Acumen Camera NVR Series AiPF4U User Manual
Here you can view all the pages of manual Acumen Camera NVR Series AiPF4U User Manual. The Acumen manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 51
AiP -N series 16CH/9 CH/4 CH Manual 50 If your NVR has Internet access it will automatically try and register at www.ddnsipcam.com . It will automatically use the last 5 digits of the NVR’s MAC address as the host name. For access enter http://10685D (last 6 digits of MAC). ddnsipcam.com into your browser...
Page 52
AiP -N series 16CH/9 CH/4 CH Manual 51 The NVR can have up to 3 network ranges to see cameras across multiple subnet ranges 1.6 System setup To set up the system settings, use the following instructions: 1.6-1 Date/Time Press enter to set Date/Time on the NVR. The display format can also be set...
Page 53
AiP -N series 16CH/9 CH/4 CH Manual 52 1.6-2 HDD Info HDD INFO shows the following information: Model — HDD model Size —the capacity of the hard disk drive Status — indicates whether the HDD is formatted or unformatted Select — “□“ indicates that the HDD...
Page 54
AiP -N series 16CH/9 CH/4 CH Manual 53 Admin (default password 1111) Operator (default password 2222) Guest (default password 3333) Users 1 to 12 Once a user is selected you can edit passwords, enable password protection and set up the following user rights: Allow Setup Allow Playback Allow...
Page 55
AiP -N series 16CH/9 CH/4 CH Manual 54 1. Plug in a portable USB disk at the NVR ’s USB port 2. Press Enter to start firmware update 3. After the transfer has finished, remove the USB device and reboot the NVR. 4. Ensure that the firmware is located in the firmware directory of the USB disk...
Page 56
AiP -N series 16CH/9 CH/4 CH Manual 55 1.7 PTZ setup The NVR can control RS-485 PTZ or IP PTZ cameras. To setup PTZ connection, follow these instructions: 1.7-1 Camera select Use the directional arrows to select the camera you wish to edit 1.7-2 PTZ transport Select from...
Page 57
AiP -N series 16CH/9 CH/4 CH Manual 56 1.7-4 PTZ model and baud rate If the PTZ protocol is transmitted via traditional RS-485 wires attached to the NVR you need to setup the baud rate and RS-485 ID respectively. Table below shows listed models in the PTZ protocol list: Model B aud Rate Number of Bytes...
Page 58
AiP -N series 16CH/9 CH/4 CH Manual 57 Iris and auto iris Adjust these settings as required Focus and auto focus Adjust these settings as required Save presets Once the above parameters are entered, the preset can be saved. Clear all presets To clear all the preset points of a PTZ camera,...
Page 59
AiP -N series 16CH/9 CH/4 CH Manual 58 2. Web-based Viewing/Setup There are two ways of remotely accessing the NVR: 1. Via a network through your Internet browser 2. Via AIM software (for AIM setup see AIM manual) Live monitoring, menu setup, video playback, and file backup can be done by using your...
Page 60
AiP -N series 16CH/9 CH/4 CH Manual 59 2.3 Configuring the NVR via web page Features of the NVR’s main menu system can be configured via web interface. Features such as camera, alarm, recording, network, and backup can all be set up remotely 2.3-1 Camera setting ...