Acumen Camera NVR Series AiM HD 26 Software User Manual
Have a look at the manual Acumen Camera NVR Series AiM HD 26 Software User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Acumen manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
AiP -N series 16CH/9 CH/4 CH Manual 60 HTTP Port —HTTP port of the AiP camera RTSP Port —RTSP port of the AiP camera Username – username of the AiP camera Password – password of the AiP camera Camera Enable —enable or disable live video on main monitor 2.3-2 Recording setting Current Record Mode —current NVR recording mode HDD Overwritten —option for circular recordi ng Camera Recording Mode --assign schedule recording or no recording for a camera Camera FPS —recording frame rate for a camera Camera Resolution —Setup the HD or SD resolution for a camera 2.3-3 Recording schedule table Users can setup the record sch edule table via the Internet browser by specifying the day and time for the recording mode 2.3-4 Alarm setting
AiP -N series 16CH/9 CH/4 CH Manual 61 Buzzer Enable —enable/disable NVR buzzer Motion Enable —enable/disable motion detection Motion Detection Area — enable/disable motion detection area Alarm Input Type —set alarm input as NO/NC or disable Alarm Output Time —assign alarm time for each camera Buzzer Output Time —assign buzzer time for each camera 2.3-5 Alarm e -mail Enable Alarm Email —option for enable alarm/motion email From —from email address To—to email address Host/IP Address —SMTP mail server’s IP or DNS address Authentication —option for user and password authentication Email Account —senders email account Email Password —senders email account’s password JPEG File —option for the enable JPEG file attachment Email Test —simple the Email function testing
AiP -N series 16CH/9 CH/4 CH Manual 62 2.3-6 Network setting IP Address —NVR’s IP address Subnet Mask —subnet mask Gateway IP Address —router/Gateway IP address PPPoE account —PPPoE protocol account name PPPoE password —PPPoE password Video Port —the NVR’s video port HTTP Port —HTML port number 2.3-7 System setting MAC Address: MAC address of the NVR Firmware: firmware version of the NVR Remocon ID: addressable NVR ID for multiple NVRs remote control using remote controller and RS-485 keyboard Language: language selection of the NVR Max Connections: maximum network connections allowed for the NVR Force to Logout: force to logout remote access Software Reboot: software reboot of NVR system 2.3-7-1 Time Date: Current date of the NVR Time: Current time of the NVR
AiP -N series 16CH/9 CH/4 CH Manual 63 2.3-7-2 User setting There are three levels (admin, operator and guest) of user authentication allowed in the NVR. To change password, specify the old password, new password, and confirm password, edit as required. 2.3-7 -3 System status HDD(s) —HDD(s) detecting status for the NVR HDD Recording Start —start recording time of the NVR HDD Recording End – end recording time of the NVR HDD Percentage – recording percentage of the NVR Approximate Rec Days —total recording hours available for the HDD(s) Approximate Rec Hours—total recording days available for the HDD(s) Current Written HDD —the HDD of the NVR in writing Already Overwritten —the HDD(s) has been overwritten. HDD Writing Speed —HDD writing speed detector HDD Reading Speed —HDD reading speed detector Remocon ID —NVR ID/RS-485 ID Last Reboot Time – last time for rebooting the NVR Kernel — OS version of the NVR Temperature— NVR internal temperature indicator
AiP -N series 16CH/9 CH/4 CH Manual 64 Fan —fan failure indicator 2.3-7 -4 Firmware update This NVR is set to perform firmware upgrade via network. After the NVR receives the firmware, it starts to perform firmware upgrade automatically. After finishing the firmware update, the HTML page will reload. The user can then continue to operate the NVR. To perform network firmware update, click on Browse button and locate the firmware. Note: Ensure there is a good connection whilst attempting a firmware update. Failure in the network connection could result in firmware update failure and the unit may become non - operational.
AiP -N series 16CH/9 CH/4 CH Manual 65 Appendix A 1. Connection between a NVR and a RS-485 keyboard Directly connect the key board to the NVR’s keyboard input using an RJ -45 cable. The NVR provides 12V DC for the keyboard. There is no need to connect to your power adapter. NVR & keyboard connection diagram 2. Connections between NVR and IP PTZ cameras
AiP -N series 16CH/9 CH/4 CH Manual 66 3. Alarm I/Os and RS-485 for PTZ 16CH 9 CH/4 CH Appendix B RS -485 Input and Output Pin Assignment Pin 1 Alarm input 1 Pin 2 Alarm input 2 Pin 3 Alarm input 3 Pin 4 Alarm input 4 Pin 5 Alarm input 5 Pin 6 Alarm input 6 Pin 7 Alarm input 7 Pin 8 Alarm input 8 Pin 9 GND Pin 10 ALARM NO (normal open) Pin 11 ALARM NC (normal close) Pin 12 COM Pin 13 RS485+ Pin 14 RS485 - Pin 1 Alarm input 1 Pin 2 Alarm input 2 Pin 3 GND Pin 4 ALARM NO (normal open) Pin 5 ALARM NC (normal close) Pin 6 COM Terminal Name 1 -- 2 -- 3 -- 4 -- 5 RS - 485 – Out Link Keyboard 6 RS - 485 + Out Link Keyboard 7 GND 8 12V + DC input
AiP -N series 16CH/9 CH/4 CH Manual 67 Appendix C Hard Drive Support List Appendix D 1. Supported USB-DVD/RW Manufacturer Model SONY DRX - S30U - W LITE - ON eSAU108 LITE - ON eTAU108 LITE - ON eHAU424 - 01 2. Supported DVD Disk Brand Specification Ca pacity Max Speed Note Melody DVD - RW 4.7GB 4x Rewritable RiTEK DVD - RW 4.7GB 8x Rewritable Sony DVD+R 4.7GB 8x Burn once OEM disk DVD - R 4.7GB 8x Burn once Appendix E Supported USB Flash Disk Transcend: 8G 16G Brand Model Capacity WEST DIGITAL WD20EARX 2TB WD20EARS 2TB WD20EURS 2TB WD20EVDS 2TB WD15EURS 1.5TB WD10EZRX 1TB WD10EARX 1TB WD10EARS 1TB WD10EALX 1TB WD10EURS 1TB WD5000AVDS 500GB WD5000AVVS 500GB WD3200AVVS 320GB SEAGATE ST2000DM001 2TB ST1000DM003 1TB ST3500418AS 500GB ST3250318AS 250GB ST31608 15AS 160GB HITACHI HDS723020BLA642 2TB HDS721010DLE630 1TB
AiP -N series 16CH/9 CH/4 CH Manual 68 Kingston: 4G 8G 16G Sandisk: 8G 16G Appendix F H ard Disk Recording Table 4 CH Recording Resolution Standard Definition (SD) High Definition (HD) HDD Size 40 KB/PIC 102 KB/PIC 500 GB 1.5 Days 11 Hours 750 GB 2 Days 17 Hours 1000 GB 3 Days 23 Hours 2000 GB 6 D ays 47 Hours Recording days capacity is calculated by the following formula: 2TB HDD, Recording Resolution Setting to = “Standard” One day recording capacity of HDD = 40KB * 100 (Total FPS) *60 (Seconds) *60 (Minutes)* 24 (Hours) ÷ 1024 ÷ 1024 =330GB Approx. 2TB Recording Day(s) = 2000 GB ÷ 330GB = 6 Days 9 CH Recording Resolution Standard Definition (SD) High Definition (HD) HDD Size 40 KB / PIC 102 KB / PIC 500 GB 18 Hours 5 Hours 750 GB 1 Days 8 Hours 1000 GB 1.5 Days 11 Hours 2000 GB 3 Day s 23 Hours Recording days capacity is calculated by the following formula: For example: 2TB HDD, Recording Resolution Setting to = “Standard” One day recording capacity of HDD = 40KB * 200 (Total FPS) *60 (Seconds) *60 (Minutes)* 24 (Hours) ÷ 1024 ÷ 10 24 = 660GB Approx. 2TB Recording Day(s) = 2000 GB ÷ 660GB = 3 Days 16 CH Recording Standard Definition (SD) High Definition (HD)
AiP
-N series 16CH/9 CH/4 CH Manual
69 Resolution
HDD Size 40 KB / PIC 102 KB / PIC
500 GB 9 Hours 2.5 Hours
750 GB 12 Hours 4 Hours
1000 GB 18 Hours 5.5 Hou rs
2000 GB 1.5 Days 11.5 Hours
Recording days capacity is calculated by the following formula:
For example: 2TB HDD, Recording Resolution Setting to = “Standard”
One day recording capacity of HDD = 40KB * 400 (Total FPS) *60 (Seconds) *60 (Minutes)* 2 4
(Hours) ÷ 1024 ÷ 1024 = 1320GB
Approx. 2TB Recording Day(s) = 2000 GB ÷ 1320GB = 1.5 Days
Appendix G
Touch Screen Monitor Support List
ViewSonic: TD2220
Dell: ST2220T