Acumen Camera NVR Series AiPF4U User Manual
Here you can view all the pages of manual Acumen Camera NVR Series AiPF4U User Manual. The Acumen manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 41
AiP -N series 16CH/9 CH/4 CH Manual 40 To setup an AiP camera, follow these instructions. Camera IP address: the IP address of the AiP camera Camera HTTP port: the HTTP port number of the IP address (default 80) Video RTSP port: the RTSP port number of the IP address (default 554) Username:...
Page 42
AiP -N series 16CH/9 CH/4 CH Manual 41 If the IP addresses of the installed AiP cameras have not already been configured, they can be changed by highlighting the channel and entering the new IP address 1.1-9 Camera Disable (Secured Record ing Channel) Channel enable feature can disable the live video of a...
Page 43
AiP -N series 16CH/9 CH/4 CH Manual 42 1.2 Monitor Setup For setting up HDMI, VGA, and backlight saving, follow these instructions 1.2-1 . Video advance To setup brightness, contrast, and saturation of a HDMI LCD monitor 1.2-2 . Backlight saving Adjusting backlight saving % reduces...
Page 44
AiP -N series 16CH/9 CH/4 CH Manual 43 To setup brightness, contrast, hue, sharpness and saturation of VGA LCD monitor 1.2-6 VGA output resolution Set accordingly to match your VGA monitor resolution 1.3 Record setup Record setup menu allows for setting recording features such as record quality, frame...
Page 45
AiP -N series 16CH/9 CH/4 CH Manual 44 The NVR is limited to a maximum of 48 MBPS (16 Channel) network throughput. For managing network bandwidth, use Record Advance. Each Camera can be set to the desired bit rate and frame rate. HD settings are for full screen recording whilst SD relates to multi view...
Page 46
AiP -N series 16CH/9 CH/4 CH Manual 45 When weighted recording is activated, the standard camera recording frame rate is increased to the pre- determined rate (set in advance recording), once an alarm is detected by NVR. Without an alarm the camera will record at 1FPS. 1.3-9 Schedule table The schedule...
Page 47
AiP -N series 16CH/9 CH/4 CH Manual 46 1.4 Alarm setup Alarm setup menu allows the settings of external alarm switches, motion alarm, buzzer, and alarm recording duration to be changed. To change these settings, enter the Alarm setup menu and follow the instructions: 1.4-1 Camera select Use the...
Page 48
AiP -N series 16CH/9 CH/4 CH Manual 47 1.4-2 Alarm input type The NVRs alarm inputs can be configured as normally open (N/O) or normally closed (N/C) for AiP cameras where the alarm signal from an AiP camera activates an alarm. 1.4-3 Motion enable ‘Motion Enable’ enables motion alarm recording, after the...
Page 49
AiP -N series 16CH/9 CH/4 CH Manual 48 1.4-7 SMTP setup NVR is capable of sending JPEG snapshots to an email account when an alarm event is triggered. To enable this feature, you must type in the relevant email account information. 1.4-8 FTP setup The NVR is capable of alarm snapshot to an FTP server. To...
Page 50
AiP -N series 16CH/9 CH/4 CH Manual 49 1.5-2 IP address Enter the IP address for the NVR using the virtual keyboard 1.5-3 Subnet mask Enter the Subnet Mask for the network using the virtual keyboard 1.5-4 gateway Enter the Gateway address for the network using the virtual keyboard 1.5-5 Default...