Adam Equipment Coin Counting Scale CCSArevA1 User Manual

9 | P a g e   © Adam Equipment Company 2009 
2.6  BACKLIGHT OPERATION 
 The  LCD  display  has  a  backlight  that  operates  autom atically.  To 
maximise  the  battery  life  it  may  be  necessary  to  tu rn  the  backlight 
off. 
 
  Hold  the  [Print]  key  for  4  seconds  to  enter  the  backlight  control 
mode. Use the  [MC / ] key to change the setting for the backlight to 
OFF, ON (set to on for full time) or AUTO (set to o n only when there 
is a weight on the scale). 
2.7  TEMPORARY...

10 | P a g e    © Adam Equipment Company 2009 
 
“Y-m-d ”   year, month, day 
“ m-d-Y ”   month, day, year 
“ d-m-Y ”   day, month, year 
 
  Press the  [Total/


] key to accept the chosen format and then enter the  
date in this format.   
 
  Press the  [Total/


] key to accept the date. 
  
An error code will be shown if the time ( Err 1) or the date ( Err 2) is not the 
permissible values.   For example, 34
th day of a month is an invalid entry. 
      

11 | P a g e    © Adam Equipment Company 2009 
 
3.0  BASIC OPERATION 
3.1  ZEROING THE DISPLAY 
 
 Press  the  [>ZZZ

12 | P a g e    © Adam Equipment Company 2009 
 When  both  the  product  and  container  are  removed  the  Quantity  
and  TOTAL  display will show bars “- - - - -“ as the weight i s below 
zero. 
 
  If  a  different  container  is  to  be  used,  remove  this   negative  tare 
value by pressing the  [Tare] key once more. 
 
  Any  time  the  weight  is  negative,  only  bars  will  be  shown  in  the 
TOTAL  display “- - - - - “. 
 
3.3 COIN COUNTING 
 
  To  count  coins  simply  place  the...

13 | P a g e    © Adam Equipment Company 2009 
  
3.4 MEMORY
 ACCUMULATIONS 
 
 When  the  coins  have  been  counted  it  is  possible  to  store  the 
results of this sample into memory by pressing  [M+].   
 
  The  displays  will  show  a  number  corresponding  to  th e  item 
number  in  memory  ( Denomination  display  “1 ”)  and  the  total 
quantity  of  coins  counted  in  memory  ( Quantity  display)  and  the 
total  value  of  coins  that  have  been  stored  into  mem ory  (TOTAL...

14 | P a g e    © Adam Equipment Company 2009 
  
Press [M+]  
 “  3   ”   “    498”  “   175.50” 
 
 After  2  seconds  the  scale  will  return  to  normal  ope ration.    The 
weight  on  the  scale  must  return  to  zero  before  anot her  value  is 
allowed to be stored into memory. 
 
NOTE :    Tokens  cannot  be  added  to  memory  as  they  do  not  h ave  a  value 
associated with them. 
 
 If tokens are to be added to memory with coins, an  error message 
will be displayed:   
 
 “   ErrOr...

15 | P a g e    © Adam Equipment Company 2009 
 
3.5 MEMORY RECALL 
 
 Pressing  the  [MR] key  will  allow  you  to  view  each  set  of  data 
stored into the memory.    
 The  first  time   [MR] is  pressed  the  first  set  of  data  is  shown  with 
Denomination  window showing “  ≡ 1   ≡” for 1 second followed by 
the  Denomination , Quantity   and TOTAL   windows  showing  the 
quantity and value for this first item. 
 
“   1   ”   “         ”  “             ” for 1 second and then 
    “...

16 | P a g e    © Adam Equipment Company 2009 
4.0  RS-232 INTERFACE 
The  Scale  includes  a  RS-232  output  as  standard.    The  RS-232  allows  a 
record to be sent to a serial printer as work is do ne on the scale. 
  
4.1  RS-232
 OUTPUT 
 
The  RS-232  interface  is  bi-directional  with  command s  that  function  similar  to 
some of the front panel keys and other commands to  input data into the scale 
for  coin  weights,  denominations  and  symbols  used.    The  parameters  for  the 
RS-232...

17 | P a g e    © Adam Equipment Company 2009 
  
A display produced as shown in the previous example is as follows: 
 
“    0.20 ”   “    285”  “   57.00” 
  
Press  [M+]  
 
“   1   ”   “    285”  “   57.00” 
     
  
Printed record shows as follows: 
 
  
Any  time  the  [Total  /


]  key  is  pressed  the  current  totals  held  in  memory  ar e 
printed.    After  the  2
nd  weighing  in  the  previous  sample,  the  printed  recor d 
shows as follows:  
Date:      2009/01/05  
Time:...

18 | P a g e    © Adam Equipment Company 2009 
  
The [MC/ 


]  key  is  active  when  the  total  values  are  displayed.   If [MC/ 


] is 
pressed the memory will be cleared.   
After 2 seconds the scale will return to normal ope ration.   
 
The  [Print]   key  will  record  a  list  of  all  sets  of  data  stored  in  the  memory  and 
the total amounts.  For the sample above, the print ed record is: 
 
 
 
Date:      2009/01/05 
Time:        12:23:15 
    
Record        1  
Denomination    0.20...