Avoid unsuitable tables. The table or floor must...
Page 9
P a g e 7 © Adam Equipment Company 2014 3.3 SETTING UP THE SCALES · The pillar is attached to the base using a bracket that must be attached to the base frame first using the 4 bolts supplied. The pillar is secured to the bracket using 2 sets of screws. The cable from the base to the indicator module is run through the tube and taken out through the plastic support at the top. Excess cable can be st ored within the tube. · The GBC/GFC...
Page 10
![Page 10
P a g e 8 © Adam Equipment Company 2014
4.0 KEY DESCRIPTIONS
Keys Functions
[0-9, .] Numeric entry keys, used to manually enter a value for tare weights, unit
weight, and sample size.
[CE] Used to clear the unit weight or an erroneous entry .
[M+] Add the current count to the accumulator. Up to 99 values or full capacity of
the weight display can be added. Also prints the di splayed values when Auto
print is switched off.
[MR] To recall the accumulated memory....](http://img.usermanuals.tech/thumb/168/2134/w300_gbc-bench-counting-scales-gbcgfcrevb4-1478547421_d-9.png "Page 10
P a g e 8 © Adam Equipment Company 2014
4.0 KEY DESCRIPTIONS
Keys Functions
[0-9, .] Numeric entry keys, used to manually enter a value for tare weights, unit
weight, and sample size.
[CE] Used to clear the unit weight or an erroneous entry .
[M+] Add the current count to the accumulator. Up to 99 values or full capacity of
the weight display can be added. Also prints the di splayed values when Auto
print is switched off.
[MR] To recall the accumulated memory....")
P a g e 8 © Adam Equipment Company 2014 4.0 KEY DESCRIPTIONS Keys Functions [0-9, .] Numeric entry keys, used to manually enter a value for tare weights, unit weight, and sample size. [CE] Used to clear the unit weight or an erroneous entry . [M+] Add the current count to the accumulator. Up to 99 values or full capacity of the weight display can be added. Also prints the di splayed values when Auto print is switched off. [MR] To recall the accumulated memory....